Sony BPU-4500A Operating Instructions

4-739-701-

11

(1)

English

L-2_4-739-701-11(1)_201802221554_GB_1/25

Before operating the unit, please read this manual thoroughly and retain

it for future reference.

L-1_4-739-701-11(1)_201802221554_GB_2/25

WARNING

To reduce the risk of fire or electric shock, do not expose this

apparatus to rain or moisture.

To avoid electrical shock, do not open the cabinet. Refer servicing to

qualified personnel only.

S-1_4-739-701-11(1)_201802221554_GB_3/25

WARNING

This apparatus must be earthed.

S-2_4-739-701-11(1)_201802221554_GB_4/25

This symbol is intended to alert the user to the presence

of important operating and maintenance (servicing)

instructions in the literature accompanying the appliance.

S-14_4-739-701-11(1)_201802221554_GB_5/25

CAUTION

For safety, do not connect the connector for peripheral device wiring that

might have excessive voltage to the following port:

• LAN connector

S-28B_4-739-701-11(1)_201802221554_GB_6/25

WARNING:

THIS WARNING IS APPLICABLE FOR USA ONLY.

If used in USA, use the UL LISTED power cord specified below.

DO NOT USE ANY OTHER POWER CORD.

Plug Cap

Parallel blade with ground pin

(NEMA 5-15P Configuration)

Cord

Type SJT, three 16 or 18 AWG wires

Length

Minimum 1.5 m (4 ft 11 in), Less than

2.5 m (8 ft 3 in)

Rating

Minimum 10 A, 125 V

Using this unit at a voltage other than 120V may require the use of a

different line cord or attachment plug, or both. To reduce the risk of fire

or electric shock, refer servicing to qualified service personnel.

WARNING:

THIS WARNING IS APPLICABLE FOR OTHER COUNTRIES.

1.

Use the approved Power Cord (3-core mains lead) / Appliance

Connector / Plug with earthing-contacts that conforms to the safety

regulations of each country if applicable.

2.

Use the Power Cord (3-core mains lead) / Appliance Connector /

Plug conforming to the proper ratings (Voltage, Ampere).

If you have questions on the use of the above Power Cord / Appliance

Connector / Plug, please consult a qualified service personnel.

S-29D_4-739-701-11(1)_201802221554_GB_7/25

For the customers in the U.S.A.

This equipment has been tested and found to comply with the limits

for a Class A digital device, pursuant to part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against

harmful interference when the equipment is operated in a commercial

environment. This equipment generates, uses and can radiate radio

frequency energy and, if not installed and used in accordance with

the instruction manual, may cause harmful interference to radio

communications. Operation of this equipment in a residential area

is likely to cause harmful interference in which case the user will be

required to correct the interference at his own expense.

E-5_4-739-701-11(1)_201802221554_GB_8/25

You are cautioned that any changes or modifications not expressly

approved in this manual could void your authority to operate this

equipment.

E-7_4-739-701-11(1)_201802221554_GB_9/25

All interface cables used to connect peripherals must be shielded in

order to comply with the limits for a digital device pursuant to Subpart B

of part 15 of FCC Rules.

E-8_4-739-701-11(1)_201802221554_GB_10/25

This device complies with part 15 of the FCC Rules. Operation is subject

to the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received,

including interference that may cause undesired operation.

E-9_4-739-701-11(1)_201802221554_GB_11/25

For the customers in Canada

CAN ICES-3 (A)/NMB-3(A)

E-12_4-739-701-11(1)_201802221554_GB_12/25

For the customers in Europe

This product is intended for use in the following Electromagnetic

Environment: E4 (controlled EMC environment, ex. TV studio).

E-20_4-739-701-11(1)_201802221554_GB_13/25

WARNING

Operation of this equipment in a residential environment could cause

radio interference.

E-22H_4-739-701-11(1)_201802221554_GB_14/25


This apparatus shall not be used in the residential area.

E-36_4-739-701-11(1)_201802221554_GB_15/25

Caution

Use of controls or adjustments or performance of procedures other than

those specified herein may result in hazardous radiation exposure.

X-2_4-739-701-11(1)_201802221554_GB_16/25

Caution

The use of optical instruments with this product will increase eye hazard.

X-9_4-739-701-11(1)_201802221554_GB_17/25

This model (BASEBAND PROCESSOR UNIT) is classified as a CLASS 1

LASER PRODUCT.

X-3_4-739-701-11(1)_201802221554_GB_18/25

IEC 60825-1:2007 & IEC 60825-1:2014

X-7B_4-739-701-11(1)_201802221554_GB_19/25

경고

화재나 감전 위험을 방지하려면 장치가 물기나 습기에 노출되지 않도록 하십시오.

감전 위험이 있으므로 본체를 열지 마십시오. 자격 있는 전문 정비 요원만 서비스를

실시해야 합니다.

S-1_4-739-701-11(1)_201802221554_KR_20/25

경고

이 기기는 접지되어야 합니다.

S-2_4-739-701-11(1)_201802221554_KR_21/25

경고

경고

1.

해당되는 각 국가의 안전 규정을 준수하는 접지부가 있는 승인된 전원 코드(3 코어

메인 리드) / 어플라이언스 커넥터 / 플러그를 사용하십시오.

2.

정격 등급(전압 및 암페어)을 준수하는 전원 코드(3 코어 메인 리드) / 어플라이언스

커넥터 / 플러그를 사용하십시오.

위의 전원 코드 / 어플라이언스 커넥터 / 플러그 사용에 관한 질문은 자격 있는 전문 정비

요원에게 문의하십시오.

S-31_4-739-701-11(1)_201802221554_KR_22/25

이 기기는 업무용 환경에서 사용할 목적으로 적합성평가를 받은 기기로서 가정용 환경에서

사용하는 경우 전파간섭의 우려가 있습니다.

E-29_4-739-701-11(1)_201802221554_KR_23/25

For kundene i Norge

Dette utstyret kan kobles til et IT-strømfordelingssystem.

S-56_4-739-701-11(1)_201802221554_NO_24/25

For the customers in the U.S.A.

SONY LIMITED WARRANTY- Please visit http://www.sony.com/psa/

warranty for important information and complete terms and conditions

of Sony’s limited warranty applicable to this product.

For the customers in Canada

SONY LIMITED WARRANTY - Please visit http://www.sonybiz.ca/pro/

lang/en/ca/article/resources-warranty for important information and

complete terms and conditions of Sony’s limited warranty applicable to

this product.


Sony Professional Solutions Europe - Standard Warranty and Exceptions

on Standard Warranty. Please visit http://www.pro.sony.eu/warranty

for important information and complete terms and conditions.

For the customers in Korea

SONY LIMITED WARRANTY - Please visit http://bpeng.sony.co.kr/

handler/BPAS-Start for important information and complete terms and

conditions of Sony’s limited warranty applicable to this product.

L-5_4-739-701-11(1)_201802221554_GB_25/25

For the customers in Taiwan only

Türkiye’deki müşteriler için

AEEE Yönetmeliğine Uygundur

Overview

The BPU4500A Baseband Processor Unit connects to a CA4000 Camera System

Adaptor, mounted on a PMW-F55 Solid-state Memory Camcorder

1)

or an F65

Digital Motion Picture Camera

2)

, or to an HDC4300 Color Camera or HDC-P43

Multi Purpose Camera via an optical fiber cable. It processes video signals from

the camera and provides an interface with external devices.

1) Requires PMW-F55 software version 2.10 or later.

2) Requires the SKC-4065 F65 Adaptor.

Using the CD-ROM manuals

The manuals can be viewed on a computer with Adobe Reader installed.

You can download Adobe Reader for free from the Adobe website.

1

Open the "index.html" file on the CD-ROM.

2

Select the language of the manual you want to view.

Note

If you damage or lose the CD-ROM, you can purchase a new one from your

dealer or Sony service representative.

Specifications

General

Power requirement

100 V to 240 V AC, 50/60 Hz

Current consumption

2 A (max)

Operating temperature

5 °C to 40 °C (41 °F to 104 °F)

Storage temperature

–20 °C to +60 °C (–4 °F to +140 °F)

Mass

Approx. 8.6 kg (18 lb 15 oz)

Baseband Processor

Unit

Operation Guide

操作指南

© 2018 Sony Corporation

Printed in Japan

BPU4500A

Input/output connectors

CAMERA

Optical Fiber connector (1)

CCU

Optical Fiber connector (1)

REMOTE

8-pin multi-connector (1)

LAN

8-pin (1)

CAUTION

When you connect the LAN cable of the unit to

peripheral device, use a shielded-type cable to

prevent malfunction due to radiation noise.

Input connectors

AC IN

100 V to 240 V AC (1)

SDI1, SDI2

BNC type (2)

3G-SDI: SMPTE ST424/425,

2.970 Gbps/2.967 Gbps

HD-SDI: SMPTE ST292, 0.8 Vp-p, 75 Ω,

1.485 Gbps/1.4835 Gbps

REFERENCE IN

BNC type (1)

HD: SMPTE ST274, tri-level sync, 0.6 Vp-p, 75 Ω

SD: Black burst (NTSC: 0.286 Vp-p, 75 Ω/

PAL: 0.3 Vp-p, 75 Ω)

Output connectors

SLOT1

BNC type (4)

SDI OUT 1 to 4

12G-SDI: SMPTE ST2082, 0.8 Vp-p, 75 Ω,

11.880 Gbps/11.868 Gbps


5.940 Gbps/5.934 Gbps

3G-SDI: SMPTE ST424/425 Level-A/B, 0.8 Vp-p,

75 Ω, 2.970 Gbps/2.967 Gbps


1.485 Gbps/1.4835 Gbps

12G-SDI/6G-SDI/3G-SDI/HD-SDI selectable

SLOT2

BNC type (8)

SDI OUT 1 to 8


11.880 Gbps/11.868 Gbps


5.940 Gbps/5.934 Gbps

3G-SDI: SMPTE ST424/425 Level-A/B, 0.8 Vp-p,

75 Ω, 2.970 Gbps/2.967 Gbps


1.485 Gbps/1.4835 Gbps

12G-SDI/6G-SDI/3G-SDI/HD-SDI selectable

SLOT3

BNC type (2)

3G/HD SDI OUTPUT

3G-SDI: SMPTE ST424/425 Level-A, 0.8 Vp-p,

75 Ω, 2.970 Gbps/2.967 Gbps


1.485 Gbps/1.4835 Gbps

3G-SDI/HD-SDI selectable

SLOT4

BNC type (2)

HD SDI OUTPUT


1.485 Gbps/1.4835 Gbps

REFERENCE OUT

BNC type (1)

HD: SMPTE ST274, tri-level sync, 0.6 Vp-p, 75 Ω

SD: Composite sync, 0.3 Vp-p, 75 Ω

HD SYNC/SD SYNC selectable

Supplied accessories

Number plates (1 set)

Operation Guide (1)

OPERATION MANUAL (CD-ROM) (1)

Optional accessories

United States and Canada: Plug holder B (2-990-242-01)

Other areas: Plug holder C (3-613-640-01)

United States and Canada: Power cord set (1-551-812-XX)

Other areas: Power cord set (1-782-929-XX)

CCA-5-3 (3 m), CCA-5-10 (10 m) connection cables

SFP+ module

Service manual

Connectors for optical/electric composite cables:

LEMO® FXW.3K.93C.YSE (to the “CAMERA” connector on BPU)

ˎ

LEMO® EDW.3K.93C.YSE (to the “CCU” connector on BPU)

ˎ

LEMO® EDW.3K.93C.YSE (to the “BPU” connector on CA or HDC)

ˎ

LEMO® FXW.3K.93C.YSE (to the “CAMERA” connector on HDCU)

ˎ

Caution on the optical/electric composite cable:

For connection between the baseband processor unit and a camera system

adaptor, or between the baseband processor unit and a HD camera control unit,

be sure to use an optical/electric signal composite cable with the connectors

specified in this manual in order to comply with the limit for EMC regulations.

Sony BPU-4500A Operating Instructions

Sony BPU-4500A Manual

Sony BPU-4500A manual content summary: