Home » Sony Manuals » Adapters » Sony BPU-4500A » Manual Viewer

Sony BPU-4500A Operation Guide

Sony BPU-4500A Manual

View all Sony BPU-4500A manuals

Add to My Manuals
Save this manual to your list of manuals

Sony BPU-4500A manual content summary:

Sony BPU-4500A | Operation Guide - Page 1
BASEBAND PROCESSOR UNIT BPU4500A NETWORKED MEDIA INTERFACE KIT SKC-IP45AF ST 2110 INTERFACE KIT SKC-4001 OPERATION MANUAL [English] 1st Edition (Revised 2)
Sony BPU-4500A | Operation Guide - Page 2
Table of Contents Overview 3 System Configuration 4 Name and Function of Parts 10 Front Panel 10 Rear Panel 11 SKC-IP45AF Networked Media Interface Kit (Option 12 SKC-4001 ST 2110 Interface Kit (Option 13 Connection and Setup 14 4K System Connection 14 Extension Mode Connection 15 HD
Sony BPU-4500A | Operation Guide - Page 3
later. 2) Requires the SKC-4065 F65 Adaptor. 3) If using a HDCU1000-series unit, please contact your Sony representative. 4) To connect to SMPTE ST 2110 standard compatible devices using the SKC-4001 ST 2110 Interface , PMW-F55, F65, F65 Adaptor, CA4000, HDC4300, and HDC-P43 support this function. 3
Sony BPU-4500A | Operation Guide - Page 4
been discontinued. For advice on choosing devices, please contact your Sony representative. PMW-F55 connection example Connection example of PMW-F55 RCP-3000/1000 series Remote Control Panel LAN cable a) Use a lens supporter from the same manufacturer as the lens when mounting a studio camera lens
Sony BPU-4500A | Operation Guide - Page 5
Extension mode connection example Connection example without HDCU2000/2500 for operation as a camera extension unit. CA4000 Camera System Adaptor HDVF-EL75/L750/L770 DVF-L700 Viewfinder DVF-EL100 DVF-L350 Viewfinder PWS-100NM1 IP Live System Manager Station 4K Video Monitor 2K Video Monitor
Sony BPU-4500A | Operation Guide - Page 6
F65 connection example Connection example of operation using an F65 as a system camera. HDVF-EL75/L750/L770 DVF-L700 Viewfinder DVF-EL100 Viewfinder Lens F65 Digital Motion Picture Camera BP-8 Bridge Plate (ARRIFLEX) Tripod SKC-4065+CA4000 +SKC-PB40 Optical fiber cable USB flash drive CAC-6
Sony BPU-4500A | Operation Guide - Page 7
HDC4300 connection example Lens (for ENG/EFP) VCT-14 Tripod Adaptor Tripod HDVF-EL75/L750/L770 Viewfinder BKW-401 Viewfinder Rotation Bracket HDC4300 Color Camera HDVF-200 HDVF-EL20 HDVF-EL30 Viewfinder Optical fiber cable USB flash drive CAC-6 Return Video Selector Intercom Headset CAC-12
Sony BPU-4500A | Operation Guide - Page 8
HDC-P43 connection example AC-DN10 AC Adapter Lens (for ENG/EFP) HDC-P43 Multi Purpose Camera AC power supply 4K video monitor 2K video monitor BNC×4 or BNC × 1 BNC Single-mode fiber cable (ST connector, 1 pair) Optical fiber cable V shoe VCT-14 Tripod Attachment Tripod for portable camera
Sony BPU-4500A | Operation Guide - Page 9
IP transmission connection example Connection with devices that are SMPTE ST 2110 compliant is supported by installing an SKC-4001 ST 2110 Interface Kit in the BPU4500A. To use IP-related functions, connect with an HDCU3100/HDCU3500/HDCU5000, and use
Sony BPU-4500A | Operation Guide - Page 10
Name and Function of Parts Front Panel POWER OPTICAL CONDITION CAM BPU CCU NETWORK 123 MENU DISP CANCEL MENU ENTER REF IN UNLOCK RCP/MSU COM ERROR FAN STOP MENU LOCK OFF ON SW USB connector (for service personnel) a Red tally light Turns on when a red tally signal is received. When the
Sony BPU-4500A | Operation Guide - Page 11
level is low. One red indicator (left): Receive signal level is extremely low. j Assignable buttons You can assign functions to these buttons from the BPU menu. k Menu lock switch Locks the menu control block on the front panel. Rear Panel REMOTE REFERENCE IN OUT SDI1 SDI2 SLOT4 HD SDI OUT
Sony BPU-4500A | Operation Guide - Page 12
training. The BPU4500A can support 2-system 4K or 1-system HD over IP output by installing the SKC-IP45AF in the BPU4500A. For details about installation, contact your Sony sales or service representative. The following diagram shows the rear panel of the BPU4500A with the SKC-IP45AF installed
Sony BPU-4500A | Operation Guide - Page 13
SKC-4001 ST 2110 Interface Kit (Option) Note For safety, only a qualified technician with service training should perform tasks inside the unit. Connection with devices that are SMPTE ST 2110 compliant is supported by installing an SKC-4001 in the BPU4500A. BPU4500A software version 3.02 or later
Sony BPU-4500A | Operation Guide - Page 14
from SLOT3, SLOT4, and the CCU. Note 12G/6G-SDI signal output is supported only from the following connectors. • SDI OUT 1 connector of SLOT1 • SDI DC OUT TRACKER AES/EBU LINE MIC +48V OFF REMOTE AUX BPU Prompter (analog) Optical fiber cable CA4000 SDI-MONI PROMPTER1 PROMPTER2/MONITOR
Sony BPU-4500A | Operation Guide - Page 15
using optical fiber cables. The system can be synchronized because using the external genlock function. Intercom systems and multi-camera operation systems are not supported. An external power supply or power supplied from the CCU connector of an HDCE-200 is also required for the camera, since power
Sony BPU-4500A | Operation Guide - Page 16
/EBU LINE MIC +48V OFF REMOTE AUX BPU Sync signal input Optical fiber cable Return video operation, refer to the SZC-2001/2001M/2001W User's Guide. The cut-out HD signal is output from SLOT1 6G-SDI signal output is supported only from the following connectors. • SDI OUT 1 connector of
Sony BPU-4500A | Operation Guide - Page 17
Connection example INTERCOM PUSH AUDIO IN PUSH DC IN RET CTRL DC OUT TRACKER AES/EBU LINE MIC +48V OFF REMOTE AUX BPU Prompter (analog) Hub CA4000 SDI-MONI PROMPTER1 PROMPTER2/MONITOR CNA-1 Camera Control Network Adaptor Optical fiber cable Mouse SDI Monitor/Prompter (digital) 3G
Sony BPU-4500A | Operation Guide - Page 18
No No No No No No No No Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes Yes 1) Interlaced output also supported in HD HFR 1080 format 2) Selectable only when the format is set to 720P by the camera control unit (such as the HDCU2000). A 1× frame rate
Sony BPU-4500A | Operation Guide - Page 19
Connection example (4× HD) Prompter (analog) INTERCOM PUSH AUDIO IN PUSH DC IN PROMPTER1 PROMPTER2/MONITOR BPU Optical fiber cable RET CTRL DC OUT TRACKER AES/EBU LINE MIC +48V OFF REMOTE AUX CA4000 SDI-MONI SDI Monitor/Prompter (digital) 3G SDI/
Sony BPU-4500A | Operation Guide - Page 20
Prompter (analog) INTERCOM PUSH AUDIO IN PUSH DC IN RET CTRL DC OUT TRACKER AES/EBU LINE MIC +48V OFF REMOTE AUX PROMPTER1 PROMPTER2/MONITOR BPU Optical fiber cable 3G SDI/HD SDI Monitor LINK-1 LINK-2 LINK-3 LINK-4 CA4000 SDI-MONI SDI Monitor/Prompter (digital) 3G/HD SDI OUT REMOTE
Sony BPU-4500A | Operation Guide - Page 21
HDR Video System When a 4K format camera system is selected, the dynamic range of the camera can be enhanced to produce HDR video output from SLOT1 and SLOT2 by setting HDR MODE to Live HDR or CINEMA. Set the HDR Look at the same time. SLOT1 and SLOT2 can be configured separately, and can output HDR
Sony BPU-4500A | Operation Guide - Page 22
Settings Device Setting Menu/Page BPU4500A Transfer to HDR mode CONFIGURATION/ CONFIGURATION/ Item HDR MODE HDR LOOK SLOT1, OETF SLOT2 Set value LIVE HDR (Live HDR shooting, SR Live setting) CINEMA (HDR output for recording) Live Mild Natural (Enabled only when
Sony BPU-4500A | Operation Guide - Page 23
Operation mode 4K 4K HFR HD HD HFR Frame rate 23.98 59.94 (2×) 50 (2×) 59.94 50 29.97 25 24 23.98 59.94 (8×) 50 (8×) 59.94 (6×) 50 (6×) 59.94 (4×) 50 (4×) 59.94 (3×) 50 (3×) 59.94 (2×) 50 (2×) Slot1/Slot2 Output format 4K/23.98P 1) 3) 4K/23.98PsF 1) 3) 4K/23.98P 1) 3) 4K/23.98PsF 1) 3) 4K/23.98P
Sony BPU-4500A | Operation Guide - Page 24
CCU is 720P. 3) A Slot1/Slot2 output format of "4K" refers to 4096×2160 or 3840×2160. Notes • For 4K, the following IP output formats are supported (when SKC-IP45AF is installed). - SLOT1, SLOT2: 3840×2160 59.94P, 3840×2160 50P, 3840×2160 119.88P, 3840×2160 100P - SLOT3, SLOT4: 1920×1080
Sony BPU-4500A | Operation Guide - Page 25
Table 2: Relationship between output interface and BNC connector/NMI-LAN connector assignment The format of the signals output from the NMI-LAN connectors is the same as that for the SDI connectors. MAIN Output 4K / HD HFR / HD CUTOUT SLOT1 Operation Output mode format SDI OUT 1 SDI OUT 2 SDI
Sony BPU-4500A | Operation Guide - Page 26
Paint Functions in HDR MODE and BT.2020 COLOR MODE Some paint functions are disabled, depending on the HDR MODE and BT.2020 COLOR MODE settings on the BPU4500A. Disabled items can still be adjusted from the PAINT menu on the camera or RCP/MSU, but the settings are not applied to the HDR video that
Sony BPU-4500A | Operation Guide - Page 27
Paint function Skin Detail Saturation Matrix V Mod Saw Low Key Saturation White Clip Knee Saturation Auto Iris Gamma Table Noise Suppression Flicker Reduction Black Shading White Shading ON/OFF Gate ON/OFF Zoom Link ON/OFF Natural Skin DTL ON/OFF Level Phase Width Saturation Y Limit ON/OFF
Sony BPU-4500A | Operation Guide - Page 28
Paint function Black Set OHB Matrix ATW ALAC Black Set ON/OFF User Matrix R-G/G-B/B-R/R-B/G-R/B-G Multi Matrix Phase Multi Matrix Hue/Saturation ON/OFF Speed ON/OFF OFF Yes Yes Yes Yes HDR MODE setting LIVE HDR (HDR output) Yes Yes Yes Yes Yes Yes Yes Yes CINEMA (HDR output) No No No No Paint
Sony BPU-4500A | Operation Guide - Page 29
Paint function Skin Detail Saturation Matrix V Mod Saw Low Key Saturation White Clip Knee Saturation Auto Iris Gamma Table Noise Suppression Flicker Reduction Black Shading White Shading Black Set ON/OFF Gate ON/OFF Zoom Link ON/OFF Natural Skin DTL ON/OFF Level Phase Width Saturation Y Limit ON/
Sony BPU-4500A | Operation Guide - Page 30
Specify the network to send trap notifications. 0.0.0.0 to 255.255.255.255 Specify the trap destination. SNMP walk/get from the specified trap destination is supported. 162 V2C Fixed value TRAP Fixed value 30
Sony BPU-4500A | Operation Guide - Page 31
:HDC4300 OPT LV: C C CAM ssxxxxxxb BPU ssxxxxxxb CCU ssxxxxxxb ssxxxxxxb c c CAM T BPU: Signal level on the BPU connector of CA unit. CAM t BPU: Signal level on the CA connector of BPU unit. BPU T CCU: Signal level on the CCU connector of BPU unit. BPU t CCU: Signal level on the CAMERA
Sony BPU-4500A | Operation Guide - Page 32
Flashing ?C03 TOP SLOT1: C 3840x2160 3G(Lv-A) 2SI OETF: S-Log3 LOOK: --COLOR: BT2020 SLOT2: C 3840x2160 3G(Lv-A) 2SI OETF: S-Log3 LOOK: --COLOR: BT2020 SLOT3: C 1920x1080 3G(Lv-A) EC OETF: SDR COLOR: BT.709 SLOT4: M 1920x1080 HD-SDI EC OETF: SDR COLOR: BT.709 HD CUTOUT:(OFF) 2
Sony BPU-4500A | Operation Guide - Page 33
KEY (C10) HD CUTOUT (C11) HFR PAINT OFFSET SR Live METADATA(OUTPUT) (C13) ASSIGNABLE SWITCH HD DOWNCONV FILTER CHARACTER LEVEL 2× MODE(HD) CLEAR BPU SETTINGS RETURN VF CHANNEL MARKER HDR NORMAL SPEED OUT HDR LOOK SELECTION READ(USBtCAM) INSTALLED OPTION HD CUTOUT MODE CUTOUT CH CENTER H CENTER
Sony BPU-4500A | Operation Guide - Page 34
NETWORK menu IP ADDRESS SETTINGS (N01) CNS SETTINGS a) (N02) NETWORKED MEDIA INTERFACE b) (N03) IP LIVE b) (N04) IP ADDRESS 2 c) (N03) NETWORK GENLOCK c) (N04) PTP STATUS c) (N05) IP LIVE c) (N06) IP ADDRESS SUBNET MASK DEFAULT GATEWAY SET MAC ADDRESS CNS MODE SET NETWORK INTERFACE DHCP IP ADDRESS
Sony BPU-4500A | Operation Guide - Page 35
MULTICAST ADDRESS 7 c) (N13) MULTICAST ADDRESS 8 c) (N14) PING c) (N15) NETWORK c) (N16) IP STREAM c) (N17) MULTICAST ADDRESS META OUT MAIN HDHFR1 HDHFR2 HDHFR3 HDHFR4 HDHFR5 HDHFR6 HDHFR7 HDHFR8 MULTICAST ADDRESS META OUT SUB HDHFR1 HDHFR2 HDHFR3 HDHFR4 HDHFR5 HDHFR6 HDHFR7 HDHFR8 PORT IP ADDRESS
Sony BPU-4500A | Operation Guide - Page 36
DIAGNOSIS menu OPTICAL LEVEL (D01) BOARD STATUS (D02) CONNECTION STATUS (D03) ROM VERSION (D04) ROM VERSION 2 (D05) SERIAL NO. (D06) IP ADDRESS (D07) LAN STATUS (D08) CNS STATUS (D09) 12G/6G-SDI STATUS BOARD STATUS (SKC-4001) b) (D11) OPTICAL LEVEL CABLE LENGTH SY DVP TX DPR1 DPR2 NET a) CHU
Sony BPU-4500A | Operation Guide - Page 37
the ENTER position. CONFIGURATION menu Page name Page No. C01 Item BPU BARS BARS TYPE SDR HDR MOVING SYMBOL TYPE SIZE 2SI DIAMOND MARKER
Sony BPU-4500A | Operation Guide - Page 38
Page name Page No. C02 Item Set value Description HDR MODE OFF, LIVE HDR, CINEMA OFF: Normal SDR shooting mode. LIVE HDR: Enhances the video dynamic range on the camera, and outputs adjusted HDR video. CINEMA: Enhances the dynamic range on the camera, and outputs video for
Sony BPU-4500A | Operation Guide - Page 39
Page name Page No. C03 Item SLOT1 OETF LOOK COLOR Set value 3840×2160, 4096×2160, 1920×1080, 1280×720 HD-SDI, 3G(Lv-B), 3G(Lv-A), 6G, 12G 59i, 59P, 50i, 50P (8×), (6×), (4×), (3×), (2×) SQD, 2SI SDR, S-Log2, S-Log3, HLG Live, Mild, Natural BT.709, BT.2020 Description SLOT1 output
Sony BPU-4500A | Operation Guide - Page 40
Page name Page No. C03 Item SLOT2 OETF LOOK COLOR SLOT3 OETF COLOR Set value 3840×2160, 4096×2160, 1920×1080, 1280×720 HD-SDI, 3G(Lv-B), 3G(Lv-A), 6G, 12G 59i, 59P, 50i, 50P (8×), (6×), (4×), (3×), (2×) SQD, 2SI SDR, S-Log2, S-Log3, HLG Live, Mild, Natural BT.709, BT.2020 C, M
Sony BPU-4500A | Operation Guide - Page 41
Page name Page No. C03 C04 C05 C06 Item Set value Description SLOT4 SLOT4 output format settings 1920×1080, 1280×720 SLOT4 output video resolution setting (display only) 59i, 50i SLOT4 output frequency and scanning method setting in HFR mode (
Sony BPU-4500A | Operation Guide - Page 42
OFF, BPU BARS HD DOWNCONV FILTER 1 to 4, 1(V:0.3), 1(V:0.6) CHARACTER LEVEL 1 to 5 2× MODE (HD) 0 (SRMASTER), 1 (EVS) CLEAR BPU SETTINGS 1 (EVS): Compatible with servers manufactured by EVS. SR-R1000/PWS-4400/PWS-4500 support both the 0 and 1 settings. Displayed only when the format is 4K HFR
Sony BPU-4500A | Operation Guide - Page 43
cut out as-is from 4K image. ZOOM&PERSPECTIVE: When HD image is cut out from 4K image, distortion is corrected. Zoom in/out is supported. Specify the cut-out frame to control. Center position of cut-out frame (H) Center position of cut-out frame (V) Zoom factor Camera tilt angle Camera
Sony BPU-4500A | Operation Guide - Page 44
the selected network interface. Sets whether to set the LSM IP address using DHCP or to set it manually. ON: Sets the LSM IP address using DHCP. OFF: Sets the LSM IP address manually. Set to OFF (fixed) when DHCP is set to OFF on the page. Sets the
Sony BPU-4500A | Operation Guide - Page 45
setting of the IP switch to be connected. Selects the port of the SKC-4001 for setting NETWORK GENLOCK. Displays the supported protocol. Only the ST2059-2 profile is supported. Sets the domain number. Note Set to the domain number of the master device to be connected. MULTICAST MODE: Multicast reply
Sony BPU-4500A | Operation Guide - Page 46
1> MULTICAST N07 ADDRESS (When the SKC-4001 is installed) VIDEO OUT MAIN HD1 HD2 HD3 SUB HD1 HD2 HD3 DISABLE, ENABLE ON, OFF AUTO, MANUAL 224.0.0.1 to 239.255.255.255, 0.0.0.0 224.0.0.1 to 239.255.255.255, 0.0.0.0 Description Displays the port on which PTP is running, and the status
Sony BPU-4500A | Operation Guide - Page 47
ADDRESS 5> MULTICAST N11 ADDRESS (When the SKC-4001 is installed) META OUT MAIN HD1 HD2 HD3 SUB HD1 HD2 HD3 Set value Description AUTO, MANUAL 224.0.0.1 to 239.255.255.255, 0.0.0.0 Displays the mode of the multicast address setting of the IP stream. Settings for the IP AUDIO OUT
Sony BPU-4500A | Operation Guide - Page 48
TRANSMITTED RECEIVED PACKET LOSS ROUND-TRIP MIN AVE MAX Set value AUTO, MANUAL 224.0.0.1 to 239.255.255.255, 0.0.0.0 224.0.0.1 to 239.255.255.255, 0.0.0.0 AUTO, MANUAL 224.0.0.1 to 239.255.255.255, 0.0.0.0 AUTO, MANUAL 224.0.0.1 to 239.255.255.255, 0.0.0.0 LAN-COM, LAN1, LAN2 0.0.0.0 to 255
Sony BPU-4500A | Operation Guide - Page 49
Page name Page No. N16 (When the SKC-4001 is installed) Item LAN 1 2 3 4 SPD 1 2 3 4 FEC 1 2 3 4 LSM 1 2 PTP 1 2 N17 (When the SKC-4001 is installed) TX VIDEO HD 4K HD HFR AUDIO META HD 4K HD HFR Set value Description LINK DOWN, LINK UP LINK DOWN, LINK UP LINK
Sony BPU-4500A | Operation Guide - Page 50
Page name Page No. N18 (When the SKC-4001 is installed) Item AUDIO OUT FORMAT CH ORDER DIAGNOSIS menu Page name Page No. D01 Item OPTICAL LEVEL CABLE LENGTH D02 SY DVP TX DPR1 DPR2 NET a) CHU D03 DOCKING Set value L24/48kHz
Sony BPU-4500A | Operation Guide - Page 51
Page name Page No. D04 D05 D06 D07 D08 D09 D10 b) (D11) Item Display CAMERA APP Version number, date, device name OS OS version UPDATER Version of software updater
Sony BPU-4500A | Operation Guide - Page 52
details on parts replacement, contact your Sony representative. The life expectancy of the BPU camera head setting ON BPU does not match the connected camera head. PLEASE UPDATE CSA SOFTWARE The BPU and CSA software versions do not match. PLEASE CONFIRM BPU MODE/CHU VERSION The BPU
Sony BPU-4500A | Operation Guide - Page 53
/SD SYNC selectable Supplied accessories Number plates (1 set) Operation Guide (1) Operation Manual (CD-ROM) (1) Optional accessories United States and Canada: and CCA-5-10 (10 m) connection cables SFP+ module Service manual Related equipment PMW-F55 Solid-state Memory Camcorder F65
Sony BPU-4500A | Operation Guide - Page 54
For information about the supported SFP28 transceiver modules (e.g. OTM-25GSR1), contact your Sony sales or service representative. Supplied accessories Flat Edge saddle (2) Cord clamp (1) SFP cover (4) Operating Instructions (1) Related equipment OTM-25GSR1 SFP28 transceiver module Design
Sony BPU-4500A | Operation Guide - Page 55
BPU4500A (SY) 4-739-700-13 (2) Sony Corporation © 2018