Sony BPU-4800 Operating Instructions

Sony BPU-4800 Manual

Get Sony BPU-4800 PDF manuals and user guides View all Sony BPU-4800 manuals
Add to My Manuals
Save this manual to your list of manuals

Sony BPU-4800 manual content summary:

  • Sony BPU-4800 | Operating Instructions - Page 1
    4-599-596-15 (1) Baseband Processor Unit Operating Instructions Before operating the unit, please read this manual thoroughly and retain it for future reference. BPU4800 © 2016 Sony Corporation
  • Sony BPU-4800 | Operating Instructions - Page 2
    Status Display 16 Displaying the Status Screen 16 Status Display Screen 16 BPU Menu Settings 16 Changing Settings using the Menu 16 Menu Tree 18 40 File Operations via FTP 43 Appendix 47 Precautions 47 Troubleshooting 47 Salvaging Memory when Recording Ends Abnormally 47 Error Messages
  • Sony BPU-4800 | Operating Instructions - Page 3
    from a camera. • When the 4K HFR option1) is installed, recording 4K (3840×2160) at 8×/4× speed is supported. • When the HD HFR option2) is installed, recording HD (1920×1080) at 16×/8× speed is supported. • When the option memory board3) is installed, recording/playback of up to four hours of 4K at
  • Sony BPU-4800 | Operating Instructions - Page 4
    Color Camera NMI STATUS SW 1 12 LIVE REPLAY POWER SYSTEM ACCESS SHARE PLAY REF IN UNLOCK NETWORK COM ERROR FAN STOP OPTICAL CONDITION CAM BPU CCU MENU LOCK OFF ON MENU DISP CANCEL MENU ENTER Optical fiber cable BPU4800 10GbE HDCU2000 CCA-5 PWS-110MG1 4K/HD monitor Live 4K/HD
  • Sony BPU-4800 | Operating Instructions - Page 5
    Color Camera NMI STATUS SW 1 12 LIVE REPLAY POWER SYSTEM ACCESS SHARE PLAY REF IN UNLOCK NETWORK COM ERROR FAN STOP OPTICAL CONDITION CAM BPU CCU MENU LOCK OFF ON MENU DISP CANCEL MENU ENTER NMI-LAN BPU4800 NXL-FR318a) Network switch CCA-5 Sync signal/ return video input RCP
  • Sony BPU-4800 | Operating Instructions - Page 6
    LIVE REPLAY POWER SYSTEM ACCESS SHARE PLAY REF IN UNLOCK NETWORK COM ERROR FAN STOP OPTICAL CONDITION CAM BPU CCU MENU LOCK OFF ON MENU DISP CANCEL MENU ENTER USB connector (for service personnel) a Red tally light Turns on when a red tally signal is received. When the CALL button on
  • Sony BPU-4800 | Operating Instructions - Page 7
    network switch to devices that support Share Play for sharing content. c GPIO (25-pin) connector Parallel I/O connector. For details, refer to the Maintenance Manual or Interface Manual. d TIME CODE IN that might have excessive voltage to these ports. Follow the instructions for these ports. 7
  • Sony BPU-4800 | Operating Instructions - Page 8
    format for channels 1 to 8. h MAINTENANCE connector For use by service personnel. Not used for normal operation. i NETWORK 3 connector The supported. CAUTION For safety, do not connect the connector for peripheral device wiring that might have excessive voltage to this port. Follow the instructions
  • Sony BPU-4800 | Operating Instructions - Page 9
    They can also output signals with superimposed text characters and markers. w 3G/HD SDI OUTPUT connector (SLOT2 LIVE) (BNC type) Outputs video signals from the video camera as 3G-SDI signals or HD-SDI signals. The same signal is output from each connector grouped in pairs. x AC power supply unit
  • Sony BPU-4800 | Operating Instructions - Page 10
    , and the CCU. Slow-speed playback and clip/playlist management are supported using PWA-PRC1 Production Control Software and a PWSK-4403 USB Control SDI1 SDI2 Monitor LAN1 LAN LAN2 12 34 5 Mouse PWS-110PR1 BPU Network switch NMI Network SLOT2 REPLAY SLOT2 SDI OUT1 LIVE SDI OUT1
  • Sony BPU-4800 | Operating Instructions - Page 11
    synchronized because using the external genlock function. Intercom systems and multi-camera operation systems are not supported. An external power supply or power supplied from the CCU connector of an HDCE-200 is "Relationship between Operation Mode and Output Slots" (page 12). Switcher BPU 11
  • Sony BPU-4800 | Operating Instructions - Page 12
    Settings Device BPU4800 HDC4800 Setting Image format settings Video output connector settings Prompter output connector settings Menu/Page Item CONFIGURATION/ SYSTEM FORMAT RESOLUTION FREQUENCY CONFIGURATION/ SLOT1 to SLOT3 Can also be set using the
  • Sony BPU-4800 | Operating Instructions - Page 13
    Live output QFHD 3840×2160 SDI Picture size Frame rate Output format NMI-LAN Picture size Frame rate Output format HD 1920×1080 SDI Picture size Frame rate Output format NMI-LAN Picture size Frame rate Output format HD Cutout SDI Picture size Frame rate Output format NMI-LAN Picture size Frame rate
  • Sony BPU-4800 | Operating Instructions - Page 14
    , 50i *2 3G-A 1.5G SLOT3 REPLAY 1920×1080 1280×720 59.94i, 50i 59.94p, 50p 1.5G *3 *1 SLOT1 NMI-LAN output supports 3G 2SI Level-A. *2 SLOT2 NMI-LAN output does not support 1280×720 picture size. *3 HD character monitor is not added to SLOT2 NMI-LAN output. About Recording Times The recording
  • Sony BPU-4800 | Operating Instructions - Page 15
    Picture size HD 1920×1080 Recording format Frame rate Recording rate (speed) 59.94p 50p 960fps (16×) 480fps (8×) 240fps (4×) 60fps (1×) 800fps (16×) 400fps (8×) 200fps (4×) 50fps (1×) Normal 1h 20m 2h 40m 5h 20m 18h 50m 1h 30m 3h 10m 6h 20m 22h 40m Recording time Number of SKC-MEM4 extension
  • Sony BPU-4800 | Operating Instructions - Page 16
    can be monitored using text characters superimposed on the output signal of the SLOT3 LIVE monitor. For details about checking and changing settings, see "BPU Menu Settings" (page 16). Displaying the Status Screen The menu screen is controlled using the knob and levers in the MENU control block on
  • Sony BPU-4800 | Operating Instructions - Page 17
    To change page 1 Check that the , cursor is pointing to the page number then push the control knob. The , cursor changes to a flashing ? (question mark). Flashing ?C02 TOP SYSTEM FORMAT RESOLUTION: 3840x2160 FREQUENCY : 59.94 CCU : 1920x1080 COLOR MODE : BT.709 HDR MODE
  • Sony BPU-4800 | Operating Instructions - Page 18
    TRANSMIT (C09) OTHERS (C10) OPTIONKEY (C11) HFR PAINT OFFSET (C12) NETWORKED MEDIA INTERFACE (C13) IP LIVE SYSTEM MANAGER (C14) 2SI DIAMOND MARKER BPU BARS BARS TYPE CCU SYSTEM FORMAT RESOLUTION FREQUENCY COLOR MODE HDR MODE SLOT1 SLOT2 SLOT3 SLOT1 SLOT2 SLOT3 HD CUTOUT REFERENCE GENLOCK a) STATUS
  • Sony BPU-4800 | Operating Instructions - Page 19
    CHECK FIELD, Y-RAMP, Y/C-RAMP, HD-CUSTOM2 Color bar type When connected to a CCU, it is set by the CCU and cannot be modified from the BPU menu. 2SI DIAMOND MARKER OFF, ON Sets diamond mark superposition on the color bar for 4K 2-sample interleave output. See "4K 2SI diamond marks" (page
  • Sony BPU-4800 | Operating Instructions - Page 20
    Page name Page No. C03 Item SLOT1 OETF COLOR SLOT2 C04 OETF COLOR SLOT3 (SDI output only) OETF COLOR SLOT1 C05 SLOT2 SLOT3 (SDI output only) HD CUTOUT REFERENCE GENLOCK STATUS FORMAT PHASE V PHASE H SYNC-OUT VIDEO-OUT VIDEO OUT PHASE H
  • Sony BPU-4800 | Operating Instructions - Page 21
    SWITCH OFF, BPU BARS HD DOWNCONV FILTER 1 to 4, 0.3, 0.6 CHARACTER LEVEL 1 to 5 CONTROL CSA MENU ENTER to execute CLEAR BPU SETTINGS ENTER to CCU that support high bit rate. HD-SDI: CCU that does not support high bit rate. CCUs with 1.5 Gbps optical transmission are not supported. Assignable
  • Sony BPU-4800 | Operating Instructions - Page 22
    Page name Page No. C13 C14 Item NETWORK INTERFACE DHCP IP ADDRESS SUBNET MASK DEFAULT GATEWAY MAC ADDRESS NETWORK INTERFACE CONNECTION DHCP LSM IP ADDRESS CONNECTION STATUS SLOT1 LIVE SLOT1 REPLAY SLOT2 Set value Meaning SLOT 1 LIVE NMI LAN1,
  • Sony BPU-4800 | Operating Instructions - Page 23
    DIAGNOSIS menu Page name Page No. D01 D02 D03 D04 D05 D06 D07 D08 D09 D10 Item Set value Meaning OPTICAL LEVEL Bar graph display Bar graph display of
  • Sony BPU-4800 | Operating Instructions - Page 24
    Displays the system frequency (25 Hz or 29.97 Hz) set in the BPU menu. Replay Port + XAVC Transcode Port Select one of the following methods menu. Note Changing the system frequency or other board settings in the BPU menu will disable the loop recording area settings. Reconfigure the settings on
  • Sony BPU-4800 | Operating Instructions - Page 25
    Manual. SNMP screen: Makes SNMP settings. For details about this screen, refer to the Maintenance Manual. boards and the network. The Home screen supports simple display mode and detail display mode. You Control] button function is provided for service administrators. A password is required to
  • Sony BPU-4800 | Operating Instructions - Page 26
    HFR (high frame rate) Data Record Port The following information is displayed. Simple display Detailed display a Recording format [FILE] displays the video format of the recording. b File name Displays the name of the file being recorded. "Next: FILE" is displayed before recording. c Time code
  • Sony BPU-4800 | Operating Instructions - Page 27
    c Time code display Displays time code data (TCR). In detail display mode, UBR, TM1, and TM2 are also displayed simultaneously. d [Setting] button Displays the [Port] screen (page 35) for the corresponding port to configure port settings. e Playback indicator Displays "B" during playback. The
  • Sony BPU-4800 | Operating Instructions - Page 28
    Status Screen Displays a list of errors and warnings that have occurred on the unit, and the power supply status. Click the button, turning it on, to update the display automatically. Error/Warning Status Displays a list of errors and warnings. Power Supply Status Displays the status of the AC
  • Sony BPU-4800 | Operating Instructions - Page 29
    mode during variable speed playback. • Field: Field playback • Frame: Frame playback Freeze PB Mode Specifies the freeze mode and freeze timing for manual freeze (freeze control using REMOTE 1/2 (9-pin) connectors and GPIO (25-pin) connector) and auto freeze. • Field 1: Freezes the 1st (odd) field
  • Sony BPU-4800 | Operating Instructions - Page 30
    Remote tab Makes settings related to remote control. Remote Protocol Selects the protocol used on the REMOTE 1/2 connectors. • VTR/DISK: SONY VTR/Disk protocol • VDCP: VDCP protocol • Odetics: Odetics protocol Remote File List Selects the information returned in response to a file information sense
  • Sony BPU-4800 | Operating Instructions - Page 31
    GPIO (25-pin) connector. A 32-byte setting can be specified for pin 13 to pin 24. For details about commands, refer to the Interface Manual. Network 1 (1GbE) Sets the IP address, subnet mask, and default gateway of the NETWORK 1 connector. Displays the MAC address of the NETWORK 1 connector. The
  • Sony BPU-4800 | Operating Instructions - Page 32
    Play. DHCP This setting is fixed to Off. Primary/Secondary Used to set the IP address, subnet mask, and default gateway used for Share Play manually. Displays the MAC address. Estimate Share Play Maximum Tx Number Selects the video format for Share Play from the matrix. 32
  • Sony BPU-4800 | Operating Instructions - Page 33
    Share Play Tx:Rx Setting Specify the number of Share Play output transmitters (Tx) and receivers (Rx) to guarantee the network storage bandwidth for the selected video format. Bank tab Makes settings for user banks of saving settings. Bank Recall Factory Setting Click the [Recall] button to return
  • Sony BPU-4800 | Operating Instructions - Page 34
    Power tab Used to reboot and shut down the unit. Log Out Click the [Log Out] button to log out from the web menu. Reboot Click the [Start] button to close all ports and reboot the unit. 34
  • Sony BPU-4800 | Operating Instructions - Page 35
    Port Screen Makes settings for each port of the unit. HFR (high frame rate) Data Record Port Port information Displays the operating status of the selected port. The display is the same as on the Home screen. Option Remote 9pin Selects whether to enable remote control from the device connected to
  • Sony BPU-4800 | Operating Instructions - Page 36
    Note This setting is valid only when [TCG Source] is set to "Internal-Preset" and the frame frequency is 29.97 Hz. Timer Select Selects the time data to display. • TC • UB • TM1 • TM2 Timer Set Displays the time counter. To change the counter, enter a value and click the [Set] button. Clicking the [
  • Sony BPU-4800 | Operating Instructions - Page 37
    Replay Port / HD Cut Out Port Port information Displays the operating status of the selected port. The display is the same as on the Home screen. Option Remote 9pin Selects whether to enable remote control from the device connected to the REMOTE 1/2 (9-pin) connectors. • Off • On Remote 25pin
  • Sony BPU-4800 | Operating Instructions - Page 38
    • File List Repeat Feed Play Mode Sets the playback speed of feed play. If the playback speed is controlled using the PWA-PRC1 application, this setting is ignored. • Off (1x) • On (4x) • On (8x) • On (16x) Forced Shuttle Mode Selects whether to forcibly switch to shuttle control when using the Jog/
  • Sony BPU-4800 | Operating Instructions - Page 39
    • CH05 - CH06 • CH07 - CH08 • CH01 - CH04 • CH05 - CH08 • CH01 - CH06 • CH01 - CH08 Video Y ADD Selects whether to set "Y add" forcibly to Off. • Auto • Off Audio Audio Output Select Selects the file track to output on each audio output channel. File Screen Displays a list of the files stored in the
  • Sony BPU-4800 | Operating Instructions - Page 40
    File List Displays the file list. To filter the files using options, specify the search criteria in [Select Condition] and click the [Load] button. To filter the currently displayed files using different search criteria, change the setting in [Select Condition] and click the [Select] button. Storage
  • Sony BPU-4800 | Operating Instructions - Page 41
    Storage Graph Displays a graph of the usage status of each recording area in internal memory. File System Information Last Formatted Date Displays the date the file system was last formatted. Last Renewal Date Displays the date the file system was last renewed. Setup tab Storage Information
  • Sony BPU-4800 | Operating Instructions - Page 42
    Loop tab Assigns the recording area for each input/output when using loop recording. The recording loops back to the start of the loop recording area when it reaches the end of the area, overwriting the file. If there is more than one file in the loop recording area, files are overwritten starting
  • Sony BPU-4800 | Operating Instructions - Page 43
    Note When a loop recording area is specified, all files in memory are deleted. Recover Storage Capacity If PWA-PRC1 operation creates subclips in the loop recording area and overwriting the loop recording area is inhibited, the overwrite setting of the loop recording area is retained even when
  • Sony BPU-4800 | Operating Instructions - Page 44
    (below) and extended commands (page 46). Notes • To execute an FTP command, the application software must be installed on the computer. • The supported commands may vary depending on the application software. • Only ASCII characters can be used in file names. Standard commands In the command syntax
  • Sony BPU-4800 | Operating Instructions - Page 45
    Syntax: RETR Example: RETR FILE00000010.mxf STOR Copies MXF files on the computer to the current directory. Syntax: STOR Example: STOR FILE00000010.mxf RNFR RNTO Renames a file. Specify the current file name using the RNFR command and specify the new
  • Sony BPU-4800 | Operating Instructions - Page 46
    Syntax: CWD Switches to the following directory, depending on the presence or otherwise of the directory specified in . • When a directory is specified: The specified directory • Nothing specified: The root directory Example: CWD InternalStorage1 CDUP Changes the
  • Sony BPU-4800 | Operating Instructions - Page 47
    Appendix Troubleshooting Precautions If the unit is suddenly taken from a cold to a warm location, or if ambient temperature suddenly rises, moisture may form on the outer surface
  • Sony BPU-4800 | Operating Instructions - Page 48
    BPU camera head setting does not match the connected camera head. The BPU TROUBLE, etc. 260100 260200 960100 B3xx00 B3xxpp B3xxii B33Ess B80100 POWER SUPPLY A UNIT TROUBLE POWER SUPPLY B UNIT TROUBLE stage. For details, refer to the Maintenance Manual. An error occurred in communications with the
  • Sony BPU-4800 | Operating Instructions - Page 49
    Out Port Warning Messages When one of the problems described below is detected by the unit, be formatted. Follow the on-screen instructions to format memory. Recording was aborted error location. For details, refer to the Maintenance Manual. After a warning message appears, resolve the cause of
  • Sony BPU-4800 | Operating Instructions - Page 50
    Code 1) 1C01pp 210101 220201 220400 300100 300200 310100 310200 470100 740200 Indication 2) PORT x NO A7/A8 INPUT (P-x NO A7/A8) SLOT MX REC INHIBIT (REC INHBIT) SLOT MX FS LOCKED (FS LOCKED) UNFORMATTED MEMORY BOARD DETECTION POWER SUPPLY A INVALID INPUT VOLTAGE POWER SUPPLY B INVALID INPUT
  • Sony BPU-4800 | Operating Instructions - Page 51
    bad memory cells is becoming smaller. Although there is currently no problem, it is recommended that you replace with new memory. The swap When finished, click the [OK] button. For details, refer to the Maintenance Manual. Displaying the Error Log You can check up to 99 detected error messages and
  • Sony BPU-4800 | Operating Instructions - Page 52
    /EBU format, unbalanced Supplied accessories Number plates (1 set) Before Using this Unit (1) Operating Instructions (CD-ROM) (1) Cable, RJ45-DSUB Part No. 1-848-424-12 (SONY) (1) Memory Array OTM-10GSR1 SFP+ Transceiver Module Maintenance manual Related equipment HDC4800 Color Camera 52
  • Sony BPU-4800 | Operating Instructions - Page 53
    . • SONY WILL NOT BE LIABLE FOR THE TERMINATION OR DISCONTINUATION OF ANY SERVICES RELATED TO THIS UNIT THAT MAY RESULT DUE TO CIRCUMSTANCES OF ANY KIND. UNAVOIDABLE DATA LEAKS RESULTING FROM TRANSMISSION SPECIFICATIONS, OR SECURITY PROBLEMS OF ANY KIND. Depending on the operating environment,
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
4-599-596-
15
(1)
Baseband Processor
Unit
Operating Instructions
Before operating the unit, please read this manual thoroughly
and retain it for future reference.
BPU4800
© 2016 Sony Corporation