Sony CCD TRV68 Operating Instructions - Page 59

Troubleshooting Types of trouble and their solutions In the recording and playback modes Symptom The power does not turn on. The end search function does not work. The battery pack is quickly discharged. The remaining battery time indicator does not indicate the correct time. The power goes off although the remaining battery time indicator indicates that the battery pack has enough power to operate. Cause and/or Corrective Actions • The battery pack is not installed, or is dead or nearly dead. c Install a charged battery pack. (p. 11, 12) • The AC power adaptor is not connected to a wall outlet. c Connect the AC power adaptor to a wall outlet. (p. 16) •The tape was ejected after recording. •You have not recorded on the new cassette yet. • The operating temperature is too low. • The battery pack is not fully charged. c Charge the battery pack fully again. (p. 11, 12) • The battery pack is completely dead, and cannot be recharged. c Replace with a new battery pack. (p. 11) • You have used the battery pack in an extremely hot or cold environment for a long time. • The battery pack is completely dead, and cannot be recharged. c Replace with a new battery pack. (p. 11) • The battery is not fully charged. c Charge the battery pack fully again. (p. 11, 12) • A deviation has occured in the remaining battery time. c Charge the battery pack fully again. (p. 11, 12) • A deviation has occured in the remaining battery time. c Charge the battery pack fully again. (p. 11, 12) The cassette cannot be removed from the holder. The % and Z indicators flash and no functions except for cassette ejection work. • The power source is disconnected. c Connect it firmly. (p. 12, 16) • The battery is dead. c Use a charged battery pack. (p. 11, 12) • Moisture condensation has occurred. c Remove the cassette and leave your camcorder for at least 1 hour to acclimatize. (p. 67) (Continued on the following page) 59