Sony CDX-CA700X Operating Instructions (primary manual) - Page 17
Adjusting the sound characteristics, Quickly attenuating the sound - no sound
View all Sony CDX-CA700X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Changing the operative direction The operative direction of controls is factory-set as shown below. To increase To decrease If you need to mount the rotary commander on the right hand side of the steering column, you can reverse the operative direction. Adjusting the sound characteristics You can adjust the bass, treble, balance and fader. 1 Select the item you want to adjust by pressing (SOUND) repeatedly. Each time you press (SOUND), the item changes as follows: BAS (bass) t TRE (treble) t BAL (left-right) t FAD (front-rear) 2 Adjust the selected item by pressing either side of (SEEK). When adjusting with the rotary commander, press (SOUND) and rotate the VOL control. Note Adjust within 3 seconds after selecting the item. Press (SOUND) for 2 seconds while pushing the VOL control. Tip You can also change the operative direction of these controls with the unit (page 18). Quickly attenuating the sound (With the rotary commander or the card remote commander) Press (ATT) on the rotary commander or card remote commander. After "ATT-ON" momentarily appears, "ATT" appears in the display. To restore the previous volume level, press (ATT) again. Tip When the interface cable of a car telephone is connected to the ATT lead, the unit decreases the volume automatically when a telephone call comes in (Telephone ATT function). 17