Sony CDX-CA810X Installation/Connections Instructions

BUS CONTROL IN

BUS AUDIO IN

Source selector

*

Sélecteur de source

*

XA-C30

*

not supplied

non fourni

Sony Corporation

© 2003

Printed in Thailand

3-247-570-

11

(1)

Cautions

• This unit is designed for negative ground 12 V DC

operation only.

• Do not get the wires under a screw, or caught in

moving parts (e.g. seat railing).

• Before making connections, turn the car ignition

off to avoid short circuits.

• Connect the

yellow

and

red

power input leads

only after all other leads have been connected.

•

Run all ground wires to a common ground

point.

• Be sure to insulate any loose unconnected wires

with electrical tape for safety.

• The use of optical instruments with this product

will increase eye hazard.

Notes on the power supply cord (yellow)

• When connecting this unit in combination with

other stereo components, the connected car

circuit’s rating must be higher than the sum of

each component’s fuse.

• When no car circuits are rated high enough,

connect the unit directly to the battery.

Parts Iist (

1

)

• The numbers in the list are keyed to those in the

instructions.

• The bracket

1

and the protection collar

3

are

attached to the unit before shipping. Before

mounting the unit, use the release keys

5

to

remove the bracket

1

and the protection collar

3

from the unit. For details, see “Removing the

protection collar and the bracket (

4

)” on the

reverse side of the sheet.

•

Keep the release keys

5

for future use as they

are also necessary if you remove the unit from

your car.

Caution

Handle the bracket

1

carefully to avoid injuring

your fingers.

Note

Before installing, make sure that the catches on both

sides of the bracket

1

are bent inwards 2 mm (

3

/

32

in). If

the catches are straight or bent outwards, the unit

will not be installed securely and may spring out.

Installation/Connections

Installation/Connexions

FM

/

AM

Compact Disc

Player

Connection example (

2

)

Notes

(

2

-A)

• Be sure to connect the ground cord before

connecting the amplifier.

• If you connect an optional power amplifier and do

not use the built-in amplifier, the beep sound will

be deactivated.

Tip

(

2

-B-

)

For connecting two or more CD/MD changers, the

source selector XA-C30 (optional) is necessary.

Connection diagram (

3

)

1

To a metal surface of the car

First connect the black ground lead, then connect

the yellow and red power input leads.

2

To the power antenna control lead or power

supply lead of antenna booster amplifier

Notes

• It is not necessary to connect this lead if there is

no power antenna or antenna booster, or with

a manually-operated telescopic antenna.

• When your car has a built-in FM/AM antenna in

the rear/side glass, see “Notes on the control

and power supply leads.”

3

To AMP REMOTE IN of an optional power

amplifier

This connection is only for amplifiers. Connecting

any other system may damage the unit.

4

To the interface cable of a car telephone

5

To the +12 V power terminal which is

energized in the accessory position of the

ignition key switch

Notes

• If there is no accessory position, connect to the

+12 V power (battery) terminal which is

energized at all times.

Be sure to connect the black ground lead to a

metal surface of the car first.

• When your car has a built-in FM/AM antenna in

the rear/side glass, see “Notes on the control

and power supply leads.”

6

To the +12 V power terminal which is

energized at all times

Be sure to connect the black ground lead to a

metal surface of the car first.

Notes on the control and power supply leads

• The power antenna control lead (blue) supplies +12

V DC when you turn on the tuner.

• When your car has built-in FM/AM antenna in the

rear/side glass, connect the power antenna control

lead (blue) or the accessory power input lead (red)

to the power terminal of the existing antenna

booster. For details, consult your dealer.

• A power antenna without relay box cannot be used

with this unit.

2

A

B

SUB OUT (MONO)

AUDIO OUT

REAR

BUS AUDIO IN

BUS CONTROL IN

1

4

5

Equipment used in illustrations (not supplied)

Appareils utilisés dans les illustrations (non fournis)

Rear speaker

Haut-parleur arrière

Front speaker

Haut-parleur avant

1

CD/MD changer

Changeur de CD/MD

Rotary commander RM-X4S

Satellite de commande RM-X4S

Power amplifier

Amplificateur de puissance

×

4

2

×

2

3

CDX-CA810X

Active subwoofer

Caisson de graves actif

1

AUDIO OUT

FRONT

Catch

Sony CDX-CA810X Installation/Connections Instructions

Sony CDX-CA810X - Fm/am Compact Disc Player Manual

Sony CDX-CA810X manual content summary: