Sony CDX-FW700 Installation/Connection Instructions

Sony CDX-FW700 - Fm/am Compact Disc Player Manual

Get Sony CDX-FW700 - Fm/am Compact Disc Player PDF manuals and user guides View all Sony CDX-FW700 manuals
Add to My Manuals
Save this manual to your list of manuals

Sony CDX-FW700 manual content summary:

  • Sony CDX-FW700 | Installation/Connection Instructions - Page 1
    Player Installation/Connections Instalación/Conexiones CDX-FW700 © 2004 Sony connecting this unit in combination with other stereo components, the connected car circuit's CD/MD changers, the source selector XA-C30 (optional) is necessary. Connection diagram (3) 1 To a metal surface of the car
  • Sony CDX-FW700 | Installation/Connection Instructions - Page 2
    ) *2 Be sure to match the color-coded cord for audio to the appropriate jacks from the unit. If you connect an optional CD/MD unit, you cannot use AUX IN terminal. *3 Auxiliary optional equipment such as portable DVD player (not supplied) *4 Supplied with the auxiliary equipment *5 Supplied with
  • Sony CDX-FW700 | Installation/Connection Instructions - Page 3
    correctly. Oriente la llave de liberación en la dirección correcta. c 2 Face the hook inwards. 5 El gancho debe encontrarse en la parte interior. central Bracket Soporte Bracket Soporte Existing parts supplied with your car Piezas existentes suministradas con su automóvil 2 max. size
  • Sony CDX-FW700 | Installation/Connection Instructions - Page 4
    -point pen, etc., after detaching the front panel. Mounting the unit in a Japanese car (6) You may not be able to install this unit in some makes of Japanese cars. In such a case, consult your Sony dealer. Note To prevent malfunction, install only with the supplied screws 2. Precauciones •Elija
  • 1
  • 2
  • 3
  • 4
© 2004 Sony Corporation
Printed in Korea
3-263-410-
21
(1)
Cautions
•This unit is designed for negative ground 12 V
DC operation only.
•Do not get the leads under a screw, or caught
in moving parts (e.g. seat railing).
•Before making connections, turn the car
ignition off to avoid short circuits.
•Connect the
yellow
and
red
power input leads
only after all other leads have been connected.
•
Run all ground leads to a common ground
point.
•Be sure to insulate any loose unconnected
leads with electrical tape for safety.
•The use of optical instruments with this
product will increase eye hazard.
Notes on the power supply lead (yellow)
•When connecting this unit in combination with
other stereo components, the connected car
circuit’s rating must be higher than the sum of
each component’s fuse.
•When no car circuits are rated high enough,
connect the unit directly to the battery.
Parts Iist (
1
)
•The numbers in the list are keyed to those in
the instructions.
•The bracket
1
and the protection collar
3
are
attached to the unit before shipping. Before
mounting the unit, use the release keys
5
to
remove the bracket
1
and the protection collar
3
from the unit. For details, see “Removing
the protection collar and the bracket (
4
)” on
the reverse side of the sheet.
•
Keep the release keys
5
for future use as
they are also necessary if you remove the
unit from your car.
Caution
Handle the bracket
1
carefully to avoid injuring
your fingers.
Note
Before installing, make sure that the catches on
both sides of the bracket
1
are bent inwards 2 mm
(
3
/
32
in). If the catches are straight or bent outwards,
the unit will not be installed securely and may spring
out.
Installation/Connections
Instalación/Conexiones
FM
/
AM
Compact Disc
Player
Connection example (
2
)
Notes
(
2
-A)
• Be sure to connect the ground lead before
connecting the amplifier.
• If you connect an optional power amplifier and do
not use the built-in amplifier, the beep sound will
be deactivated.
Tip
(
2
-B-
)
For connecting two or more CD/MD changers, the
source selector XA-C30 (optional) is necessary.
Connection diagram (
3
)
1
To a metal surface of the car
First connect the black ground lead, then
connect the yellow and red power input leads.
2
To the power antenna control lead or power
supply lead of antenna booster amplifier
Notes
• It is not necessary to connect this lead if there
is no power antenna or antenna booster, or
with a manually-operated telescopic antenna.
• When your car has a built-in FM/AM antenna in
the rear/side glass, see “Notes on the control
and power supply leads.”
3
To AMP REMOTE IN of an optional power
amplifier
This connection is only for amplifiers. Connecting
any other system may damage the unit.
4
To the interface cable of a car telephone
5
To a car’s illumination signal
Be sure to connect the black ground lead to a
metal surface of the car first.
6
To the +12 V power terminal which is energized
in the accessory position of the ignition key
switch
Notes
• If there is no accessory position, connect to the
+12 V power (battery) terminal which is
energized at all times.
Be sure to connect the black ground lead to a
metal surface of the car first.
• When your car has a built-in FM/AM antenna in
the rear/side glass, see “Notes on the control
and power supply leads.”
7
To the +12 V power terminal which is energized
at all times
Be sure to connect the black ground lead to a
metal surface of the car first.
1
3
2
Equipment used in illustrations (not supplied)
Equipo utilizado en las ilustraciones (no suministrado)
Rear speaker
Altavoz posterior
Front speaker
Altavoz frontal
1
Power amplifier
Amplificador de potencia
5
×
2
4
Active subwoofer
Altavoz potenciador de
graves activo
CDX-FW700
Catch
1
×
4
AUDIO OUT
FRONT
AUDIO OUT
REAR
SUB OUT (MONO)
BUS AUDIO IN
BUS CONTROL IN
BUS AUDIO IN
BUS CONTROL IN
Source selector
*
Selector de fuente
*
XA-C30
*
not supplied
no suministrado
2
A
B
CD/MD changer
Cambiador de CD/MD
Rotary commander RM-X4S
Mando rotatorio RM-X4S