Sony CDX-GT55UIW Operating Instructions - Page 19
Adjusting the listening position, DM+ Advanced, Using rear speakers as subwoofer - Rear Bass Enhancer
View all Sony CDX-GT55UIW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
The options for "SET SW POS" are indicated below. "NEAR" (A): Near "NORMAL" (B): Normal "FAR" (C): Far 1 During reception/playback, press the select button. 2 Rotate the control dial until "SET POSITION" appears, then press it. 3 Rotate the control dial to select from "FRONT L," "FRONT R," "FRONT" or "ALL," then press it. 4 Rotate the control dial until "SET SW POS" appears, then press it. If you select "FRONT L," "FRONT R," "FRONT" or "ALL" in step 3 above, you can set the subwoofer position. Rotate the control dial to select from "NEAR," "NORMAL" or "FAR," then press it. 5 Press (BACK). The display returns to normal reception/play mode. To cancel listening position, select "OFF" on step 3. Adjusting the listening position You can fine-tune the listening position setting. 1 During reception/playback, press the select button. 2 Rotate the control dial until "ADJ POSITION" appears, then press it. 3 Rotate the control dial to adjust the listening position, then press it. Adjustable range: "+3" - "CENTER" - "-3." 4 Press (BACK). The display returns to normal reception/play mode. DM+ Advanced DM+ Advanced improves digitally compressed sound by restoring high frequencies lost in the compression process. 1 During playback, press the select button. 2 Rotate the control dial until "DM+" appears, then press it. 3 Rotate the control dial to select "ON," then press it. 4 Press (BACK). The display returns to normal play mode. Tip The DM+ setting can be memorized for each source. Using rear speakers as subwoofer - Rear Bass Enhancer Rear Bass Enhancer enhances the bass sound by applying the low pass filter setting (page 20) to the rear speakers. This function allows the rear speakers to work as a subwoofer if one is not connected. 1 During reception/playback, press the select button. 2 Rotate the control dial until "RB ENH" appears, then press it. 3 Rotate the control dial to select from "1," "2" or "3," then press it. 4 Press (BACK). The display returns to normal reception/play mode. 19