Sony CDX-SW200 Primary User Manual - Page 13
Setting the equalizer EQ3 - xplod
View all Sony CDX-SW200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Setting the equalizer (EQ3) You can select an equalizer curve for 7 music types (XPLOD, VOCAL, CLUB, JAZZ, NAGE, ROCK, CUST, and OFF (equalizer OFF)). You can store a different equalizer setting for each source. Selecting the equalizer curve 1 Press (SOURCE) to select a source (Radio or CD). 2 Press (EQ3) repeatedly until the desired equalizer curve. Each time you press (EQ3), the item changes. Adjusting the equalizer curve You can store and adjust the equalizer settings for different tone ranges. 1 Press (SOURCE) to select a source (Radio or CD). 2 Press (EQ3) repeatedly to select the desired equalizer curve. 3 Adjusting the equalizer curve. 1 Press (SEL) repeatedly to select the desired tone range. Each time you press (SEL), the tone range changes. LOW t MID t HI (t BAL t FAD) 2 Press the volume +/- button repeatedly to adjust to the desired volume level. The volume level is adjustable by 1 dB steps from -10 dB to +10 dB. To cancel the equalizing effect, select "OFF." 3 Repeat step 1 and 2 to adjust the equalizer curve. To restore the factory-set equalizer curve, press (SEL) for 2 seconds. After 3 seconds, the display returns to normal play mode. Note When EQ3 is set to "OFF," you cannot adjust the equalizer curve settings. 13