Sony CFD-E90PS Operating Instructions (primary manual)

Sony CFD-E90PS - Cd Radio Cassette-corder Manual

Get Sony CFD-E90PS - Cd Radio Cassette-corder PDF manuals and user guides View all Sony CFD-E90PS manuals
Add to My Manuals
Save this manual to your list of manuals

Sony CFD-E90PS manual content summary:

  • Sony CFD-E90PS | Operating Instructions (primary manual) - Page 1
    3-263-561-11 (1) CD Radio Cassette-Corder Operating Instructions CFD-E90 © 2004 Sony Corporation
  • Sony CFD-E90PS | Operating Instructions (primary manual) - Page 2
    equipment. Owner's Record The model number is located on the bottom and the serial number is located in the battery compartment. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. CFD-E90 Serial No
  • Sony CFD-E90PS | Operating Instructions (primary manual) - Page 3
    a CD 4 Listening to the radio 6 Playing a tape 8 Recording on a tape 10 The CD Player Using power sources 23 Additional Information Precautions 25 Troubleshooting 26 Maintenance 29 Specifications 30 Index 31 About the demonstration mode If "HELLO" appears on the display, the player
  • Sony CFD-E90PS | Operating Instructions (primary manual) - Page 4
    2 3 4 Connect the supplied AC power cord (see page 23). Press ZPUSH OPEN/CLOSE down to open the CD compartment and place the CD on the CD compartment. With the label side up Close the lid of the CD compartment. Press u. Display The player turns on (direct power-on) and plays all the tracks once
  • Sony CFD-E90PS | Operating Instructions (primary manual) - Page 5
    after pause. go to the next track Turn the jog dial clockwise. (On the remote, press >.) go back to the previous track Turn the jog dial counterclockwise. (On the remote, press ..) remove the CD Press ZPUSH OPEN/CLOSE. turn on/off the player Press POWER. * The button has a tactile dot. 5
  • Sony CFD-E90PS | Operating Instructions (primary manual) - Page 6
    supplied AC power cord (see page 23). 1 Press RADIO•BAND•AUTO Display PRESET until the band you want appears in the display (direct power- on). 2 Hold down TUNE + or TUNE - until Indicates an FM stereo the frequency digits begin to change broadcast in the display. The player automatically
  • Sony CFD-E90PS | Operating Instructions (primary manual) - Page 7
    "Mono" appears in the display and the radio will play in monaural. To adjust the volume turn on/off the radio Press VOLUME +*, - (VOL +, - on the remote) POWER * VOLUME + has a tactile dot. To improve broadcast reception Reorient the antenna for FM. Reorient the player itself for AM. for FM for
  • Sony CFD-E90PS | Operating Instructions (primary manual) - Page 8
    Connect the supplied AC power cord (see page 23). 1 Press xZ to open the tape With the side you want compartment and insert a recorded to play facing you tape. Use TYPE I (normal) tape only. Close the compartment. 2 Press n. Display The player turns on (direct power-on) and starts playing
  • Sony CFD-E90PS | Operating Instructions (primary manual) - Page 9
    Basic Operations Use these buttons for additional operations POWER VOLUME +, - m, M xZ X To adjust the volume stop playback fast-forward or rewind the tape pause playback eject the cassette turn on/off the player Press VOLUME +*, - (VOL +, - on the remote) xZ m or M X Press the button again to
  • Sony CFD-E90PS | Operating Instructions (primary manual) - Page 10
    Connect the supplied AC power cord (see page 23). Press xZ to open the tape With the side you want to compartment and insert a blank tape. record on facing you Use TYPE I (normal) tape only. Select the program source you want to record. To record from the CD player, insert a CD (see page 4) and
  • Sony CFD-E90PS | Operating Instructions (primary manual) - Page 11
    in step 3, press pause recording turn on/off the player X Press the button again to resume recording. POWER MODE to select the position power as a power source. • To erase a recording, proceed as follows: 1 Insert the tape whose recording you want to erase. 2 Press FUNCTION on the remote
  • Sony CFD-E90PS | Operating Instructions (primary manual) - Page 12
    CD Player Using the display You can check information about the CD using the display. DISPLAY Locating a specific point in a track You can quickly find a specific point in a track while playing a CD hold down until you find the point. (On the remote, use > or .). a point while observing the
  • Sony CFD-E90PS | Operating Instructions (primary manual) - Page 13
    or program play modes (see page 14). Jog dial u x MODE To cancel Repeat Play Press MODE until "REP" disappears from the display. The CD Player 1 Press x. "Cd" appears in the display. 2 Proceed as follows: To repeat Do this a single track 1 Press MODE until "REP 1" appears. 2 Turn the jog dial
  • Sony CFD-E90PS | Operating Instructions (primary manual) - Page 14
    until "SHUF" appears in the display. 3 Press u to start shuffle play. To cancel Shuffle Play Press MODE until "SHUF" disappears from the display. 1 Press x. "Cd" appears in the display. 2 Press MODE until "PGM" appears in the display. 3 Turn the jog dial to select the track you want to program, and
  • Sony CFD-E90PS | Operating Instructions (primary manual) - Page 15
    . Then create a new program following the programing procedure. Tips • You can play the same program again, since the program is saved until you open the CD compartment. • You can record your own program. After you've created the program, insert a blank tape and press z to start
  • Sony CFD-E90PS | Operating Instructions (primary manual) - Page 16
    You can store radio stations into the player's memory. You can preset up to 30 radio stations, 20 for FM and 10 for AM in any order. RADIO BAND AUTO PRESET Jog dial ENTER If a station cannot be preset automatically You need to preset a station with a weak signal manually. 1 Press RADIO•BAND•AUTO
  • Sony CFD-E90PS | Operating Instructions (primary manual) - Page 17
    stations Once you've preset the stations, use the jog dial on the player or PRESET + , - on the remote to tune in to your favorite stations. RADIO BAND AUTO PRESET Jog dial The Radio 1 Press RADIO•BAND•AUTO PRESET to select the band. 2 Turn the jog dial to tune in the stored station. On the
  • Sony CFD-E90PS | Operating Instructions (primary manual) - Page 18
    The Audio Emphasis Selecting the audio emphasis (MEGA BASS) You can adjust the audio emphasis of the sound you are listening to. MEGA BASS Reinforcing the bass sound Press MEGA BASS. "MEGA BASS" appears in the display. To return to normal sound, press the button again. 18
  • Sony CFD-E90PS | Operating Instructions (primary manual) - Page 19
    . Tip The time display system: 12-hour system AM 12:00 = midnight PM 12:00 = noon The Timer Before you set the clock, connect the power source (see page 23). 1 Hold down CLOCK/SLEEP/TIMER until "CLOCK" appears in the display. The hour digit flashes. 2 Turn the jog dial to set
  • Sony CFD-E90PS | Operating Instructions (primary manual) - Page 20
    music source you want to play. To play Do this the radio Tune in a station. a CD Insert a CD. 2 Press CLOCK/SLEEP/TIMER until "TIMER" appears in the power goes off. At the preset time, the power will go on, and the music will play. Then the power will go off at the preset time, and the player
  • Sony CFD-E90PS | Operating Instructions (primary manual) - Page 21
    If you turn off the player before the preset time, timer playback will start at the preset time. In case of the radio, however, if you listen stop play Press POWER to turn off the power. Notes • When you press STANDBY in step 7 on page 20, make sure that n or z button of the tape player is not
  • Sony CFD-E90PS | Operating Instructions (primary manual) - Page 22
    set time, the player will not go off until the tape reaches the end. Tips • You can fall asleep and wake up to different music. Set the waking up timer first (see page 20), turn on the power, and then set the sleeping timer. However, you cannot store different radio stations. • You can
  • Sony CFD-E90PS | Operating Instructions (primary manual) - Page 23
    sources You can use the AC power or batteries as a power source. Setting Up 14 Battery compartment 2 to a wall outlet AC IN 1 Inserting the back-up batteries Insert the batteries as illustrated. Note Before you replace the batteries, be sure to take out the CD from the player. continued 23
  • Sony CFD-E90PS | Operating Instructions (primary manual) - Page 24
    of the supplied AC power cord to the AC IN socket located at the rear of the player, and the other end to the wall outlet. 3 Inserting batteries into the remote Notes • Before you replace the batteries, be sure to take out the CD from the player. • When you operate the player on the batteries, you
  • Sony CFD-E90PS | Operating Instructions (primary manual) - Page 25
    heart, square, star) cannot be played on this player. Attempting to do so may damage the player. Do not use such discs. On power sources • For AC operation, use the supplied AC power cord; do not use any other type. • The player is not disconnected from the AC power source (mains) as long as it is
  • Sony CFD-E90PS | Operating Instructions (primary manual) - Page 26
    among those discs, there are some that do not conform to the CD standard and may not be playable by this product. If you have any questions or problems concerning your player, please consult your 26 nearest Sony dealer. Troubleshooting General The power is not on. • Connect the AC power cord to the
  • Sony CFD-E90PS | Operating Instructions (primary manual) - Page 27
    out or noise may be heard when using poor quality CD-Rs/CDRWs or if there is a problem with the recording device or application software. You cannot open/close the lid of the CD compartment. • Place the player on a level surface and open/ close the lid. Radio The audio is weak or has poor quality
  • Sony CFD-E90PS | Operating Instructions (primary manual) - Page 28
    to strong light such as direct sunlight or fluorescent lamp light. • Move closer to the player when using the remote. After trying the above remedies, if you still have problems, unplug the AC power cord and remove all the batteries. After all the indications in the display disappear, plug the
  • Sony CFD-E90PS | Operating Instructions (primary manual) - Page 29
    during CD recording quality. To make the best possible recording, however, we recommend that you clean all surfaces over which tape travels before each recording parts in the tape path with a commercially available tape head demagnetizer. Cleaning the cabinet Clean the cabinet, panel and controls
  • Sony CFD-E90PS | Operating Instructions (primary manual) - Page 30
    batteries For remote control: 3 V DC, 2 size AAA (R03) batteries Power consumption AC 14 W Battery life For CD radio cassette-corder: FM recording Sony R14P: approx. 13.5 h Sony alkaline LR14: approx. 20 h Tape playback Sony R14P: approx. 7.5 h Sony alkaline LR14: approx. 15 h CD playback Sony R14P
  • Sony CFD-E90PS | Operating Instructions (primary manual) - Page 31
    24 for remote 24 C CD player 12 Choosing power sources 23 Cleaning cabinet 29 tape heads and tape path 29 Connecting AC power cord 24 Creating your own program 14 D, E, F, G, H Demagnetizing the tape heads 29 Display 12 I, J, K Improving broadcast reception 7 L Listening to the radio 6 Locating
  • Sony CFD-E90PS | Operating Instructions (primary manual) - Page 32
    For customers in the USA Please register this product on line at http://www.sony.com/productregistration. Proper registration will enable us to send you periodic mailings about new products, services and other important announcements. Registering your product will also allow us to contact you in the
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
CD Radio
Cassette-Corder
Operating Instructions
3-263-561-
11
(1)
© 2004 Sony Corporation
CFD-E90