Sony CFD-ZW770 Operating Instructions (primary manual) - Page 11

Press High-speed Dubbing

Page 11 highlights

Basic Operations 3 Deck B Deck A Start recording. To record from the CD player and the radio, press r on deck B (( is depressed automatically). To record from the tape, press r on deck B ((is depressed automatically). Then press ( on deck A. (For high speed dubbing, press HIGH-SPEED DUBBING instead of ( on deck A). Tips • Adjusting the volume or the audio emphasis (see pages 28 and 29) will not affect the recording level. • If the AM program makes a whistling sound after you have pressed r in step 3, set the ISS (Interference Suppress Switch) at the rear of the player to the position that most decreases the noise. • For the best results, use the AC power as a power source. Use these buttons for additional operations POWER p6 P To stop recording pause recording turn on/off the player Press p6 on deck B P on deck B Press the button again to resume recording. POWER To erase a recording, proceed as follows: 1 Insert a tape whose recording you want to erase into deck B. 2 Press TAPE untill "TAPE" appears in the display. 3 Press r. Basic Operations 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

Basic Operations
Basic Operations
11
3
Start recording.
To record from the CD player and
the radio, press
r
on deck B (
(
is depressed automatically).
To record from the tape, press
r
on deck B (
(
is depressed
automatically). Then press
(
on
deck A. (For high speed dubbing,
press HIGH-SPEED DUBBING
instead of
(
on deck A).
Deck B
To
Press
stop recording
p6
on deck B
pause recording
P
on deck B
Press the button again to
resume recording.
turn on/off the player
POWER
Use these buttons for additional operations
Tips
Adjusting the volume or
the audio emphasis (see
pages 28 and 29) will
not affect the recording
level.
If the AM program
makes a whistling
sound after you have
pressed
r
in step 3, set
the ISS (Interference
Suppress Switch) at the
rear of the player to the
position that most
decreases the noise.
For the best results, use
the AC power as a
power source.
POWER
p6
P
To erase a recording, proceed as follows:
1
Insert a tape whose recording you want to erase into deck
B.
2
Press TAPE untill “TAPE” appears in the display.
3
Press
r
.
Deck A