Sony CFD-ZW770 Operating Instructions (primary manual) - Page 32

Troubleshooting

Page 32 highlights

Troubleshooting General CD Player Symptom The power is not on. There is no audio. "no disc" lights in the display even when a CD is in place. The CD does not play. The sound drops out. The audio is weak or has poor quality. The picture of your TV becomes unstable. Remedy • Connect the AC power cord to a wall outlet securely. • Make sure the batteries are inserted correctly. • You cannot turn on the player with the remote when you operate the player on batteries (CFDZW750/ZW770 only). • Make sure the function you want to use appears in the display window. • Adjust the volume. • Unplug the headphones when listening through speakers. • Insert the CD with the label surface up. • Make sure that the CD compartment is closed. • Place the CD with the label surface up. • Clean the CD. • Take out the CD and leave the CD compartment open for about an hour to dry moisture condensation. • Make sure "Cd" appears in the display. • Reduce the volume. • Clean the CD, or replace it if the CD is badly damaged • Place the player in a location free from vibration. • Replace all the batteries with new ones if they are weak. • Move the player away from the TV. • If you are using the remote while listening to AM radio, noise may be heard. This is unavoidable. • If you are listening to an FM program near the TV with an indoor antenna, move the player away from the TV. Radio 32 Additional Information

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

Additional Information
32
Troubleshooting
Remedy
Connect the AC power cord to a wall outlet
securely.
Make sure the batteries are inserted correctly.
You cannot turn on the player with the remote
when you operate the player on batteries (CFD-
ZW750/ZW770 only).
Make sure the function you want to use appears
in the display window.
Adjust the volume.
Unplug the headphones when listening through
speakers.
• Insert the CD with the label surface up.
Make sure that the CD compartment is closed.
Place the CD with the label surface up.
Clean the CD.
Take out the CD and leave the CD compartment
open for about an hour to dry moisture
condensation.
Make sure “Cd” appears in the display.
Reduce the volume.
Clean the CD, or
replace it if the CD is badly
damaged
Place the player in a location free from
vibration.
Replace all the batteries with new ones if they
are weak.
Move the player away from the TV.
If you are using the remote while listening to
AM radio, noise may be heard. This is
unavoidable.
If you are listening to an FM program near the
TV with an indoor antenna, move the player
away from the TV.
General
CD Player
Radio
Symptom
The power is not on.
There is no audio.
“no disc“ lights in the display even
when a CD is in place.
The CD does not play.
The sound drops out.
The audio is weak or has poor
quality.
The picture of your TV becomes
unstable.