Home » Sony Manuals » Audio Components » Sony CMT-NE3 » Manual Viewer

Sony CMT-NE3 Operating Instructions - Page 10

Playing repeatedly - cd problem

Add to My Manuals
Save this manual to your list of manuals

Page 10 highlights

Other operations To Do this Stop play Press x. Pause Press X (or CD/NX on the unit). Press again to resume play. Select a track Press ./> repeatedly. Select an album Press ALBUM +/- repeatedly of MP3* after step 2. Find a point in a Keep pressing m/M during track playback and release it at the desired point. Remove a disc Press Z PUSH OPEN/CLOSE on the unit. * CMT-NE5 only. Notes • You cannot change the play mode during playback. • Some time may be needed to start playback of discs recorded in complex configurations such as many layers. • When the disc is inserted, the player reads all the audio tracks on that disc. If there are many albums or non-MP3 audio tracks on the disc, it may take a long time for play to begin or for the next MP3 audio track to start play. • Do not save unnecessary albums or audio tracks other than MP3 ones in the disc to be used for MP3 listening. We recommend that you do not save other types of audio tracks or unnecessary albums on a disc that has MP3 audio tracks. • An album that does not include an MP3 audio track is skipped. • Maximum album number: 150 (including root album) • The maximum number of MP3 audio tracks that can be contained on a single disc is 255. • Playback is possible up to 8 levels. • MP3 audio tracks are played back in the order that they are recorded on the disc. • Depending on the encoding/writing software, recording device, or the recording media used at the time an MP3 audio track is recorded, you may encounter such problems as disabled playback, sound interruptions and noise. • When playing back an MP3 audio track, the playback elapsed time indication may differ from the actual time in the following cases. - When you play back a VBR (variable bit rate) MP3 audio track - When you perform Fast Forward or Rewind (Manual Search) Playing repeatedly - Repeat Play You can play all the tracks or a single track on a disc repeatedly. MP3 audio tracks cannot be played on CMTNE3. Press REPEAT on the remote repeatedly during playback until "REP(EAT)" or "REP(EAT) 1" appears. REP(EAT): For all the tracks on the disc up to five times. REP(EAT) 1: For a single track only. To cancel Repeat Play Press REPEAT repeatedly until both "REP(EAT)" and "REP(EAT) 1" disappear. Note When you select "REP(EAT) 1", that track is repeated endlessly until "REP(EAT) 1" is canceled. 10GB

Section	Page
Table of Contents	3
How to use this manual	4
Playable discs	4
Hooking up the system	6
1 Connect the speakers.	6
2 Connect the FM and AM antennas.	6
3 For models with a voltage selector, set VOLTAGE SELECTOR to the local power line voltage. The v...	7
4 Connect the power cord to a wall outlet.	7
Setting the clock	8
1 Press ?/1 to turn on the system.	8
2 Press CLOCK/TIMER SET.	8
3 Press ./> repeatedly to set the hour.	8
4 Press ENTER.	8
5 Press ./> repeatedly to set the minute.	8
6 Press ENTER.	8
1 Press CLOCK/TIMER SET.	8
2 Press ./> until “CLOCK” appears, then press ENTER.	8
3 Do the same procedures as step 3 to 6 above.	8
Loading a disc	9
1 Press Z PUSH OPEN/CLOSE on the unit.	9
2 Place a disc with the label side up on the CD compartment.	9
3 Press Z PUSH OPEN/CLOSE on the unit again to close the lid of the CD compartment.	9
Playing a disc	9
1 Press CD to switch the function to CD.	9
2 Press PLAY MODE in stop mode repeatedly until the mode you want appears.	9
3 Press N.	9
Playing repeatedly	10
Creating your own program	11
1 Press CD to switch the function to CD.	11
2 Press PLAY MODE in stop mode repeatedly until “PGM” appears.	11
3 Press ./> repeatedly until the desired track number appears.	11
4 Press ENTER on the remote.	11
5 To program additional tracks, repeat steps 3 and 4.	11
6 Press N.	11
Presetting radio stations	12
1 Press TUNER/BAND repeatedly to select “FM” or “AM”.	12
2 Press TUNING MODE repeatedly until “AUTO” appears in the display.	12
3 Press +/– (or TUNING +/– on the unit).	12
4 Press TUNER MEMORY.	12
5 Press +/– (or TUNING +/– on the unit) repeatedly to select the desired preset number.	12
6 Press ENTER.	12
7 Repeat steps 3 through 6 to preset other stations.	12
1 Press TUNER/BAND repeatedly to select “FM” or “AM”.	12
2 Press TUNING MODE on the unit repeatedly until “AUTO” and “PRESET” disappear from the display.	12
3 Press +/– (or TUNING +/– on the unit) repeatedly to tune in the desired station.	12
4 Press TUNER MEMORY.	12
5 Press +/– (or TUNING +/– on the unit) repeatedly to select the desired preset number.	12
6 Press ENTER.	12
7 Repeat steps 3 through 6 to preset other stations.	12
Listening to the radio	13
1 Press TUNER/BAND repeatedly to select “FM” or “AM”.	13
2 Press TUNING MODE repeatedly until “PRESET” appears in the display.	13
3 Press +/– (or TUNING +/– on the unit) repeatedly to select the desired preset station.	13
1 Press TUNER/BAND repeatedly to select “FM” or “AM”.	13
2 Press TUNING MODE repeatedly until “AUTO” and “PRESET” disappear from the display.	13
3 Press +/– (or TUNING +/– on the unit) repeatedly to tune in the desired station.	13
Using the Radio Data System (RDS)	14
Loading a tape	15
1 Press Z PUSH OPEN on the unit.	15
2 Load a recorded/recordable tape into the cassette holder.	15
Playing a tape	15
1 Press TAPE to switch the function to TAPE.	15
2 Press N (or TAPE/N on the unit).	15
Recording your favorite CD tracks on a tape	16
1 Load a recordable tape.	16
2 Load a CD you want to record.	16
3 Press CD SYNCHRO.	16
4 Press z REC PAUSE/START.	16
Recording on a tape manually	16
1 Load a recordable tape.	16
2 Select the desired source to record.	16
3 Press z REC PAUSE/START.	16
4 Press z REC PAUSE/START, then start playing the desired source to record.	16
Adjusting the sound	17
1 Press EQ (or BASS/TREBLE on the unit) repeatedly to select “BASS” or “TREBLE”.	17
2 Press ./> (or TUNING +/– on the unit) repeatedly to adjust the level while “BASS” or “TREBLE” a...	17
Falling asleep to music	17
Waking up to music	18
1 Prepare the sound source you want to play.	18
2 Adjust the volume.	18
3 Press CLOCK/TIMER SET.	18
4 Press ./> repeatedly until “PLAY” appears, then press ENTER.	18
5 Set the time to start playing.	18
6 Set the time to stop playing following the same procedure as step 5.	18
7 Press ./> repeatedly until the desired sound source appears.	18
8 Press ENTER.	18
9 Press ?/1 to turn off the system.	18
Timer recording radio programs	19
1 Tune in the preset radio station (see “Listening to a preset station” on page13).	19
2 Press CLOCK/TIMER SET.	19
3 Press ./> repeatedly until “REC” appears, then press ENTER.	19
4 Set the time to start recording.	19
5 Set the time to stop recording following the same procedure as step 4.	19
6 Load a recordable tape.	19
7 Press ?/1 to turn off the system.	19
Turning off the display	20
Viewing information about the disc in the display	20
Hooking up optional components	21
1 Connect audio cords. See the illustration above.	21
2 Press FUNCTION repeatedly until “MD” appears. Start playing the connected component.	21
1 Connect audio cords.	21
2 Start recording manually. See “Recording on a tape manually” on page16.	21
Problems and remedies	22
1 Make sure the power cord and speaker cords are correctly and firmly connected.	22
2 Find your problem in the troubleshooting checklist below and take the indicated corrective action.	22
1 Disconnect the power cord.	24
2 Reconnect the power cord.	24
3 Press ?/1 to turn on the system.	24
4 Press x, ?/1 and turn volume to the left at the same time.	24
Messages	24
Precautions	26
On operating voltage	26
On safety	26
On placement	26
On heat buildup	26
On operation	26
Notes on discs	26
Cleaning the cabinet	26
To save a tape permanently	27
Before placing a cassette in the tape deck	27
When using a tape longer than 90minutes	27
Cleaning the tape heads	27
Demagnetizing the tape heads	27
Specifications	27

Match case Limit results 1 per page

Other operations

* CMT-NE5 only.

Notes

•

You cannot change the play mode during playback.

•

Some time may be needed to start playback of discs

recorded in complex configurations such as many

layers.

•

When the disc is inserted, the player reads all the

audio tracks on that disc. If there are many albums or

non-MP3 audio tracks on the disc, it may take a long

time for play to begin or for the next MP3 audio track

to start play.

•

Do not save unnecessary albums or audio tracks

other than MP3 ones in the disc to be used for MP3

listening. We recommend that you do not save other

types of audio tracks or unnecessary albums on a disc

that has MP3 audio tracks.

•

An album that does not include an MP3 audio track

is skipped.

•

Maximum album number: 150 (including root

album)

•

The maximum number of MP3 audio tracks that can

be contained on a single disc is 255.

•

Playback is possible up to 8 levels.

•

MP3 audio tracks are played back in the order that

they are recorded on the disc.

•

Depending on the encoding/writing software,

recording device, or the recording media used at the

time an MP3 audio track is recorded, you may

encounter such problems as disabled playback,

sound interruptions and noise.

•

When playing back an MP3 audio track, the playback

elapsed time indication may differ from the actual

time in the following cases.

–

When you play back a VBR (variable bit rate)

MP3 audio track

–

When you perform Fast Forward or Rewind

(Manual Search)

You can play all the tracks or a single track on a

disc repeatedly.

MP3 audio tracks cannot be played on CMT-

NE3.

Press REPEAT on the remote repeatedly

during playback until “REP(EAT)” or

“REP(EAT) 1” appears.

REP(EAT): For all the tracks on the disc up to

five times.

REP(EAT) 1: For a single track only.

To cancel Repeat Play

Press REPEAT repeatedly until both

“REP(EAT)” and “REP(EAT) 1” disappear.

Note

When you select “REP(EAT) 1”, that track is repeated

endlessly until “REP(EAT) 1” is canceled.

Do this

Stop play

Press

Pause

Press

(or CD/

on the unit).

Press again to resume play.

Select a track

Press

./>

repeatedly.

Select an album

of MP3*

Press ALBUM +/– repeatedly

after step 2.

Find a point in a

track

Keep pressing

m/M

during

playback and release it at the

desired point.

Remove a disc

Press

PUSH OPEN/CLOSE on

the unit.

Playing repeatedly

— Repeat Play