Sony CMT-NE3 Operating Instructions - Page 18

Waking up to music - Play Timer You can wake up to music at a preset time. Make sure you have set the clock (see "Setting the clock" on page 8). Use buttons on the remote for the operation. 1 Prepare the sound source you want to play. • CD: Load a disc. To start from a specific track, make a program (see "Creating your own program" on page 11). • TAPE: Load a tape (see "Playing a tape" on page 15). • TUNER: Tune in a radio station (see "Listening to the radio" on page 13). 2 Adjust the volume. 3 Press CLOCK/TIMER SET. 4 Press ./> repeatedly until "PLAY" appears, then press ENTER. "ON TIME" appears and the hour indication flashes. 5 Set the time to start playing. Press ./> repeatedly to set the hour, then press ENTER. The minute indication flashes. Press ./> repeatedly to set the minute, then press ENTER. 6 Set the time to stop playing following the same procedure as step 5. 7 Press ./> repeatedly until the desired sound source appears. Each time you press the button, the display changes cyclically as follows: t TUNER y CD T t TAPE T 8 Press ENTER. The start time, the stop time and the sound source, then the original display returns. 9 Press ?/1 to turn off the system. Other operations To Cancel the timer/ activate the timer/ check the setting Change the setting Do this 1 Press CLOCK/TIMER SELECT and "SELECT" appears. 2 Press ./> repeatedly until "PLAY", "REC" or "(TIMER) OFF" appears, then press ENTER. Start over from step 1. Notes • If you use Play Timer and Sleep Timer at the same time, Sleep Timer has priority. • Do not operate the system from the time the system turns on until the play starts (about 15 seconds before the preset time). • If the system is on about 15 seconds before the preset time, Play Timer will not be activated. • You cannot use the optional component connected to the MD jacks as sound sources for Play Timer. • You cannot activate Play Timer and Rec Timer at the same time. 18GB