Sony CNA-1 Operation Guide

Sony CNA-1 Manual

Get Sony CNA-1 PDF manuals and user guides View all Sony CNA-1 manuals
Add to My Manuals
Save this manual to your list of manuals

Sony CNA-1 manual content summary:

  • Sony CNA-1 | Operation Guide - Page 1
    CAMERA CONTROL NETWORK ADAPTOR CNA-1 OPERATION MANUAL [English] 1st Edition (Revised 3)
  • Sony CNA-1 | Operation Guide - Page 2
    Table of Contents Overview 3 Features 3 Examples of system configurations 4 Supported devices 8 Location and function of parts 8 Front panel 8 Rear panel 10 Starting and stopping the CNA-1 11 Menu operation 11 Menu operation from a web browser 11 Menu configuration 12 Transport Converting
  • Sony CNA-1 | Operation Guide - Page 3
    CNA-1 is a network device for expansion of the Sony USB controller to the CNA-1. Also, the CNA-1 supports the Gateway function. protocol provided from the CNA-1 to the camera network system. Master device function By working the CNA-1 as the master device of the camera network system, you can operate
  • Sony CNA-1 | Operation Guide - Page 4
    Camera head CCU MCS Mode: Client RCP MCS Mode: Client RCP MCS Mode: Client RCP MCS Mode: Client RCP MCS Mode: Client : LAN cable CNA-1 setup For details of the following setting items, see "Menu items" (page 12). CNS Configuration Gateway Configuration CNS Mode Master Mode Master IP Address
  • Sony CNA-1 | Operation Guide - Page 5
    MCS Mode: Client Camera head CCU MCS Mode: Client Network hub RCP MCS Mode: Client CNA-1 Camera head CCU CCA-5 I/F CCU AUX RCP MCS Mode: Client RCP CCA-5 I/F : LAN cable : CCA-5 cable CNA-1 setup For details of the following setting items, see "Menu items" (page 12). CNS Configuration
  • Sony CNA-1 | Operation Guide - Page 6
    Example for the Gateway function When controlling the Sony's camera from the expansion control panel This is the MCS connection via the LAN. Note The expansion control panel needs to be compatible with the simple protocol provided from the CNA-1. Expansion control panel Camera head CCU MCS Mode:
  • Sony CNA-1 | Operation Guide - Page 7
    controlling a expansion camera from the Sony's control panel (MSU, RCP) This is the MCS connection via the LAN. Note The expansion camera needs to be compatible with the simple protocol provided from the CNA-1. RCP MCS Mode: Client Expansion camera Network hub CNA-1 MSU MCS Mode: Master : LAN
  • Sony CNA-1 | Operation Guide - Page 8
    unit supports connection CNA-1's operating status. Flashing: The CNA-1 is updating the firmware, or cannot boot properly. Off: The CNA-1 is working normally. Note If the ALARM indicator flashes even though the CNA-1 is not updating, immediately stop using the CNA-1, and consult your Sony Service
  • Sony CNA-1 | Operation Guide - Page 9
    -1 is working in the Gateway Emulation mode according to the indicator turned on (RCP, MSU, or CAM Emulation mode). Off: The CNA-1 is not working in the Gateway Emulation mode. Note The MSU indicator works only if the HZC-MSCN1 optional software is installed. This indicator usually
  • Sony CNA-1 | Operation Guide - Page 10
    a USB mass storage device while the ACCESS indicator is flashing. Switch j RESET switch Press and hold for 10 seconds to reset the CNA-1 to the default setting. Rear panel 6 8 7 a Earth terminal Connect to a safety ground. To connect a ground terminal, use the following screw. • Thread Size
  • Sony CNA-1 | Operation Guide - Page 11
    than PoE, use a hub that is not compatible with PoE. Menu operation Menu operation from a web browser The menu for setting up the CNA-1 is operated on a PC via its web browser. • Supported OS: Windows 7/10 • Supported browser: Internet Explorer 8/10 • Display resolution: 1024 × 768 or higher Even
  • Sony CNA-1 | Operation Guide - Page 12
    or Gateway function. HD Cutout Sets the HD Cutout control function of the BPU. Security Changes the login password, or sets the access restriction to the Gateway TCP port. Manual Displays the operation manual of the CNA-1. Authentication To display the System, CNS, HD Cutout, and Security menus, the
  • Sony CNA-1 | Operation Guide - Page 13
    the LAN setting. These settings are fixed. 3. Date and Time Sets the date and time of the CNA-1. Set the date. Set the time. [Apply] button To display the System menu, Click the [System] stored. • The IP Configuration, Date and Time, and Password settings are not stored. 13 Menu operation
  • Sony CNA-1 | Operation Guide - Page 14
    device by selecting [Enable]. When you use the CNA-1 as the client by selecting [Disable], input the IP address of the connected master device to [Master IP Address]. Select the CNS mode. 14 Menu operation Input the device number of the CNA-1.* When the CNA-1 works in the Bridge mode, input the IP
  • Sony CNA-1 | Operation Guide - Page 15
    - If the CCU is connected to the CNA-1 with the CCA to LAN converting function converting function. Input the IP address of the target CNA-1 for the transport converting function. Notes • Do not set to [Enable] when the CNA-1 is working in the Master Mode. • The Gateway function does
  • Sony CNA-1 | Operation Guide - Page 16
    assigning process. Note Do not set the HD Cutout control function to [Enable] when you do not use the HD Cutout control function. 16 Menu operation
  • Sony CNA-1 | Operation Guide - Page 17
    settings are stored in the internal memory. 1. Password Change Changes the login password for the menu on the browser. Input the new password. To perform filtering by MAC address, select [ 17 Note If you have forgotten the password, reset the CNA-1 by pressing the RESET switch. 17 Menu operation
  • Sony CNA-1 | Operation Guide - Page 18
    Transport Converting Function Setting Transport converting with LAN The communication between the two CNA-1s is established with the simple protocol by converting the camera network system protocol to the simple protocol. You can perform the camera control on a network with many delays in which the
  • Sony CNA-1 | Operation Guide - Page 19
    Mode Target IP Address Device setup for the network B CNA-1 (B) setup CNS Configuration Gateway Configuration CNS Mode Master Mode need to input Variable Enable LAN Variable RCP Disable Enable IP address of the CNA-1 (B) Bridge Disable No need to input No need to input Variable Enable LAN
  • Sony CNA-1 | Operation Guide - Page 20
    Mode: MCS/Client Emulation Mode: CAM Device No.: 1 RCP (1) CNS Mode: MCS/Client Camera head Network CNA-1 (A-2) CNS Mode: Legacy Emulation Mode: RCP Network hub (A) Network hub (B) CNA-1 (B-2) CNS Mode: MCS/Client Emulation Mode: CAM Device No.: 2 CCU (2) CNS Mode: Legacy RCP (2) CNS Mode
  • Sony CNA-1 | Operation Guide - Page 21
    to input No need to input Variable Enable LAN TCP Port number of the CNA-1 (B-1) RCP Disable Enable IP address of the CNA-1 (A1) CNA-1 (A-2) setup Gateway Configuration TCP Port TCP Port number of the CNA-1 (B-2) Target IP Address IP address of the CNA-1 (B2) Other settings are the same as the
  • Sony CNA-1 | Operation Guide - Page 22
    as the camera number on network B by the MSU/RCP. On the example above, the CNA-1 (B-1) is recognized as camera 1, and the CNA-1 (B-2) is recognized as camera 2. Note You cannot set the same device number to multiple CNA-1s. RCP setup Network MSU setup Network CNS Mode Master IP Address CNS Mode
  • Sony CNA-1 | Operation Guide - Page 23
    Target IP Address RS232 or RS422 Variable No need to input Other settings are the same as "Transport converting with LAN" (page 18). CNA-1 (B) setup Gateway Configuration Transport Select Bitrate, Date Bit, Parity Bit, Stop Bit RS232 or RS422 Variable Other settings are the same as "Transport
  • Sony CNA-1 | Operation Guide - Page 24
    /8000 is not compatible with the operations that use the transport converting function. • The operations related to powering the camera on the camera's network. • Using the BARS function outputs the camera color bar when the CNA-1 is set to the Bridge mode. • The SD Detail function is enabled only
  • Sony CNA-1 | Operation Guide - Page 25
    USB controller : LAN cable : USB cable 2. Set the network Set the IP address and subnet mask of the CNA-1 and BPU4000 so that the communication between the CNA-1 and BPU is established. For details about settings, refer to the operation manual of the BPU. 25 HD Cutout Control Function Setting
  • Sony CNA-1 | Operation Guide - Page 26
    control function as necessary. For details about parameter, refer to the operation manual of the BPU. 1. HD Cutout Configuration Cutout Mode Perspective Parameters BPU. This setting is not stored on the CNA-1. 6. Set the parameters for the USB controller Set the parameters for the USB controller
  • Sony CNA-1 | Operation Guide - Page 27
    of the controller that is assigned for the Pan/Tilt/Zoom operation. Selects whether to reverse the direction for the Pan/Tilt/Zoom You can assign the function to the USB controller that is connected to the CNA-1 by using [Button Function Assignment]. Select the button function that is displayed in
  • Sony CNA-1 | Operation Guide - Page 28
    SpaceMouse Pro Up to two USB controllers can be connected to the CNA-1. When connecting two controllers, use the self-powered USB 2.0 compatible not be recognized even if it is connected to the USB connector. The operation axis is assigned to the 3D mouse as illustration below in the default setting
  • Sony CNA-1 | Operation Guide - Page 29
    For details about using the Gateway function, consult your Sony service representative. Specifications General Power requirements PoE Class 2 CCU PW (CCA) DC: 10.5 V - 30 V EXT I/O (D-SUB) DC: 10.5 V - 17 V Power consumption 2 W (CCU PW) Operating temperature 5ºC to 40ºC (41ºF to 104ºF) Storage
  • Sony CNA-1 | Operation Guide - Page 30
    15-pin Network connector RJ-45 (1) 100BASE-TX: IEEE 802.3u Accessories supplied Operation guide (1) Design and specifications are subject to change without notice. Note Always verify that the unit is operating properly before use. SONY WILL NOT BE LIABLE FOR DAMAGES OF ANY KIND INCLUDING, BUT NOT
  • Sony CNA-1 | Operation Guide - Page 31
    page > License information of the Web menu. To Obtain information on the source code and/or the source code for this software. Consult your nearest Sony Service. 31 Notice Concerning Software Governed by the GNU GPL/LGPL
  • Sony CNA-1 | Operation Guide - Page 32
    the purchasers of the equipment described in this manual. Sony Corporation expressly prohibits the duplication of any portion of this manual or the use thereof for any purpose other than the operation or maintenance of the equipment described in this manual without the express written permission of
  • Sony CNA-1 | Operation Guide - Page 33
    CNA-1 (SY) 4-431-096-04(1) Sony Corporation ©2012
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
CAMERA CONTROL NETWORK ADAPTOR
CNA-1
OPERATION MANUAL
[English]
1st Edition (Revised 3)