Sony DCR-DVD710 Operating Guide - Page 83
File No. File Number, Nightshot Light, Guideframe, Flash Mode Dcr, Dvd710/dvd810
UPC - 027242727694
View all Sony DCR-DVD710 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 83 highlights
Customizing Your Camcorder Number of still images recordable on the internal memory (DCR-DVD810) You can record up to 9,999 still images on the internal memory. The recordable number of still images varies depending on the recording condition. Number of still images recordable on a "Memory Stick PRO Duo" (approx.) 1.0M 1152 × 864 VGA (0.3M) 640 × 480 512MB 1GB 2GB 4GB 8GB 880 1800 3700 7200 14500 2800 5800 11500 23000 47000 b Notes • Numbers in the table are of when using a "Memory Stick PRO Duo" made by Sony Corporation. The recordable number of still images varies depending on the recording conditions or the type of "Memory Stick." z Tips • You can use a "Memory Stick PRO Duo" with a capacity of 256MB or smaller for recording still images. • The numbers in the table are of the recordable number of still images of the maximum image size that can be recorded with your camcorder. Check the actual recordable number on the screen when you are recording still images (p. 133). FILE NO. (File number) B SERIES Assigns file numbers in sequence, even if the "Memory Stick PRO Duo" is replaced with another one. RESET Assigns individual file numbers for each "Memory Stick PRO Duo." NIGHTSHOT LIGHT See page 80. GUIDEFRAME See page 81. FLASH MODE (DCRDVD710/DVD810) You can set this function when you use an external flash (optional) that is compatible with your camcorder. B ON ( ) Flashes every time. AUTO Flashes automatically. b Notes • Remove any dust from the surface of the flash before using it. Flash effect may be impaired if heat discoloration or dust obscures the lamp. • If you use the flash in bright places such as when shooting a backlit subject, the flash may not be effective. FLASH LEVEL (DCRDVD710/DVD810) You can set this function when you use an external flash (optional) that is compatible with your camcorder. HIGH( ) Makes the flash level higher. B NORMAL( ) LOW( ) Makes the flash level lower. Continued , 83