Sony DCR-IP7BT Operating Instructions

Sony DCR-IP7BT - Network Handycam Ip Manual

Get Sony DCR-IP7BT - Network Handycam Ip PDF manuals and user guides View all Sony DCR-IP7BT manuals
Add to My Manuals
Save this manual to your list of manuals

Sony DCR-IP7BT manual content summary:

  • Sony DCR-IP7BT | Operating Instructions - Page 1
    reference. Owner's Record The model and serial numbers are located on the bottom. Record the serial number in the space provided below. Refer to these numbers whenever you call upon your Sony dealer regarding this product. Model No. Model No. AC- Serial No. Serial No. DCR-IP5/IP7BT ©2001 Sony
  • Sony DCR-IP7BT | Operating Instructions - Page 2
    you call 416-499-SONY (Canada only). Caution: Do not handle damaged or leaking lithium ion battery. DCR-IP7BT only Countries and areas where you can use network functions are restricted. For details, refer to the separate Network Function Operating Instructions. "Memory Stick" (DCR-IP7BT only) This
  • Sony DCR-IP7BT | Operating Instructions - Page 3
    Name: SONY Model No.: DCR-IP5, DCR-IP7 Responsible Party:Sony Electronics Inc not expressly approved in this manual could void your authority to comply with the limits for a Class B digital device, pursuant to Part 15 of the used in accordance with the instructions, may cause harmful interference
  • Sony DCR-IP7BT | Operating Instructions - Page 4
    on a "Memory Stick" using your computer via the USB cable (p. 156) (DCR-IP7BT only) Accessing the Internet via a Bluetooth device (DCR-IP7BT only) •Accessing the Internet and sending/receiving your e-mail. For details, refer to the network function operating instructions supplied with your camcorder
  • Sony DCR-IP7BT | Operating Instructions - Page 5
    ZOOM item in the menu settings.) •Fader (p. 51) •Picture effect (p. 54) •Digital effect (p. 56) •Title (p. 89, 95) •MEMORY MIX (p. 132) (DCR-IP7BT only) Functions to give a natural appearance to your recordings •Manual focus (p. 65) •Landscape mode (p. 59) Functions used after recording •END SEARCH
  • Sony DCR-IP7BT | Operating Instructions - Page 6
    on a tape. MEMORY/NETWORK (DCR-IP7BT only) MEMORY: Use this mode when you record on a "Memory Stick," or play back or edit an image in a "Memory Stick." NETWORK: Use this mode when you use the network function. For details, refer to the supplied network function operating instructions. VCR Use this
  • Sony DCR-IP7BT | Operating Instructions - Page 7
    function. OK - LCD BRT + The procedure above is referred to as "Select [XXXX], then press the center z on the control button" in this operating instructions. When an item is selected A green bar appears above the item. If certain items are not available The color of those items changes to gray
  • Sony DCR-IP7BT | Operating Instructions - Page 8
    Introduction - Basic operations How to use the FN screen If FN is not displayed on the screen, press DISPLAY or the center z on the control button. DISPLAY 1-3 (1) Select FN with v/V/b/B on the control button, then press the center z. The FN screen appears. PAGE1 PAGE2 PAGE3 EXIT MENU FOCUS
  • Sony DCR-IP7BT | Operating Instructions - Page 9
    *, M * * (DCR-IP7BT only) See page 112 for the MEMORY/NETWORK mode (DCR-IP7BT only). To turn on/off the screen buttons Press DISPLAY. However, the finder can be used only in mirror mode. A screen where the FN button is displayed is referred to as the FN screen in this operating instructions. 9
  • Sony DCR-IP7BT | Operating Instructions - Page 10
    of contents Main Features 4 Introduction - Basic operations 6 Quick Start Guide 12 Getting started Using this manual 14 Checking supplied accessories 16 Step 1 Preparing the power supply ... 18 Installing the battery pack 18 Charging the battery pack 19 Connecting to a wall outlet 21 Step
  • Sony DCR-IP7BT | Operating Instructions - Page 11
    "Memory Stick" using your computer - DCR-IP7BT only ...... 156 Network operation - DCR-IP7BT only Accessing the network 162 Troubleshooting Types of trouble and battery pack 174 About i.LINK 176 Using your camcorder abroad .......... 178 Maintenance information and precautions 179 Specifications
  • Sony DCR-IP7BT | Operating Instructions - Page 12
    Start Guide This guide introduces you to the basic operations for recording/playback. See the page in parentheses "( )" for more information. Connecting the power cord (p. 21) Use the battery pack when using your camcorder outdoors (p. 18). Open the jack cover. AC power adaptor (supplied) Connect
  • Sony DCR-IP7BT | Operating Instructions - Page 13
    MEMORY/ NETWORK VCR POWER (CHG) OFF ON MODE 2 Select , then press the center z on the control button to rewind the tape. 3 Select , then press the center z on the control button to start playback. NOTE Do not pick up your camcorder by holding the viewfinder, the LCD panel, the battery pack
  • Sony DCR-IP7BT | Operating Instructions - Page 14
    DCRMEMORY/NETWORK mark1) (on the POWER switch) IP5 IP7BT - z z Provided - Not provided 1) The models with MEMORY/NETWORK marked on the POWER switch is provided with memory and network functions. See page 162 for details. Note on the MICROMV format Your camcorder is based on the MICROMV format
  • Sony DCR-IP7BT | Operating Instructions - Page 15
    Getting started Using this manual Precautions on camcorder care Lens and LCD screen/finder (on mounted as in a car parked in the sun or under direct sunlight [b]. •Be careful when placing the camcorder near a window or outdoors. Exposing the LCD screen, the finder or the lens to direct sunlight
  • Sony DCR-IP7BT | Operating Instructions - Page 16
    Checking supplied accessories Make sure that the following accessories are supplied with your camcorder. 1 2 3 RMT-817 or RMT-818 4 5 6 7 8 9 q; qa qs qd qf qg qh qj 16
  • Sony DCR-IP7BT | Operating Instructions - Page 17
    supplied accessories 1 Wireless Remote Commander (1) (p. 192) RMT-817: DCR-IP7BT RMT-818: DCR-IP5 2 AC-L20A AC power adaptor (1), the power cord (1) (p. 19) 3 NP-FF50 battery pack (1) (p. 18, 19) 4 Size AA (R6) batteries for the Remote Commander (2) (p. 192) 5 USB cable* (1) (p. 157) 6 "Memory
  • Sony DCR-IP7BT | Operating Instructions - Page 18
    Step 1 Preparing the power supply Installing the battery pack We recommend that you use the battery pack when you use your camcorder outdoors. (1) While turning down the VBATT (battery) release lever in the direction of the arrow 1, remove the battery terminal cover in the direction of the arrow 2.
  • Sony DCR-IP7BT | Operating Instructions - Page 19
    is completed, the CHG lamp goes out (full charge). 2 4 CAMERA MEMORY/ NETWORK VCR POWER (CHG) OFF ON MODE 1 CHG lamp After charging the battery pack Disconnect the AC power adaptor from the DC IN jack on your camcorder. Note Prevent metallic objects from coming into contact with the metal
  • Sony DCR-IP7BT | Operating Instructions - Page 20
    the power supply While the battery pack is being charged, the CHG lamp flashes in the following cases: - The battery pack is not installed correctly. - Something is wrong with the battery pack. When you use the AC power adaptor Place the AC power adaptor near the wall outlet. If any trouble occurs
  • Sony DCR-IP7BT | Operating Instructions - Page 21
    " is a trademark of Sony Corporation. Connecting to a wall outlet When you intend to use your camcorder for a long time, we recommend that you power it from a wall outlet using the AC power adaptor. (1) Open the jack cover and connect the AC power adaptor supplied with your camcorder to the DC IN
  • Sony DCR-IP7BT | Operating Instructions - Page 22
    1 Preparing the power supply Notes •The AC power adaptor cannot supply power if the battery pack is attached to your camcorder. •The DC IN jack has "source priority." This means that the battery pack cannot supply power when the power cord is connected to the DC IN jack, even when the power cord is
  • Sony DCR-IP7BT | Operating Instructions - Page 23
    battery installed in your camcorder will have been discharged (p. 181). First, set your area, then the daylight saving time, the year, the month, the day, the hour and then the minute. (1) Set the POWER switch to CAMERA or MEMORY (DCR-IP7BT only). The CAMERA or MEMORY lamp (DCR-IP7BT only
  • Sony DCR-IP7BT | Operating Instructions - Page 24
    Step 2 Setting the date and time (6) Select your area, then press the center z on the control button. (7) Select whether your area is in daylight saving time or not, then press the center z on the control button. When your area is in daylight saving time, select ON, when not in daylight saving time,
  • Sony DCR-IP7BT | Operating Instructions - Page 25
    models. If you do not set the date and time and are recorded on the tape or the "Memory Stick" (DCR-IP7BT only) as the data code. Note on the time indicator The internal clock of your camcorder operates on a 12-hour cycle. - 12:00 AM stands for midnight. - 12:00 PM stands for noon
  • Sony DCR-IP7BT | Operating Instructions - Page 26
    Step 2 Setting the date and time Area code 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 Time-zone Area setting differences GMT Lisbon, London GMT+01:00 Berlin, Paris GMT+02:00 Helsinki, Cairo GMT+03:00 Moscow, Nairobi GMT+03:30 Tehran GMT+04:00 Abu Dhabi, Baku GMT+04:30 Kabul GMT+05:00
  • Sony DCR-IP7BT | Operating Instructions - Page 27
    3 Inserting a cassette (1) Install the battery pack, or connect the AC power adaptor for the power supply (p. 18 to 22). (2) Slide sure to disconnect the A/V connecting cable, i.LINK cable, and USB cable (DCR-IP7BT only). If you open the cassette lid without disconnecting the cables, the cables
  • Sony DCR-IP7BT | Operating Instructions - Page 28
    Step 3 Inserting a cassette Note on the label Labels may cause a malfunction of the camcorder. Therefore, be sure not to: •Stick on any labels than the one supplied. •Stick the label onto any part of the cassette other than the label position [a]. [a] 28
  • Sony DCR-IP7BT | Operating Instructions - Page 29
    camcorder automatically focuses for you. (1) Remove the lens cap and pull the lens cap string to fix it. (2) Install the power source. See "Step 1 Preparing the power supply front of your camcorder lights up. To stop recording, press START/STOP again. 5 CAMERA MEMORY/ NETWORK VCR POWER (CHG) OFF
  • Sony DCR-IP7BT | Operating Instructions - Page 30
    check the following: - When you change the battery pack, set the POWER switch to OFF (CHG). If you leave your camcorder in standby mode for 5 minutes while a cassette is inserted Your camcorder automatically turns off. This is to save battery power and to prevent battery and tape wear. To resume the
  • Sony DCR-IP7BT | Operating Instructions - Page 31
    at the subject in the viewfinder. In CAMERA or MEMORY (DCR-IP7BT only) mode. Pull out the viewfinder, and open the LCD panel and rotate it as illustrated below. The indicator appears in the viewfinder and on the LCD screen. When the POWER
  • Sony DCR-IP7BT | Operating Instructions - Page 32
    picture Adjusting the brightness of the LCD screen When recording in bright conditions, set the LCD BACKLIGHT switch to OFF. (1) In CAMERA, MEMORY (DCR-IP7BT only), playback, or playback pause mode, select FN, then press the center z on the control button. The PAGE1 screen appears. (2) Select PAGE2
  • Sony DCR-IP7BT | Operating Instructions - Page 33
    be affected. The setting of the LCD BACKLIGHT switch Normally, set it to ON. When you use the camcorder in bright conditions using the battery pack, set it to OFF. This position saves battery power. Adjusting the viewfinder If you record pictures with the LCD panel closed, check the picture with the
  • Sony DCR-IP7BT | Operating Instructions - Page 34
    (subject appears farther away) W T W W T T To use a zoom greater than 10× A zoom greater than 10× is performed digitally. To activate digital zoom, set D ZOOM to 20× or 120× in the menu settings. The digital zoom function is set to OFF as a default setting (p. 102). The right side of the bar
  • Sony DCR-IP7BT | Operating Instructions - Page 35
    down toward the "T" side. When the POWER switch is set to MEMORY (DCR-IP7BT only) You cannot use the digital zoom. The indicators displayed in recording mode The indicators are not recorded on the tape. Remaining battery time indicator Micro Cassette Memory indicator STBY/REC indicator 40min REC
  • Sony DCR-IP7BT | Operating Instructions - Page 36
    Press BACK LIGHT in CAMERA or MEMORY (DCR-IP7BT only) mode. The . indicator appears on the screen. To cancel, press BACK LIGHT again. BACK LIGHT When the backlight function is activated The backlight function will be canceled when you set EXPOSURE to MANUAL
  • Sony DCR-IP7BT | Operating Instructions - Page 37
    . Note The self-timer recording mode is automatically canceled when: - The self-timer recording is finished. - The POWER switch is set to OFF (CHG) or VCR. When the POWER switch is set to MEMORY (DCR-IP7BT only) You can also record a still image on the "Memory Stick" with the self-timer (p. 121). 37
  • Sony DCR-IP7BT | Operating Instructions - Page 38
    screen appears. (3) Select END SCH, then press the center z on the control button. The last 5 seconds of the recorded section are played back and your camcorder returns to the standby mode. You can monitor the sound from the speaker. 1 FN 2 PAGE2 3 END SCH To return to the FN screen Select EXIT
  • Sony DCR-IP7BT | Operating Instructions - Page 39
    Commander supplied with your camcorder. (1) Install the power source and insert a recorded tape. (2) Press OPEN to open the LCD panel. (3) Set the POWER switch to VCR. The camcorder turns appears. 4 5 6 OK FN - VOL + VOL bar 2 1 3 CAMERA MEMORY/ NETWORK VCR POWER (CHG) OFF ON MODE 39
  • Sony DCR-IP7BT | Operating Instructions - Page 40
    on the LCD screen You can turn the LCD panel over and move it back to the camcorder body with the LCD screen facing out. If you leave the power on for a long time Your camcorder gets warm. However, this is not a malfunction. When you open or close the LCD panel Before you
  • Sony DCR-IP7BT | Operating Instructions - Page 41
    being displayed disappear from the screen. To display the indicators, press DISPLAY again. DISPLAY Playback - Basics Using the data code function Your camcorder automatically records not only images on the tape but also the recording data (date/time and various settings when recorded) (Data code
  • Sony DCR-IP7BT | Operating Instructions - Page 42
    mode indicator [c] White balance indicator [d] Gain indicator [e] Shutter speed indicator [f] Aperture value indicator Various settings Various settings is your camcorder's information when you recorded. In recording mode, the various settings are not displayed. When you use the data code function
  • Sony DCR-IP7BT | Operating Instructions - Page 43
    you close the LCD panel and open it again, it takes about 1 minute to display the correct remaining battery time. Various playback modes To operate the video control buttons, set the POWER switch to VCR. To view a still image (playback pause) •Select , then press the center z on the control button
  • Sony DCR-IP7BT | Operating Instructions - Page 44
    stop a tape To rewind a tape To fastforward a tape When the playback pause mode lasts for 5 minutes The playback pause mode will be released, then the camcorder stops the playback. To resume playback, select , then press the center z on the control button or press PLAY on the Remote Commander. 44
  • Sony DCR-IP7BT | Operating Instructions - Page 45
    from a wall outlet using the AC power adaptor (p. 21). Also, refer to the operating instructions of your TV. Open the jack cover. Connect your camcorder to the TV using the A/V connecting cable. Then, set the TV/VCR selector on the TV to VCR. The supplied A/V connecting cable is equipped with
  • Sony DCR-IP7BT | Operating Instructions - Page 46
    yellow (video) plug of the A/V connecting cable. Connect the S video plug to the S video jack on the TV or VCR. This connection produces higher quality MICROMV format pictures. To display the screen indicators on the TV screen Set DISPLAY via to V-OUT/LCD in the menu settings (p. 102). You can turn
  • Sony DCR-IP7BT | Operating Instructions - Page 47
    . Besides the operation described here, your camcorder can record still images on a "Memory Stick" (DCR-IP7BT only) (p. 118). (1) In standby shake your camcorder. The image may fluctuate. •The tape photo recording function does not work during the following operations: - Fader - Digital effect If
  • Sony DCR-IP7BT | Operating Instructions - Page 48
    the self-timer recording using the Remote Commander. Note The self-timer recording mode is automatically canceled when: - The self-timer recording is finished. - The POWER switch is set to OFF (CHG) or VCR. 48
  • Sony DCR-IP7BT | Operating Instructions - Page 49
    Advanced Recording Operations Using the wide mode You can record a 16:9 wide picture to watch on a 16:9 wide-screen TV (16:9WIDE). Black bands appear on the screen during recording in 16:9WIDE mode [a]. The pictures viewed during playing back on a normal TV [b] or a wide -screen TV [c] are
  • Sony DCR-IP7BT | Operating Instructions - Page 50
    the following functions: - Old movie - Bounce During recording You cannot select or cancel the wide mode. When you cancel the wide mode, set your camcorder to the standby mode and then set 16:9WIDE to OFF in the menu settings. Connection for a TV Pictures recorded in 16:9WIDE mode automatically
  • Sony DCR-IP7BT | Operating Instructions - Page 51
    Advanced Recording Operations Using the fader function You can fade in or out to give your recording a professional appearance. [a] STBY NORM. FADER (fader) REC MOSC. FADER (mosaic) BOUNCE1) 2) [b] STBY REC MONOTONE When fading in, the picture gradually changes from black-and-white to color
  • Sony DCR-IP7BT | Operating Instructions - Page 52
    /STOP. The fader indicator flashes, then lights up. After the fade in/out is carried out, your camcorder automatically returns to the normal mode. 1 5 FN 2,3 FADER FADER OFF OK NORM. MOSC. BOUN- MONO while using the fader function, and vice versa. - Digital effect - Tape Photo recording 52
  • Sony DCR-IP7BT | Operating Instructions - Page 53
    mode or when using these functions: - D ZOOM is set to 20× or 120× in the menu settings - Wide mode - Picture effect - PROGRAM AE When the POWER switch is set to MEMORY (DCR-IP7BT only) You cannot use the fader function. 53
  • Sony DCR-IP7BT | Operating Instructions - Page 54
    Using special effects - Picture effect You can digitally process images to obtain special effects like those in films . (5) Press DISPLAY to turn off the menu. 1 FN 5 2 MENU 3,4 MANUAL SET PROGRAM AE P EFFECT WHT BAL AUTO SHTR RETURN OFF NEG. ART SEPIA B&W SOLARIZE SLIM STRETCH PASTEL MOSAIC
  • Sony DCR-IP7BT | Operating Instructions - Page 55
    function off Set P EFFECT to OFF in the menu settings. While using the picture effect function You cannot select the old movie mode with the digital effect function. When you set the POWER switch to OFF (CHG) The picture effect will be automatically canceled. 55
  • Sony DCR-IP7BT | Operating Instructions - Page 56
    You can add special effects to recorded pictures using the various digital functions. The sound is recorded normally. STILL You can brightly. OLD MOVIE You can add an old movie-type atmosphere to pictures. Your camcorder automatically sets the wide mode to ON, the picture effect to SEPIA, and sets
  • Sony DCR-IP7BT | Operating Instructions - Page 57
    effect mode appears. (4) Select the desired digital effect mode, then press the center z on the control button. In STILL and LUMI. modes, the still image is stored in memory. (5) Select -/+, then press the center z on the control button repeatedly to adjust the effect. You can also adjust the
  • Sony DCR-IP7BT | Operating Instructions - Page 58
    work in slow shutter or old movie mode When you set the POWER switch to OFF (CHG) The digital effect will be automatically canceled. When recording in slow shutter mode Auto focus may not be effective. Focus manually using a tripod. Shutter speed Shutter speed number SLOW SHTR 1 SLOW SHTR 2 SLOW
  • Sony DCR-IP7BT | Operating Instructions - Page 59
    use the PROGRAM AE (Auto Exposure) function to suit your specific shooting requirements. Spotlight This mode prevents people's faces, for for when you are recording distant subjects such as mountains and prevents your camcorder from focusing on glass or metal mesh in windows when you are recording
  • Sony DCR-IP7BT | Operating Instructions - Page 60
    function (1) In standby or MEMORY (DCR-IP7BT only) mode, select FN, screen. 1 FN 5 2 MENU 3,4 MANUAL SET PROGRAM AE P EFFECT WHT BAL AUTO SHTR RETURN AUTO SPOTLIGHT PORTRAIT to AUTO in the menu settings in step 4. Notes •Because your camcorder is set to focus only on subjects in the middle to far
  • Sony DCR-IP7BT | Operating Instructions - Page 61
    do not work in PROGRAM AE mode: - Slow shutter - Old movie - Bounce •The digital effect function does not work in low lux mode: •While shooting in MEMORY mode, the low lux mode does not work. (The indicator flashes.) (DCR-IP7BT only) •The SteadyShot function does not work in low lux mode. When WHT
  • Sony DCR-IP7BT | Operating Instructions - Page 62
    Adjusting the white balance manually You can manually adjust and set the white balance. This adjustment makes white subjects look white and allows more natural color balance. Normally white balance is automatically adjusted. (1) In CAMERA or MEMORY (DCR-IP7BT only) mode, select FN, then press the
  • Sony DCR-IP7BT | Operating Instructions - Page 63
    Advanced Recording Operations Adjusting the white balance manually To return to the automatic white balance for about 10 seconds after setting the POWER switch to CAMERA to get better adjustment when: - You detach the battery for replacement. - You bring your camcorder from the interior of a house
  • Sony DCR-IP7BT | Operating Instructions - Page 64
    manually in the following cases: - To make a fine exposure adjustment - To shoot a bright subject with a dark background - To record dark pictures (e.g. night scenes) faithfully (1) In CAMERA or MEMORY (DCR-IP7BT exposure manually, the backlight function does not work. Your camcorder automatically
  • Sony DCR-IP7BT | Operating Instructions - Page 65
    (1) In CAMERA or MEMORY (DCR-IP7BT only) mode, select FN, then press the center z on the control button. The PAGE1 screen appears. (2) Select FOCUS, then press the center z on the control button. The FOCUS screen used for adjusting the focus appears. (3) Select MANUAL
  • Sony DCR-IP7BT | Operating Instructions - Page 66
    Focusing manually To return to the FN screen Select OK, then press the center z button. The focus is set to the infinity position and the indicator appears. Use this mode when your camcorder focuses on near by objects even though you are trying to shoot a distant object. To focus precisely It
  • Sony DCR-IP7BT | Operating Instructions - Page 67
    . 1 FN 5 2 MENU 3,4 MANUAL SET P EFFECT RETURN STBY OFF NEG. ART SEPIA B&W SOLARIZE MANUAL SET STBY P EFFECT SEPIA RETURN Advanced in your camcorder when you have processed the image using the picture effect function. However, you can record images on a "Memory Stick" (DCR-IP7BT only) (p.
  • Sony DCR-IP7BT | Operating Instructions - Page 68
    back a tape with picture effects Pictures processed by the picture effect function Pictures processed by the picture effect function are not output through the i.LINK (MICROMV) jack. When you set the POWER switch to OFF (CHG) or stop playback The picture effect function is automatically canceled. 68
  • Sony DCR-IP7BT | Operating Instructions - Page 69
    when the mode is selected, the picture being displayed is stored in memory as a still image. (5) Select -/+, then press the center z on the control button repeatedly to adjust the effect. See page 56 for details on each digital effect mode. (6) Press DISPLAY to turn off the screen buttons. Pressing
  • Sony DCR-IP7BT | Operating Instructions - Page 70
    record images on a "Memory Stick" (DCR-IP7BT only) (p. 123, 128), or on a VCR using your camcorder as a player. Pictures processed by the digital effect function Pictures processed by the digital effect function are not output through the i.LINK (MICROMV) jack. When you set the POWER switch to OFF
  • Sony DCR-IP7BT | Operating Instructions - Page 71
    buttons These buttons function the same as the control button on the camcorder. 2 FN MULTI SRCH 3,4 MULTI SCH END [a] MULTI SCH END SELECT DIRECTION [b] The control button 1 CAMERA MEMORY/ NETWORK VCR POWER (CHG) OFF ON MODE [a] The picture being fast-forwarded or rewound [b] The
  • Sony DCR-IP7BT | Operating Instructions - Page 72
    and the white portion of the bar indicates the recorded portion. X/x/C/c/EXECUTE buttons These buttons function the same as the control button on the camcorder. The control button 5 MULTI SCH END MULTI SCH END [c] [d] JUL/4/02 12:05:56AM [e] [c] The actual point you are trying to search for
  • Sony DCR-IP7BT | Operating Instructions - Page 73
    MULTI SCH screen appears. During searching The other functions of this camcorder do not work. The thumbnail images displayed on the MULTI you use the multi-picture search function with the digital effect activated The digital effect will be canceled. Some of the 11 Memory of the tape (p. 101). 73
  • Sony DCR-IP7BT | Operating Instructions - Page 74
    Searching for a scene - Multi-picture search Notes • Thumbnails may not be displayed depending on the condition of the tape. This is not a malfunction. • Noise may appear on the thumbnails. However, this has no effect on the recorded images. When you select < or ,, then press the center z on the
  • Sony DCR-IP7BT | Operating Instructions - Page 75
    These buttons function the same as the control button on the camcorder. The control button 2 SEARCH MODE TITLE SEARCH 1 HELLO! 2 CONGRATULATIONS! 3 HAPPY NEW YEAR! 4 PRESENT 5 GOOD MORNING 6 WEDDING 1 CAMERA MEMORY/ NETWORK VCR POWER (CHG) OFF ON MODE 3 [a] [b] TITLE SEARCH 3 HAPPY NEW YEAR
  • Sony DCR-IP7BT | Operating Instructions - Page 76
    Searching the boundaries of recorded tape by title - Title search To stop searching Press STOP on the Remote Commander. If the tape has a blank portion between recorded portions The title search function may not work correctly. To superimpose a title See page 89. 76
  • Sony DCR-IP7BT | Operating Instructions - Page 77
    function the same as the control button on the camcorder. The control button 2 SEARCH MODE DATE SEARCH 1 SEP / 5 / 02 2 SEP / 6 / 02 3 DEC / 24 / 02 4 JAN / 1 / 03 5 FEB / 11 / 03 6 APR / 29 / 03 1 CAMERA MEMORY/ NETWORK VCR POWER (CHG) OFF ON MODE 3 [a] [b] DATE SEARCH 1 SEP / 5 / 02 2 SEP
  • Sony DCR-IP7BT | Operating Instructions - Page 78
    Searching a recording by date - Date search To stop searching Press STOP on the Remote Commander. If the tape has a blank portion between recorded portions The date search function may not work correctly. Micro Cassette Memory The Micro Cassette Memory can hold 20 recording date data. 78
  • Sony DCR-IP7BT | Operating Instructions - Page 79
    same as the control button on the camcorder. The control button 2 SEARCH MODE PHOTO SEARCH 1 SEP / 5 / 02 5 : 30PM 2 SEP / 6 / 02 8 : 50AM 3 DEC / 24 / 02 1 0 : 30AM 4 JAN / 1 / 03 1 1 : 25PM 5 FEB / 11 / 03 4 : 11PM 6 APR / 29 / 03 1 : 45PM 1 CAMERA MEMORY/ NETWORK VCR POWER (CHG) OFF ON MODE
  • Sony DCR-IP7BT | Operating Instructions - Page 80
    Searching for a photo - Photo search To stop searching Press STOP on the Remote Commander. If the tape has a blank portion between recorded portions The photo search function may not work correctly. The number of photos that can be searched for The available number is up to approximate 400 photos.
  • Sony DCR-IP7BT | Operating Instructions - Page 81
    , then set the input selector to LINE. Refer to the operating instructions of the VCR. (3) Set the POWER switch to VCR. (4) Play back the recorded tape on your camcorder. (5) Start recording on the VCR. Refer to the operating instructions of your VCR. Editing A/V : Signal flow S VIDEO or VIDEO IN
  • Sony DCR-IP7BT | Operating Instructions - Page 82
    and audio signals are transmitted in digital form for highquality editing. You cannot dub the titles, displayed indicators, the contents of Micro Cassette Memory, or letters on the "Memory Stick" index screen (DCR-IP7BT only). (You cannot connect the camcorder to a DV product.) (1) Insert a blank
  • Sony DCR-IP7BT | Operating Instructions - Page 83
    on the recorder, and stop the playback on the camcorder. You can connect only one recorder using the i.LINK cable See page 176 for more information about i.LINK. The following functions do not work during digital editing: - Picture effect - Digital effect Note on playback pause pictures When you dub
  • Sony DCR-IP7BT | Operating Instructions - Page 84
    VCR that has video/audio outputs. Use your camcorder as a recorder. 1 Switching the video input jack of the A/V connecting cable The supplied A/V connecting cable is equipped with an S video VIDEO VCR SET VIDEOINPUT RETURN VIDEO S VIDEO 6 1 CAMERA MEMORY/ NETWORK VCR POWER (CHG) OFF ON MODE 84
  • Sony DCR-IP7BT | Operating Instructions - Page 85
    (The default setting is LCD.) (p. 102). (1) Insert a blank tape (or a tape you want to record over) into your camcorder and insert a recorded tape into the VCR. (2) Set the POWER switch to VCR. (3) Select FN, then press the center z on the control button. The PAGE1 screen appears. (4) Select PAGE3
  • Sony DCR-IP7BT | Operating Instructions - Page 86
    Select , then press the center z on the control button on your camcorder and stop the playback of the VCR. If your VCR is a higher quality MICROMV format pictures. Note (DCR-IP7BT only) When you press MEMORY PLAY on the Remote Commander in step 5, an image recorded on the "Memory Stick" is displayed
  • Sony DCR-IP7BT | Operating Instructions - Page 87
    When using the i.LINK cable Simply connect the supplied i.LINK cable to the i.LINK (MICROMV) jack of your camcorder and to the i.LINK (MICROMV) jack of the MICROMV product. With digitalto-digital connection, video and audio signals are transmitted in digital form for highquality editing. (You cannot
  • Sony DCR-IP7BT | Operating Instructions - Page 88
    only one recorder using the i.LINK cable. When you dub a picture in digital form The color of the display may be uneven. However, this does not affect with the i.LINK (MICROMV) jack The recorded picture becomes rough. And when you play back the picture using your camcorder, the picture may jitter
  • Sony DCR-IP7BT | Operating Instructions - Page 89
    Editing Superimposing a title You can superimpose a title for 5 seconds from the recording start point. When you play back the tape, the title is displayed for about 5 seconds from the point where you superimposed it. You can select one of eight preset titles and two custom titles (p. 95). You can
  • Sony DCR-IP7BT | Operating Instructions - Page 90
    Superimposing a title (6) If necessary, change the color, size, or position by selecting COLOR, SIZE, POS r or POS R, then press the center z on the control button repeatedly. (7) Select TITLE OK, then press the center z on the control button. (8) Select SAVE TITLE, then press the center z on the
  • Sony DCR-IP7BT | Operating Instructions - Page 91
    Editing Superimposing a title Title setting •The title color changes as follows: WHITE t YELLOW t VIOLET t RED t CYAN t GREEN t BLUE •The title size changes as follows: SMALL y LARGE You cannot input more than 12 characters in LARGE size. If you input more than 12 characters, the title size returns
  • Sony DCR-IP7BT | Operating Instructions - Page 92
    Select
  • Sony DCR-IP7BT | Operating Instructions - Page 93
    Editing Superimposing a title To use a custom title If you want to use a custom title, select in step 6 (p. 95). Notes •Thumbnails may not be displayed depending on the condition of the tape. This is not a malfunction. •Noise may appear on the thumbnails. However, this has no effect on the recorded
  • Sony DCR-IP7BT | Operating Instructions - Page 94
    Superimposing a title Erasing a title (1) Set the POWER switch to CAMERA or VCR. (2) Select FN, then press the center z on the control button. The PAGE1 screen appears. (3) Select MENU, then press the center z
  • Sony DCR-IP7BT | Operating Instructions - Page 95
    Making your own titles You can make up to two titles and store them in the memory of your camcorder. Each title can have up to 20 characters. Making a title in CAMERA mode (1) Set the POWER switch to CAMERA. (2) Select FN, then press the center z on the control button. The PAGE1 screen appears. (3)
  • Sony DCR-IP7BT | Operating Instructions - Page 96
    If you take 5 minutes or longer to enter characters in standby mode while a cassette is in your camcorder The power automatically goes off. The characters you have entered remain stored in memory. Set the POWER switch to OFF (CHG) once and then to CAMERA again, then complete your title. We recommend
  • Sony DCR-IP7BT | Operating Instructions - Page 97
    titles Making a title in VCR mode (1) Set the POWER switch to VCR. (2) Select FN, then press the 95. (7) Select SET, then press the center z on the control button. The title is stored in memory. 2 FN 3 TITLE END TITLE INPUT TITLE TITLE SET 4-6 TITLE SET CUSTOM1 SET CUSTOM2 SET RETURN TITLE
  • Sony DCR-IP7BT | Operating Instructions - Page 98
    The Micro Cassette Memory The MICROMV cassette automatically records the recording settings and date. You can also label a cassette. The label can consist of up to 16 characters and is stored in the Micro Cassette Memory. When you insert the labeled cassette and set the POWER switch to CAMERA or VCR
  • Sony DCR-IP7BT | Operating Instructions - Page 99
    The Micro Cassette Memory Labeling a cassette (1) Insert the cassette you want to label. (2) Set the POWER switch to CAMERA label. (8) Select SET, then press the center z on the control button. The label is stored in memory. (9) Press DISPLAY to turn off the menu. 3 4 9 FN MENU 5 CM SET T I
  • Sony DCR-IP7BT | Operating Instructions - Page 100
    menu settings. When " " is flashing Remove the cassette and insert it again. If the message is still displayed, the Micro Cassette Memory may be corrupted. Replace the cassette with another cassette. To erase the title Select C, then press the center z on the control button. The last character is
  • Sony DCR-IP7BT | Operating Instructions - Page 101
    You can delete all the data (cassette title, date, photo, thumbnail, and cassette information) in Micro Cassette Memory at once. (1) Set the POWER switch to CAMERA or VCR. (2) Select FN, then press the center z on the control button. The PAGE1 screen appears. (3) Select MENU, then press the center
  • Sony DCR-IP7BT | Operating Instructions - Page 102
    , see "Selecting the mode setting of each item" (p. 103). 2 MENU CAMERA MANUAL SET PROGRAM AE P EFFECT WHT BAL AUTO SHTR MEMORY MANUAL SET PROGRAM AE WHT BAL 1 FN VCR MANUAL SET P EFFECT (DCR-IP7BT only) 3 4 5 MANUAL SET PROGRAM AE P EFFECT OTHERS AREA SET DST SET BEEP COMMANDER DISPLAY REC
  • Sony DCR-IP7BT | Operating Instructions - Page 103
    : MANUAL SET CAMERA SET VCR SET LCD/VF SET MEMORY SET (DCR-IP7BT only MEMORY position of the POWER switch is only available for the DCR-IP7BT. Icon/item Mode PROGRAM AE -- P EFFECT -- WHT BAL -- AUTO SHTR z ON OFF D ZOOM z OFF 20× 120× 16:9WIDE z OFF ON Meaning To suit your specific
  • Sony DCR-IP7BT | Operating Instructions - Page 104
    image quality mode. MEMORY MEMORY VCR 104 * DCR-IP7BT only Notes on the camcorder prevents excessive compensation for camera-shake. Notes on VF B.L. When you select "BRIGHT," the battery life is reduced by about 10 percent during recording. When you use a power source other than the battery
  • Sony DCR-IP7BT | Operating Instructions - Page 105
    . To duplicate still images on the tape and save them onto the "Memory Stick" (p. 135). POWER switch MEMORY VCR MEMORY MEMORY MEMORY VCR * DCR-IP7BT only Notes on formatting (DCR-IP7BT only) •The "Memory Stick" supplied with your camcorder has been formatted at the factory. Formatting with your
  • Sony DCR-IP7BT | Operating Instructions - Page 106
    demonstration appear. To cancel the demonstration mode. POWER switch CAMERA VCR VCR CAMERA VCR CAMERA VCR CAMERA VCR CAMERA VCR CAMERA MEMORY CAMERA MEMORY VCR CAMERA Notes on DEMO MODE • You cannot select DEMO MODE when a cassette is inserted in your camcorder. • DEMO MODE is set to STBY (Standby
  • Sony DCR-IP7BT | Operating Instructions - Page 107
    activate the Remote Commander supplied with your camcorder. To deactivate the camcorder. To turn the camera recording lamp off so that the subject is not aware of your recording. POWER switch MEMORY VCR CAMERA MEMORY CAMERA MEMORY CAMERA MEMORY VCR CAMERA MEMORY VCR CAMERA MEMORY VCR CAMERA MEMORY
  • Sony DCR-IP7BT | Operating Instructions - Page 108
    data. •Image data may be damaged in the following cases: - If you remove the "Memory Stick," turn the power off or detach the battery for replacement when the access lamp is flashing. - If you use "Memory Stick"s near magnets or magnetic fields such as those of speakers and televisions. 108
  • Sony DCR-IP7BT | Operating Instructions - Page 109
    "Memory Stick" that is used with other equipment, format it with this camcorder (p. 105). However, formatting erases all information on the "Memory Stick." "Memory Stick" and are trademarks of Sony "" and "" are not mentioned in each case in this manual. "Memory Stick" Operations 109
  • Sony DCR-IP7BT | Operating Instructions - Page 110
    lamp is lit or flashing Do not shake or strike your camcorder because your camcorder is reading the data from the "Memory Stick" or recording data on the "Memory Stick." Do not turn the power off, eject the "Memory Stick" or remove the battery pack. Otherwise, the image data may be corrupted. If
  • Sony DCR-IP7BT | Operating Instructions - Page 111
    button. Refer to the relevant pages for each function. "Memory Stick" Operations 3-6 FN In memory camera mode PAGE1 PAGE2 PAGE3 EXIT MENU FOCUS SELF PLAY INDEX EXPO- TIMER SURE PAGE1 PAGE2 PAGE3 EXIT 1 CAMERA MEMORY/ NETWORK VCR POWER (CHG) OFF ON MODE LCD PLAY INDEX BRT PAGE1 PAGE2
  • Sony DCR-IP7BT | Operating Instructions - Page 112
    Using a "Memory Stick" - introduction To return to the FN screen Select EXIT, then press the center z , then press the center z on the control button to display the following buttons: In memory camera mode PAGE1 MENU, SELF TIMER, PLAY, INDEX, EXPOSURE, FOCUS PAGE2 LCD BRT, PLAY, INDEX PAGE3 VOL, PLAY
  • Sony DCR-IP7BT | Operating Instructions - Page 113
    "Memory Stick" Operations Using a "Memory Stick" - introduction Selecting the still image quality mode You can select the image quality mode for still image recording. The default setting is FINE. (1) Set the POWER switch to MEMORY. (2) Select FN, then press the center z on the control button. The
  • Sony DCR-IP7BT | Operating Instructions - Page 114
    image quality mode you select. The table below indicates the numbers when using a "Memory Stick" formatted with this camcorder. Quality 128 MB* 64 MB* FINE 1310 images 650 images STANDARD 1970 images 980 images "Memory Stick" 32 MB* 16 MB* 325 images 160 images 485 images 240 images 8 MB
  • Sony DCR-IP7BT | Operating Instructions - Page 115
    "Memory Stick" Operations Using a "Memory Stick" - introduction Setting the moving picture quality mode You can select the moving picture quality mode. The default setting is SUPER FINE. (1) Set the POWER switch to MEMORY. (2) Select FN, then press the center z on the control button. The PAGE1
  • Sony DCR-IP7BT | Operating Instructions - Page 116
    Using a "Memory Stick" - introduction Image quality settings Setting Meaning Frame rate SUPER FINE ( you intend to modify the pictures using your computer. SUPER FINE is the default setting of the camcorder. FINE: You can record moving pictures for a longer time than with the SUPER FINE mode,
  • Sony DCR-IP7BT | Operating Instructions - Page 117
    Approximate length of time of the moving pictures you can record on a "Memory Stick" The table below indicates the recordable time when using a "Memory Stick" formatted with this camcorder. Quality 128 MB* SUPER FINE 13 min FINE 20 min STANDARD 41 min LIGHTMODE 82 min * Optional
  • Sony DCR-IP7BT | Operating Instructions - Page 118
    images on a "Memory Stick" - Memory Photo recording - DCR-IP7BT only You can record still images on a "Memory Stick." You can also record nine still images continuously. (MULTI SCRN) Before operation Insert the "Memory Stick" into your camcorder. (1) Set the POWER switch to MEMORY. (2) Keep pressing
  • Sony DCR-IP7BT | Operating Instructions - Page 119
    Memory Stick" - Memory Photo recording When the POWER switch is set to MEMORY The following functions do not work: - Wide mode - Digital zoom - SteadyShot - Fader - Picture effect - Digital Memory Stick." To display the recording data, press DATA CODE on the Remote Commander. When using the camcorder
  • Sony DCR-IP7BT | Operating Instructions - Page 120
    still images on a "Memory Stick" - Memory Photo recording (1) Set the POWER switch to MEMORY. (2) Select FN, then MEMORY/ NETWORK VCR POWER (CHG) OFF ON MODE 4 MEMORY SET STILL SET MOVIE SET SLIDE SHOW DELETE ALL FORMAT RETURN 5 MEMORY SET STILL SET PIC MODE QUALITY RETURN SINGLE 6 MEMORY
  • Sony DCR-IP7BT | Operating Instructions - Page 121
    FN 4 5 PHOTO 3 SELF TIMER PAGE1 PAGE2 PAGE3 EXIT MENU FOCUS SELF PLAY INDEX EXPO- TIMER SURE 1 CAMERA MEMORY/ NETWORK VCR POWER (CHG) OFF ON MODE To record moving pictures on a "Memory Stick" with the selftimer Press START/STOP in step 5. To stop the recording, press START/STOP again. To
  • Sony DCR-IP7BT | Operating Instructions - Page 122
    Recording still images on a "Memory Stick" - Memory Photo recording Note The self-timer recording mode is automatically canceled when: - The self-timer recording is finished. - The POWER switch is set to OFF (CHG) or VCR. 122
  • Sony DCR-IP7BT | Operating Instructions - Page 123
    PHOTO FN FINE FN 2 1 CAMERA MEMORY/ NETWORK VCR POWER (CHG) OFF ON MODE "Memory Stick" Operations When the access lamp is lit or flashing Do not shake or strike the camcorder. Also, do not turn the power off , eject the "Memory Stick" or remove the battery pack. Otherwise, the image data may
  • Sony DCR-IP7BT | Operating Instructions - Page 124
    image with PHOTO. Recording date/time The date/time when it is recorded on the "Memory Stick" is recorded. Various settings are not recorded. When you press PHOTO on the Remote Commander Your camcorder immediately records the image that is on the screen when you press the button. Recording a still
  • Sony DCR-IP7BT | Operating Instructions - Page 125
    the VCR. This connection produces higher quality MICROMV format pictures. Using the i.LINK cable i.LINK (MICROMV) i.LINK (MICROMV) : Signal flow (supplied) Note " " flashes in the following instances. If this happens, eject and insert the "Memory Stick" again, and record distortion-free images
  • Sony DCR-IP7BT | Operating Instructions - Page 126
    moving pictures on a "Memory Stick" - MPEG movie recording - DCR-IP7BT only You can record moving pictures with sound on a "Memory Stick." Before operation Insert the "Memory Stick" into your camcorder. (1) Set the POWER switch to MEMORY. (2) Press START/STOP. Your camcorder starts recording. The
  • Sony DCR-IP7BT | Operating Instructions - Page 127
    Memory Stick" - MPEG movie recording Note Sound is recorded in monaural. When the POWER switch is set to MEMORY The following functions do not work: - Wide mode - Digital zoom - SteadyShot - Fader - Picture effect - Digital a "Memory Stick" Do not eject the cassette tape from your camcorder. While
  • Sony DCR-IP7BT | Operating Instructions - Page 128
    recording. Your camcorder starts recording. 3 START/STOP 4 0min N 0:15:42 STDREC 0:0 3 [ 1 5SEC ] BBB FN Recordable time on the "Memory Stick." This indicator is displayed for 5 seconds after pressing START/STOP. The indicator is not recorded. 2 1 CAMERA MEMORY/ NETWORK VCR POWER (CHG) OFF
  • Sony DCR-IP7BT | Operating Instructions - Page 129
    when recording from tapes. When the access lamp is lit or flashing Do not shake or strike the camcorder. Also, do not turn the power off, eject the "Memory Stick" or remove the battery pack. Otherwise, the image data may be corrupted. Titles already recorded on tapes You cannot record the titles
  • Sony DCR-IP7BT | Operating Instructions - Page 130
    connect the yellow (video) plug of the A/V connecting cable. Connect the S video plug to the S video jack of the VCR. This connection produces higher quality MICROMV format pictures. Using the i.LINK cable i.LINK (MICROMV) : Signal flow 130 i.LINK (MICROMV) (supplied)
  • Sony DCR-IP7BT | Operating Instructions - Page 131
    -free images. - When recording on a tape in a poor recording state, for example, on a tape that has been repeatedly used for dubbing. While recording on the "Memory Stick" Do not eject the cassette tape from your camcorder. While you are carrying out the eject operation, sound is not recorded on the
  • Sony DCR-IP7BT | Operating Instructions - Page 132
    Superimposing a still image in a "Memory Stick" on a moving picture - MEMORY MIX - DCR-IP7BT only You can superimpose a still image you have recorded on a "Memory Stick" on top of the moving picture you are recording. You can record the superimposed images on a tape. However, you cannot record
  • Sony DCR-IP7BT | Operating Instructions - Page 133
    recording into your camcorder. •Insert the "Memory Stick" with still images recorded into your camcorder. (1) Set the POWER switch to CAMERA. appears. (9) Press START/STOP to start recording. "Memory Stick" Operations 2 FN 9 1 CAMERA MEMORY/ NETWORK VCR POWER (CHG) OFF ON MODE 3 MEM M I X
  • Sony DCR-IP7BT | Operating Instructions - Page 134
    ) 100-0001~100-0018 - For C. CHROM: two images (such as a background) 100-0019~100-0020 Sample images Sample images stored in the "Memory Stick" supplied with your camcorder are protected (p. 149). Image data modified with a computer or shot with other equipment You may not be able to play them back
  • Sony DCR-IP7BT | Operating Instructions - Page 135
    - DCR-IP7BT only Using the search function, you can automatically take in only still images from tapes and record them on a "Memory Stick" in sequence. Before operation •Insert a recorded tape into your camcorder and rewind the tape. •Insert a "Memory Stick" into your camcorder. (1) Set the POWER
  • Sony DCR-IP7BT | Operating Instructions - Page 136
    lamp is lit or flashing Do not shake or strike your camcorder. Also, do not turn the power off, eject the "Memory Stick" or remove the battery pack. Otherwise, the image data may be corrupted. If the write-protect switch on the "Memory Stick" is set to LOCK "NOT READY" appears when you select the
  • Sony DCR-IP7BT | Operating Instructions - Page 137
    playback - DCR-IP7BT only You can play back still images recorded on a "Memory Stick." You can also play back six images (including moving pictures) in order at a time by selecting the index screen. Before operation Insert the "Memory Stick" into your camcorder. (1) Set the POWER switch to MEMORY or
  • Sony DCR-IP7BT | Operating Instructions - Page 138
    your camcorder to the TV with the A/V connecting cable supplied with your camcorder before the operation. •When operating memory photo camcorder. Still images You can also select still images from the PAGE1/PAGE2/PAGE3 screens by selecting -/+. When no images are recorded on the "Memory Stick
  • Sony DCR-IP7BT | Operating Instructions - Page 139
    especially useful when searching for a particular image. (1) Set the POWER switch to MEMORY or VCR. (2) In MEMORY mode, go to step 3. In VCR mode, select PB, This indicates the order in which images are recorded on the "Memory Stick." These numbers are different from the data file names (p. 108).
  • Sony DCR-IP7BT | Operating Instructions - Page 140
    - DCR-IP7BT only You can play back moving pictures recorded on a "Memory Stick." You can also play back six images, including still images, in order, at one time, by selecting the index screen. Before operation Insert the "Memory Stick" into your camcorder. (1) Set the POWER switch to MEMORY or
  • Sony DCR-IP7BT | Operating Instructions - Page 141
    be played back on other digital still cameras and digital video camera recorders. •Cannot be output from the i.LINK (MICROMV) jack. To play back recorded images on a TV screen •Connect your camcorder to a TV with the A/V connecting cable supplied with your camcorder before operation. •Turn the audio
  • Sony DCR-IP7BT | Operating Instructions - Page 142
    Viewing a moving picture - MPEG movie playback Screen indicators during moving picture playback MO V 1 0 0 0 1 MPEG N X VOL - 1 / 20 0:01 SCRN SIZE VOL + JUL 4 2001 12:05:56 - + CAM INDEX FN Data directory number/File number Picture number/Total number of recorded pictures Protect indicator
  • Sony DCR-IP7BT | Operating Instructions - Page 143
    tape - DCR-IP7BT only You can dub a still image or title recorded on a "Memory Stick" to a tape. You can also use the Remote Commander to do this operation. Before operation •Insert a tape to be recorded into your camcorder. •Insert a "Memory Stick" into your camcorder. (1) Set the POWER switch to
  • Sony DCR-IP7BT | Operating Instructions - Page 144
    on the "Memory Stick" onto the tape To stop dubbing Select , then press the center z on the control button, or press the stop button on the Remote Commander. When using the Remote Commander Press the REC buttons on the Remote Commander simultaneously after step 3. The camcorder starts dubbing
  • Sony DCR-IP7BT | Operating Instructions - Page 145
    Operations Enlarging still images recorded on a "Memory Stick" - Memory PB ZOOM - DCR-IP7BT only You can enlarge still images recorded on a "Memory Stick." Before operation Insert the "Memory Stick" into your camcorder. (1) In memory playback mode, select FN, then press the center z on the control
  • Sony DCR-IP7BT | Operating Instructions - Page 146
    Note You cannot record images on the "Memory Stick" which are enlarged by the Memory PB ZOOM function. Record those images on the VCR using your camcorder as a player. Pictures in the Memory PB ZOOM mode Pictures are not output through the i.LINK (MICROMV) jack. In Memory PB ZOOM mode If you press
  • Sony DCR-IP7BT | Operating Instructions - Page 147
    - DCR-IP7BT only You can automatically play back images in sequence. This function is useful especially when checking recorded images or during a presentation. Before operation Insert the "Memory Stick" with your images recorded into your camcorder. (1) Set the POWER switch to MEMORY. (2) Select
  • Sony DCR-IP7BT | Operating Instructions - Page 148
    desired image by selecting -/+ before step 5. To view the recorded images on the TV screen Connect your camcorder to a TV with the A/V connecting cable supplied with your camcorder before operation. If you change the "Memory Stick" during operation The slide show does not operate. If you change the
  • Sony DCR-IP7BT | Operating Instructions - Page 149
    DCR-IP7BT only To prevent accidental erasure of important images, you can protect selected images. Before operation Insert the "Memory Stick" into your camcorder. (1) Set the POWER switch to MEMORY or VCR. (2) In MEMORY . "Memory Stick" Operations 3 INDEX 1 CAMERA MEMORY/ NETWORK VCR POWER (CHG
  • Sony DCR-IP7BT | Operating Instructions - Page 150
    DCR-IP7BT only You can delete images stored in a "Memory Stick." You can delete all images or selected images. Deleting selected images Before operation Insert the "Memory Stick" into your camcorder. (1) Set the POWER switch to MEMORY or VCR. (2) In MEMORY 1 CAMERA MEMORY/ NETWORK VCR POWER (CHG)
  • Sony DCR-IP7BT | Operating Instructions - Page 151
    Before operation Insert the "Memory Stick" into your camcorder. (1) Set the POWER switch to MEMORY or VCR. (2) In MEMORY mode, go to . After the erasing is completed, the index screen appears. 3 INDEX 1 CAMERA MEMORY/ NETWORK VCR POWER (CHG) OFF ON MODE 4-6 DEL -MARK MARK DEL EXIT 1 2 3
  • Sony DCR-IP7BT | Operating Instructions - Page 152
    control button in step 8. Deleting all the images You can delete all the unprotected images in a "Memory Stick." Before operation Insert the "Memory Stick" into your camcorder. (1) Set the POWER switch to MEMORY. (2) Select FN, then press the center z on the control button. The PAGE1 screen appears
  • Sony DCR-IP7BT | Operating Instructions - Page 153
    off the menu. 8 "Memory Stick" Operations 6 MEMORY SET STILL SET MOVIE SET SLIDE SHOW DELETE ALL FORMAT RETURN RETURN OK MEMORY SET STILL SET MOVIE on the control button. To cancel deleting all the images in the "Memory Stick" Select RETURN in step 5 or 6, then press the center z on the control
  • Sony DCR-IP7BT | Operating Instructions - Page 154
    printing out still images later. Your camcorder conforms with the DPOF (Digital Print Order Format) standard for specifying the still images to print out. Before operation Insert the "Memory Stick" into your camcorder. (1) Set the POWER switch to MEMORY or VCR. (2) In MEMORY mode, go to step 3. In
  • Sony DCR-IP7BT | Operating Instructions - Page 155
    application software MovieShaker Ver. 3.1 for MICROMV. Before installing the i.LINK driver and the application software into your computer, be sure not to connect the camcorder to the computer. For details on installing and on an i.LINK connection, refer to the operating instructions supplied with
  • Sony DCR-IP7BT | Operating Instructions - Page 156
    Memory Stick" using your computer - DCR-IP7BT only You can view data recorded on a "Memory Stick" using your computer. Note Data recorded on a "Memory Stick" is stored in the following formats. Make sure that applications that support type CD-ROM drive •iBook or Power Mac G4 with the Mac OS 8.6
  • Sony DCR-IP7BT | Operating Instructions - Page 157
    -screen messages to install the USB driver. (5) Connect the USB jack on your camcorder to the USB connector on your computer using the supplied USB cable. (6) Insert a "Memory Stick" into your camcorder, connect the AC power adaptor and set the POWER switch to MEMORY. USB MODE appears on the screen
  • Sony DCR-IP7BT | Operating Instructions - Page 158
    the incorrect USB driver 1 Turn on the power and allow Windows to load. 2 Connect the USB jack on your computer to the USB jack on your camcorder using the USB cable supplied with your camcorder. 3 Insert a "Memory Stick" into your camcorder, connect the AC power adapter, and set the POWER switch to
  • Sony DCR-IP7BT | Operating Instructions - Page 159
    USB cable to the USB jack on the camcorder and the other end to the USB connector on your computer. (3) Insert a "Memory Stick" into your camcorder, and connect the AC power adaptor to your camcorder and then to a wall outlet. (4) Set the POWER switch to MEMORY. USB MODE appears on the screen of the
  • Sony DCR-IP7BT | Operating Instructions - Page 160
    connected. •Do not optimize the "Memory Stick" on a Windows machine. This will shorten the "Memory Stick" life. •Do not compress the data on the "Memory Stick." Compressed files cannot be played back on your camcorder. Software •Depending on your application software, the file size may increase when
  • Sony DCR-IP7BT | Operating Instructions - Page 161
    Viewing images recorded on a "Memory Stick" using your computer Image file storage destinations and image files Image files recorded with your camcorder are grouped in folders by recording mode. The meanings of the file names are as follows. ssss stands for any number within the range from
  • Sony DCR-IP7BT | Operating Instructions - Page 162
    instructions supplied with the camcorder. (1) Set the POWER switch to MEMORY/NETWORK. (2) Select NETWORK, then press the center z on the control button. The Network Menu appears and the (Bluetooth) lamp turns on. BROWSER MENU 2 1 CAMERA MEMORY/ NETWORK VCR POWER (CHG) OFF ON MODE NETWORK
  • Sony DCR-IP7BT | Operating Instructions - Page 163
    network Note on trademarks •The BLUETOOTH trademarks are owned by their proprietor and used by Sony manual. When using the network function Hold the camcorder with both hands as illustrated below. Note Be careful not to touch the V BATT lever while you are operating the camcorder. The battery
  • Sony DCR-IP7BT | Operating Instructions - Page 164
    trouble and their solutions If you run into any problem using your camcorder, use the following table to troubleshoot the problem. If the problem persists, disconnect the power source and contact your Sony not suitable for autofocus. c Adjust to focus manually (p. 65). The picture does not appear
  • Sony DCR-IP7BT | Operating Instructions - Page 165
    /or Corrective Actions • The battery pack is not installed, or is dead or nearly dead. c Install a charged battery pack (p. 18, 19). • The AC power adaptor is not connected to a wall outlet. c Connect the AC power adaptor to a wall outlet (p. 21). Troubleshooting (continued on the following page
  • Sony DCR-IP7BT | Operating Instructions - Page 166
    be recharged. c Replace it with a new battery pack (p. 18). • The battery is not fully charged. c Use a charged battery pack (p. 19). • A deviation has occurred in the remaining battery time. c Charge the battery pack fully again (p. 19). The power goes off although the battery remaining indicator
  • Sony DCR-IP7BT | Operating Instructions - Page 167
    trouble and their solutions When operating using a "Memory Stick" - DCR-IP7BT only Symptom Cause and/or Corrective Actions The "Memory Stick" does not function. • The POWER switch is not set to MEMORY. c Set it to MEMORY (p. 118). • The "Memory Stick" is not inserted. c Insert a "Memory Stick
  • Sony DCR-IP7BT | Operating Instructions - Page 168
    Types of trouble and their solutions When operating using a "Memory Stick" - DCR-IP7BT only Symptom The photo save function does not work. You cannot play back images in actual size. No audio during playback. Cause and/or Corrective Actions • The write-protect switch on the "Memory Stick" is set
  • Sony DCR-IP7BT | Operating Instructions - Page 169
    the AC power adaptor from a wall outlet or remove the battery, then reconnect it in about 1 minute. Turn the power on. If the functions still do not work, press the reset button using a sharp-pointed object. (If you press the reset button, all the settings (DCR-IP7BT: except the NETWORK mode
  • Sony DCR-IP7BT | Operating Instructions - Page 170
    Disconnect the power cord of the AC adaptor or remove the battery pack. After reconnecting the power source, operate your camcorder. • A malfunction that you cannot service has occurred. c If the same code appears again after you remove and attach the power source, contact your Sony dealer or local
  • Sony DCR-IP7BT | Operating Instructions - Page 171
    : •The battery is dead (p. 18). % Moisture condensation has occurred* Fast flashing: •Eject the cassette, turn off your camcorder, and leave it for about 1 hour with the cassette compartment open (p. 179). Warning indicator as to "Memory Stick" (DCR-IP7BT only)* Slow flashing: •No "Memory Stick" is
  • Sony DCR-IP7BT | Operating Instructions - Page 172
    a cassette tape.2) • DELETING You pressed the PHOTO button on your camcorder while deleting data in a "Memory Stick." 2) 3) • FORMATTING You pressed the PHOTO button on your camcorder while formatting a "Memory Stick." 2) 3) • Q Z CLEANING END The cleaning is complete. Eject the cleaning
  • Sony DCR-IP7BT | Operating Instructions - Page 173
    Micro Cassette Memory. , , and are trademarks of Sony Corporation. Copyright signal When you play back Using any other video camera recorder, you cannot record on a tape that has recorded copyright control signals for copyright protection of software which is played back on your camcorder. When
  • Sony DCR-IP7BT | Operating Instructions - Page 174
    to operating conditions between your camcorder and an optional AC adaptor/charger. The "InfoLITHIUM" battery pack calculates the power consumption according to the operating conditions of your camcorder, and displays the remaining battery time in minutes. Charging the battery pack •Be sure to charge
  • Sony DCR-IP7BT | Operating Instructions - Page 175
    then using the battery pack fully on your camcorder. This is to maintain the battery pack's functions. •To use the battery pack fully on your camcorder, turn on your camcorder and leave it as it is without a cassette inserted. Battery life •The battery life is limited. Battery capacity drops little
  • Sony DCR-IP7BT | Operating Instructions - Page 176
    baud rate of the camcorder is "S400." i.LINK's maximum baud rate varies according to the equipment. Three maximum baud rates are defined: S100 (approx. 100 Mbps*) S200 (approx. 200 Mbps) S400 (approx. 400 Mbps) The baud rate is listed under "Specifications" in the instruction manual of each piece of
  • Sony DCR-IP7BT | Operating Instructions - Page 177
    computer, make sure that application software supported by this unit is already installed on your computer. For details on precautions when connecting this unit, also refer to the instruction manuals for the equipment to be connected. Required i.LINK Cable Use the Sony i.LINK 4-pin-to-4-pin cable
  • Sony DCR-IP7BT | Operating Instructions - Page 178
    refer to the separate network function operating instructions (DCR-IP7BT only). You can use your camcorder in any country or area with the AC adaptor supplied with your camcorder within 100 V to 240 V AC, 50/60 Hz. When charging the battery pack, use a commercially available AC plug adaptor [a], if
  • Sony DCR-IP7BT | Operating Instructions - Page 179
    , on the surface of the tape, or on the lens. In this condition, the tape may stick to the head drum and be damaged or your camcorder may not operate correctly. If there is moisture inside your camcorder, the beep sounds and the % indicator flashes. When the Z indicator flashes at the same time
  • Sony DCR-IP7BT | Operating Instructions - Page 180
    , the video head may have worn out. In such cases, you must replace the video head. For details, consult your nearest Sony dealer. Notes •When cleaning the video head, do not use any equipment other than the cleaning cassette. •The cleaning cassette does not work in MEMORY mode (DCR-IP7BT only).
  • Sony DCR-IP7BT | Operating Instructions - Page 181
    , starting from 3, attach the eyecup. Then replace the screws in the direction of the arrow battery Your camcorder is supplied with a built-in rechargeable battery installed so as to retain the date and time, etc., regardless of the setting of the POWER switch. The built-in rechargeable battery
  • Sony DCR-IP7BT | Operating Instructions - Page 182
    Camcorder operation •Operate your camcorder on 7.2 V (battery pack) or 8.4 V (AC power adaptor). •For DC or AC operation, use the accessories recommended in this operating instructions. •If any solid object or liquid gets inside the casing, unplug your camcorder and have it checked by a Sony
  • Sony DCR-IP7BT | Operating Instructions - Page 183
    Maintenance information and precautions AC power adaptor •Unplug the unit from a wall outlet when you are not using the unit for a long time. To disconnect the power cord, pull it out by the plug. Never pull the power cord itself. •Do not operate the unit with a damaged cord or if the unit has been
  • Sony DCR-IP7BT | Operating Instructions - Page 184
    carefully before replacing the batteries. •If you touch the liquid with your hands, wash it off with water. •If the liquid gets into your eyes, wash your eyes with a lot of water and then consult a doctor. If any problem occurs, unplug your camcorder and contact your nearest Sony dealer. 184
  • Sony DCR-IP7BT | Operating Instructions - Page 185
    ) Wireless communication (DCR-IP7BT only) Communication system Bluetooth specification Ver. 1.1 Maximum communication speed 1) 2) Approx. 723 kbps Maximum output Bluetooth specification Power Class2 Communication distance 2) Approx. 10 m (33 feet) (Open space, when using a Sony BTANW1 Modem Adaptor
  • Sony DCR-IP7BT | Operating Instructions - Page 186
    Stick" (DCR-IP7BT only) Memory Flash memory 8 MB: MSA-8A Operating voltage 2.7-3.6V Power consumption Approx. 45 mA in the operating mode Approx. 130 µA in the standby mode Dimensions (approx.) 50 × 2.8 × 21.5 mm (2 × 1/8 × 7/8 in.) (w/h/d) Mass (approx.) 4 g (0.14 oz) Design and specifications
  • Sony DCR-IP7BT | Operating Instructions - Page 187
    162) (DCR-IP7BT only) 3 LCD screen (p. 30) 4 Viewfinder lens adjustment lever (p. 33) 5 OPEN/ZEJECT lever (p. 27) 6 LCD BACKLIGHT switch (p. 32) 7 Lens cap (p. 29) 8 Speaker 9 POWER switch (p. 29) 0 Cassette lid (p. 27) This mark indicates that this product is a genuine accessory for Sony video
  • Sony DCR-IP7BT | Operating Instructions - Page 188
    Identifying the parts and controls qa qh qs qj qk qd ql qf qg qa DISPLAY button (p. 41) qs Control button (v/V/b/B/z) (p. 7) qd CAMERA lamp qf MEMORY/NETWORK lamp (DCR-IP7BT only) qg VCR lamp qh BACK LIGHT button (p. 36) qj Built-in Microphone (p. 29) qk Viewfinder (p. 33) ql Eyecup 188
  • Sony DCR-IP7BT | Operating Instructions - Page 189
    recording lamp (p. 29) wk (Bluetooth) lamp (p. 162) (DCR-IP7BT only) wl Remote sensor e; A/V (ID-2) jack (p. 45, 81, 85, 124, 130) ea i.LINK (MICROMV) jack (p. 82, 87, 125, 130) The i.LINK (MICROMV) jack is i.LINK compatible. Note on the Carl Zeiss lens Your camcorder is equipped with a Carl Zeiss
  • Sony DCR-IP7BT | Operating Instructions - Page 190
    and controls es ej ed ek ef el eg r; eh es MEMORY EJECT lever (p. 110) (DCR-IP7BT only) ed Access lamp (p. 110) (DCR-IP7BT only) ef "Memory Stick" slot (p. 110) (DCR-IP7BT only) eg CHG lamp (p. 19) eh Reset button (p. 169) ej Battery/Battery terminal cover (p. 18) ek Jack cover el VBATT
  • Sony DCR-IP7BT | Operating Instructions - Page 191
    button (p. 41) 3 MEMORY control buttons (DCR-IP7BT only) 4 SEARCH MODE button (p. 75 to 79) 5 MULTI SRCH button (p. 71) 6 Transmitter Point toward the remote sensor to control your camcorder after turning on your camcorder. 7 DATA CODE button (p. 41) 8 START/STOP button (p. 29) 9 Power zoom button
  • Sony DCR-IP7BT | Operating Instructions - Page 192
    two size AA (R6) batteries by matching the + and - polarities on the batteries to the + - marks inside the battery compartment. Notes on the and 3 are used to distinguish your camcorder from other Sony VCRs to avoid remote control misoperation. If you use another Sony VCR in Commander mode VTR 2, we
  • Sony DCR-IP7BT | Operating Instructions - Page 193
    w; 9 wa 0 qa qs 1 Micro Cassette Memory indicator (p. 173) 2 Remaining battery time indicator (p. 35) 3 Zoom indicator (p. 34)/Data file name indicator (p. 108) (DCR-IP7BT only) 4 Digital effect indicator (p. 56)/ MEMORY MIX indicator (p. 132) (DCRIP7BT only)/FADER indicator (p. 51) 5 16:9WIDE
  • Sony DCR-IP7BT | Operating Instructions - Page 194
    " battery ...... 174 JPEG 108 Labeling a cassette 99 LUMINANCEKEY 56 M, N Manual focus 65 Memory chromakey 132 Memory luminancekey ........ 132 MEMORY MIX 132 Memory overlap 132 Memory PB ZOOM 145 "Memory Stick 108 Menu settings 102 Micro Cassette Memory ......... 98 MICROMV format
  • Sony DCR-IP7BT | Operating Instructions - Page 195
  • Sony DCR-IP7BT | Operating Instructions - Page 196
    Sony Corporation Printed in Japan 306993312
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
3-069-933-
12
(1)
©2001 Sony Corporation
Operating Instructions
Before operating the unit, please read this manual thoroughly, and retain
it for future reference.
Owner’s Record
The model and serial numbers are located on the bottom. Record the
serial number in the space provided below. Refer to these numbers
whenever you call upon your Sony dealer regarding this product.
DCR-IP5/IP7BT
Digital
Video Camera
Recorder
Model No.
Model No.
AC-
Serial No.
Serial No.