Sony DCR-SX65 Handycam® Handbook - Page 88

Table of contents Useful recording techniques Notes on using the "Memory Stick Micro" media  To use "Memory Stick Micro" media with your camcorder, you need a Duo-sized M2 adaptor. Insert the "Memory Stick Micro" media into the Duo-sized M2 adaptor, and then insert the adaptor into the "Memory Stick Duo" media slot. If you insert a "Memory Stick Micro" media into your camcorder without using the Duosized M2 adaptor, you might not be able to remove it from your camcorder.  Do not leave the "Memory Stick Micro" media within the reach of small children. They might accidentally swallow it. About the "InfoLITHIUM" battery pack Your camcorder operates only with an "InfoLITHIUM" V series battery packs. "InfoLITHIUM" V series battery packs have the mark. What is an "InfoLITHIUM" battery pack?  An "InfoLITHIUM" battery pack is a lithium-ion battery pack that has functions for communicating information related to operating conditions between your camcorder and an AC Adaptor/charger (sold separately).  The "InfoLITHIUM" battery pack calculates the power consumption according to the operating conditions of your camcorder, and displays the remaining battery time in minutes. To charge the battery pack  Be sure to charge the battery pack before you start using your camcorder.  We recommend charging the battery pack in an ambient temperature of between 10 C to 30 C (50 °F to 86 °F) until the CHG (charge) lamp turns off. If you charge the battery pack outside of this temperature range, you may not be able to charge it efficiently. To use the battery pack effectively  Battery pack performance decreases when the ambient temperature is 10 C (50 °F) or below, and the length of time you can use the battery pack becomes shorter. In that case, do one of the following to use the battery pack for a longer time.  Put the battery pack in a pocket to warm it up, and install it on your camcorder right before you start taking shots.  Use a large capacity battery pack: NP-FV70/ NP-FV100 (sold separately).  Frequent use of the LCD screen or a frequent playback, fast forward or reverse operation wears out the battery pack faster. We recommend using a large capacity battery pack: NP-FV70/NP-FV100 (sold separately).  Be sure to close the LCD screen when not recording or playing back on your camcorder. The battery pack is also consumed when your camcorder is in recording standby or playback pause.  Have spare battery packs ready for 2 times or 3 times the expected recording time, and make trial recordings before making the actual recording.  Do not expose the battery pack to water. The battery pack is not water resistant. About the remaining battery time indicator  When the power goes off even though the remaining battery time indicator indicates that the battery pack has enough power to operate, charge the battery pack fully again. Remaining battery time will be indicated correctly. Note, however, that the battery indication will not be restored if it is used in high temperatures for a long time, or if left in a fully charged state, or when the battery pack is frequently used. Use the remaining battery time indication as a rough guide only.  The  mark that indicates low battery flashes even if there are still 20 minutes of battery time remaining, depending on the operating conditions or ambient temperature. About storage of the battery pack  If the battery pack is not used for a long time, fully charge the battery pack and use it up on your camcorder once a year to maintain proper function. To store the battery pack, remove it from your camcorder and put it in a dry, cool place.  To discharge the battery pack on your camcorder completely, touch (MENU) Index US 88