Sony DCR-TRV460 Camera Operations Guide - Page 18
Step 4: Adjusting the LCD panel and viewfinder, Adjusting the LCD panel, Adjusting the viewfinder
UPC - 027242643116
View all Sony DCR-TRV460 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Step 4: Adjusting the LCD panel and viewfinder Adjusting the LCD panel You can adjust the angle and brightness of the LCD panel to meet various recording situations. Even when there are obstructions between you and the subject, you can check the subject on the LCD screen during recording by adjusting the angle of the LCD panel. [MENU], (STANDARD SET) menu, then touch [LCD SET] (p. 78). 3 Adjust the item with / , then touch . z Tips • If you rotate the LCD panel 180 degrees to the lens side, you can close the LCD panel with the LCD screen facing out. • If you are using the battery pack for power source, you can adjust the brightness by selecting [LCD BL LEVEL] from the [LCD SET] on the (STANDARD SET) menu (p. 78). • Even if you adjust the LCD screen backlight, the recorded picture will not be affected. • You can turn off the operation confirmation beep by setting [BEEP] in the (STANDARD SET) menu to [OFF] (p. 81). Adjusting the viewfinder Maximum 180 degrees You can view images using the viewfinder when you close the LCD panel. Use the viewfinder when the battery is running out, or when the screen is hard to see. Maximum 90 degrees Press OPEN and open the LCD panel. Open the LCD panel 90 degrees to the camcorder, then rotate it to the desired position. To adjust the brightness of the LCD screen 1 Touch . 2 Touch [LCD BRIGHT]. If the item is not displayed on the screen, touch / . If you cannot find it, touch Viewfinder lens adjustment lever 1 Lift up the viewfinder. 2 Adjust the viewfinder lens adjustment lever until the picture is clear. 18 Getting started