Sony DCR-TRV460 Camera Operations Guide - Page 19
Step 5: Setting the date and time
UPC - 027242643116
View all Sony DCR-TRV460 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
To use the viewfinder during operation When you are recording on a tape or a "Memory Stick", you can adjust the exposure (p. 35) and fader (p. 40) while checking the image on the viewfinder. Have the LCD panel rotated 180 degrees and closed with the screen facing out. 1 Set the power mode to CAMERA-TAPE or CAMERA-MEMORY (p. 17). 2 Close the LCD panel with the screen facing out. appears on the screen. 3 Touch . [Set LCD off?] appears on the screen. 4 Touch [YES]. The LCD screen is turned off. 5 Touch the LCD screen while checking the display in the viewfinder. [EXPOSURE], etc. are displayed. 6 Touch the button you want to set. • [EXPOSURE]: Adjust with / and touch . • [FADER]: Touch it repeatedly to select a desired effect (only in the CAMERA- TAPE mode). • : The LCD screen lights up. To hide the buttons on the LCD screen, touch . To use the large-capacity battery pack When you use the large-capacity battery pack (NP-QM71/QM71D/QM91/QM91D) on your camcorder, extend the viewfinder and pull it up to the optimal angle for viewing. Step 5: Setting the date and time Set the date and time when using this camcorder for the first time. If you do not set the date and time, the [CLOCK SET] screen appears every time you turn on your camcorder. b Note • If you do not use your camcorder for about 3 months, the built-in rechargeable button-type battery gets discharged and the date and time settings may be cleared from the memory. In that case, charge the rechargeable button-type battery (p. 123) and then set the date and time again. OPEN POWER switch 1 Turn on your camcorder (p. 17). 2 Press OPEN and open the LCD panel. Proceed to step 7 when you set the clock for the first time. 3 Touch . 60min MENU 1/3 FADER SPOT METER -:--:-- EXPO- SURE SPOT FOCUS PRGRAM AE ,continued Getting started 19 Getting started