Sony DCR-TRV460 Camera Operations Guide - Page 45

Recording To cancel the operation Touch [CANCEL]. b Notes • The END SEARCH function will not work correctly when there is a blank section between recorded sections on the tape. • For DCR-TRV460: The END SEARCH function does not work for the tapes recorded on other devices in the Hi8 / standard 8 mm system. z Tip • You can do this operation also by selecting [END SEARCH] in the menu setting. When PLAY/EDIT mode is selected, you can do this operation by selecting [END SEARCH] short-cut on . (p. 59) Searching manually - EDIT SEARCH Reviewing the most recently recorded scenes - Rec review You can view a few seconds of the scene recorded just before you stopped the tape. 1 Slide the POWER switch repeatedly to select the CAMERA-TAPE mode. 2 Touch . 60min STBY 0:00:00 EDIT You can search for the start point while viewing the pictures on the screen. The sound is not played back during the search. 1 Slide the POWER switch to select the CAMERA-TAPE mode. 2 Touch . 60min STBY 0:00:00 3 Touch once. The last few seconds of the most recently recorded scene are played back. Then, your camcorder is set to the standby mode. b Note • For DCR-TRV460: The Rec review function does not work for the tapes recorded on other devices in the Hi8 /standard 8 mm system. EDIT 3 Keep touching (to go backward)/ (to go forward) and release it at the point where you want the recording to start. b Note • For DCR-TRV460: The EDIT SEARCH function does not work for the tapes recorded on other devices in the Hi8 / standard 8 mm system. Recording 45