Sony DEV5 Digital Recording Binoculars Handbook - Page 14

Table of Contents Menu Lists To use a wall outlet (wall socket) as a power source Make the same connections as "Step 2: Charging the battery pack" (p. 11). Even if the battery pack is installed, the battery pack is not discharged. To remove the battery pack  Set the POWER switch to OFF (CHG).  Open the battery cover (p. 11).  Slide the battery release lever and remove the battery.  The CHG (charge) lamp flashes during charging under the following conditions:  The battery pack is not installed correctly.  The battery pack is damaged.  The temperature of the battery pack is low. Remove the battery pack from this product and put it in a warm place.  The temperature of the battery pack is high. Remove the battery pack from this product and put it in a cool place. Notes on the AC Adaptor  Use the nearby wall outlet (wall socket) when using the AC Adaptor. Disconnect the AC Adaptor from the wall outlet (wall socket) immediately if any malfunction occurs while using this product.  Do not use the AC Adaptor placed in a narrow space, such as between a wall and furniture.  Do not short-circuit the DC plug of the AC Adaptor or battery terminal with any metallic objects. This may cause a malfunction. Battery release lever Charging the battery pack abroad You can charge the battery pack in any countries/regions using the AC Adaptor (supplied with DEV-3/5) or the AC Adaptor/ Charger (supplied with DEV-5K) within the AC 100 V - 240 V, 50 Hz/60 Hz range.  Notes  Do not use an electronic voltage transformer. Notes on the battery pack  When you remove the battery pack or disconnect the AC Adaptor, turn this product off and make sure that the (Movie)/ (Photo) lamps (p. 22), the access lamp (p. 19) are turned off. Index GB 14