Sony DEV5 Digital Recording Binoculars Handbook - Page 33
Movie recording, Photo recording, Items you can control with the, MANUAL dial
View all Sony DEV5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Table of Contents Menu Lists Items you can control with the MANUAL dial Movie recording [3D Depth Adjustment] [Focus] ... p. 57 [Exposure] ... p. 57 [AE Shift] ... p. 58 [White Balance Shift] ... p. 58 Photo recording [Focus] ... p. 57 [Exposure] ... p. 57 [IRIS] ... p. 58 [Shutter Speed] ... p. 58 [AE Shift] ... p. 58 [White Balance Shift] ... p. 58 To assign the menu item to the MANUAL dial Press and hold MANUAL down for a few seconds. The [Dial Setting] screen appears. Rotate the MANUAL dial and select the item to be assigned. Press MANUAL. Notes Manual settings will be retained even if you change the assigned item of the MANUAL dial. However, if you set [Exposure] after setting [AE Shift] manually, [Exposure] will override [AE Shift]. If you set either one of [Exposure], [IRIS], or [Shutter Speed], the settings of other 2 items are canceled. If you select [RESET] in step , all the items adjusted manually are reset to the default settings. Tips If you select at the right of the screen while setting [3D Depth Adjustment], the manual setting of [3D Depth Adjustment] is canceled. In the case of items other than [3D Depth Adjustment], pressing MANUAL switches between automatic and manual settings. You can also assign menu items to the MANUAL dial by selecting (MENU) [Camera/Mic] [ ( Camera Settings)] [Dial Setting]. Even if you open the IRIS wider (a smaller F-stop) than F3.4 when you set the zoom lever to the W (Wide angle) side, the IRIS is reset to F3.4 as you move the zoom lever to the T (Telephoto) side. If you adjust the IRIS, the in-focus range in front of and behind the focused subject is changed. When you open the IRIS wider (a smaller F-stop), the in-focus range becomes narrower, and when you close the IRIS narrower (a larger F-stop), the in-focus range becomes wider. You can set the IRIS to a preferred value depending on the shooting scenes. When you record images under a fluorescent lamp, sodium lamp, or mercury lamp, horizontal stripes may appear, flicker may occur, or color may change. In this case, change the shutter speed according to the power supply frequency in your region. The camera data (p. 66) that appears on the screen will differ, depending on the recording settings of this product. The settings will be displayed with the following icons. : Automatic : Exposure is set manually. Index GB 33