Sony DSC F828 Operating Instructions - Page 128
Others, work, no operations can
UPC - 027242634237
View all Sony DSC F828 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 128 highlights
Symptom You cannot print images. Printing is canceled. You cannot insert the date or print images in the index mode is printed on the date-inserted part. Cause • The camera does not connect to the printer. • The printer is not turned on. • Movies and images recorded in RAW mode cannot be printed. • Images modified with a computer or images shot using other than this camera may not be able to be printed. • You disconnected the USB cable before the (Not disconnect USB cable) mark disappears. • You switched the /CF switch while printing. • The printer does not provide these functions. • The date may not be inserted in the index mode depending on the printer. • The recording date data is not recorded on the image. Solution p Check that the camera and the printer are properly connected using the USB cable. p Turn on the printer. For further information, refer to the operating instructions supplied with it. - - - - p Consult with the printer manufacturer whether the printer provides these function or not. p Consult with the printer manufacturer. p The images that do not have the recording date data cannot be printed with the date inserted. Set [Date] to [Off] and print it. Others Symptom The camera does not work, no operations can be performed. The power is on, but the camera does not work. 128 Cause • You are not using an "InfoLITHIUM" battery pack. • The battery level is low or zero (The indicator appears.). • The AC Adaptor is not connected securely. • The internal system is not working properly. Solution p Use an "InfoLITHIUM" battery pack (page 146). p Charge the battery pack (page 14). p Connect it securely to the DC IN jack of the camera and to a wall outlet (wall socket) (page 17). p Remove, and then, after one minute, reinstall the battery pack and turn on the camera. If this does not work, press the RESET button located inside the battery/"Memory Stick" cover with a pointed object, then turn the power on again. (This will clear the date and time settings, etc.)