Sony DSC F828 Operating Instructions - Page 15
To remove the battery pack, Battery remaining indicators, Charging time, Connect the power cord mains - display
UPC - 027242634237
View all Sony DSC F828 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Getting started 2 To a wall outlet (wall socket) Power cord (mains lead) 1 4 , Connect the power cord (mains lead) to the AC Adaptor and then to a wall outlet (wall socket). During charging, the battery mark in the display window flashes, and after charging is completed, "Full" appears. The available shooting time is indicated - [LCD Backlight] or [EVF Backlight] is set to [Normal] - Using a "Memory Stick" - Not using the NightShot or NightFraming function. • After charging the battery pack, disconnect the AC Adaptor from the DC IN jack of your camera and the wall outlet (wall socket). To remove the battery pack Battery eject lever Open the battery/"Memory Stick" cover. Slide the battery eject lever in the direction of the arrow, and remove the battery pack. • Be careful not to drop the battery pack when removing it. Battery remaining indicators The battery remaining indicators on the screen or on the display window show the remaining shooting or viewing time. 80min LCD screen/Finder Display window • The battery remaining time on the screen or on the display window may not be correct under certain circumstances or conditions. • When you switch the FINDER/LCD switch or /CF switch, it takes about one minute for the correct battery remaining time to appear. Charging time Approximate time to charge a completely discharged battery pack using the AC Adaptor at a temperature of 25°C (77°F). Battery pack Charging time (min.) NP-FM50 (supplied) Approx. 150 • The available shooting time on the display window is calculated as if the camera were used under the following conditions: - The mode dial is set to 15