Sony DSC F828 Operating Instructions - Page 17
Using the AC Adaptor, Using your camera abroad, Connect the power cord mains - connection cord
UPC - 027242634237
View all Sony DSC F828 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
Getting started Using the AC Adaptor Jack cover DC plug 2 To a wall outlet (wall socket) Power cord (mains lead) 1 1 AC Adaptor , Open the jack cover, then connect the AC Adaptor (supplied) to the DC IN jack of the camera. Open the jack cover in the arrow direction as illustrated above. Connect the plug with the v mark facing up. • Connect the AC Adaptor to an easily accessible wall outlet (wall socket) close by. If any trouble occurs while using the adaptor, immediately shut off the power by disconnecting the plug from the wall outlet (wall socket). 2 , Connect the power cord (mains lead) to the AC Adaptor and to a wall outlet (wall socket). • When you have finished using the AC Adaptor, disconnect it from the DC IN jack of the camera and the wall outlet (wall socket). • The set is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet (wall socket), even if the unit itself has been turned off. Using your camera abroad Power sources You can use your camera in any country or region with the supplied AC Adaptor within 100 V to 240 V AC, 50/60 Hz. Use a commercially available AC plug adaptor [a], if necessary, depending on the design of the wall outlet (wall socket) [b]. AC-L15A/L15B • Do not use an electrical transformer (travel converter), as this may cause a malfunction. 17