Sony DSC F828 Operating Instructions - Page 64

d Select [BRK] (Bracket Step) with b/B, then select the desired bracket step value with v/V. ±1.0EV: Shifts the exposure value by plus or minus 1.0EV. ±0.7EV: Shifts the exposure value by plus or minus 0.7EV. ±0.3EV: Shifts the exposure value by plus or minus 0.3EV. e Shoot the image. To return to normal mode In Step 2, select [Normal]. • When [Mode] (REC Mode) is not set to [Normal], you cannot use the Exposure Bracket mode. • You may not be able to use the Exposure Bracket mode depending on the Scene Selection mode (page 37). • You cannot use the flash in this mode. • During shooting in this mode, the images are not displayed on the screen. Compose the image before pressing the shutter button. • The focus and white balance are adjusted for the first image, and these settings are also used for the other images. • When the exposure is manually adjusted (page 59), the exposure is shifted based on the adjusted brightness. • The recording interval is approximately 0.42 second. 64 • If the subject is too bright or too dark, you may be unable to shoot properly with the selected bracket step value. • You cannot select shutter speeds of 1/25 second or slower. Selecting the ISO sensitivity - ISO Mode dial: P/S/A/M You can change the camera's sensitivity to light. When you select a high-number setting, you can shoot in a dark place. Normally, the ISO sensitivity is set to [Auto]. When set to [Auto], the ISO sensitivity is automatically increased in a dark place. Multi-selector (v/V/b/B) MENU Mode dial a Set the mode dial to P, S, A or M. b Press MENU. The menu appears.