Sony DSC F828 Operating Instructions - Page 78
NightFraming, Night framing with
UPC - 027242634237
View all Sony DSC F828 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 78 highlights
- If you perform any invalid operation, the indicator flashes, and the "Night shot" indicator lights for about five seconds. • While using the NightShot function, you cannot use the following functions: - AE LOCK - Shooting with hologram AF - Shooting with the flash - Selecting the color reproduction mode - Adjusting the saturation, contrast, and sharpness • When [Pop-up Flash] is set to [Manual] in the SET UP settings, pop up the flash emitter using the OPEN (FLASH) switch. • When attaching the supplied lens hood, infrared ray may be blocked. • Do not use the NightShot function in bright places (e.g. outdoors in the daytime). This may cause your camera to malfunction. 78 NightFraming The NightFraming function enables you to check a subject even at night and then record with natural colors using the flash. a Set the mode dial to or P. b Press and hold NIGHTSHOT/ NIGHTFRAMING and select (Night framing) with the command dial. The flash emitter pops up and the and "Night framing" indicators light for about five seconds. 80min 8M 101 4 "Night framing" MAF c Press and hold the shutter button halfway down. The focus is automatically adjusted. d Press the shutter button fully down. The shutter sounds, the flash strobes and the image is recorded. To cancel the NightFraming function In Step 2, select [Off]. • While using the NightFraming function: - The white balance is set to Auto. - The metering mode is set to multi-pattern metering. - The AF range finder frame is not displayed. The centrally-located subject has priority to focus on. - The AE lock cannot be used. - If you perform any invalid operation while using the NightFraming function, the indicator flashes and the "Night framing" indicator lights for about five seconds. • When [Pop-up Flash] is set to [Manual] in the SET UP settings, pop up the flash emitter using the OPEN (FLASH) switch. • When attaching the supplied lens hood, flash light and infrared ray may be blocked. • When you press the shutter button halfway down, you will hear a sound, but this is not the sound of the shutter releasing. The image is not recorded yet. • When [Hologram AF] is set to [Off], you may not get a clear focus. Setting [Hologram AF] to [Auto] is recommended (page 35). • When using the following functions, you cannot use the NightFraming function. - Manual focus - Exposure Bracket - Burst - Multi Burst