Sony DSC F828 Operating Instructions - Page 89

Protecting images - Protect Mode dial: To prevent accidental erasure of an important image, you can protect it. Multi-selector (v/V/b/B) MENU Mode dial / • Note that formatting the recording medium erases all the data in the recording medium even if images are protected, and these images cannot be recovered. • It may take some time to protect the images. On the single screen a Set the mode dial to . b Display the image you want to protect with b/B. c Press MENU. The menu appears. d Select - (Protect) with b/B, then press the center of the multi-selector. The image currently being displayed is now protected, and the - (Protect) mark is indicated on the screen. 80min VGA 101 2/9 Protect Exit BACK/NEXT e To protect other images, display the image you want to protect with b/B, then press the center of the multiselector. To cancel the protection In Step 4 or 5, press the center of the multi-selector again. The - mark disappears. Still image editing On the Index screen a Set the mode dial to , press / (index) to switch to the Index screen. b Press MENU. The menu appears. c Select - (Protect) with b/B, then press the center of the multi-selector. d Select [Select] with b/B, then press the center of the multiselector. e Select the image you want to protect with v/V/b/B, then press the center of the multiselector. The green - (Protect) mark is indicated on the selected image. SELECT MENU TONEXT f To protect other images, repeat Step 5. 89 Still image editing