Sony DVP SR200P Operating Instructions - Page 31
kHz/96kHz PCM DVD VIDEO only, Settings and Adjustments
UPC - 027242752665
View all Sony DVP SR200P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
◆ DTS Selects whether or not to output DTS signals. OFF ON Select this when the player is connected to an audio component without a built-in DTS decoder. Select this when the player is connected to an audio component with a built-in DTS decoder. • When you play a DVD VIDEO with DTS sound tracks, set "DTS" to "ON" in "AUDIO SETUP" (page 31). • If you connect the player to audio equipment without a DTS decoder, do not set "DTS" to "ON" in "AUDIO SETUP" (page 31). A loud noise may come out from the speakers, affecting your ears or causing the speakers to be damaged. ◆ 48kHz/96kHz PCM (DVD VIDEO only) Selects the sampling frequency of the audio signal. 48kHz/16bit The audio signals of DVD VIDEOs are always converted to 48kHz/16bit. 96kHz/24bit All types of signals including 96kHz/24bit are output in their original format. However, if the signal is encrypted for copyright protection purposes, the signal is only output as 48kHz/16bit. b The analog audio signals from the AUDIO OUT L/R jacks are not affected by this setting and keep their original sampling frequency level. Settings and Adjustments 31US