Sony FCBEX48CP User Manual (FCB-EX480C_EX48C_Technical Manual)
Sony FCBEX48CP Manual
View all Sony FCBEX48CP manuals
Add to My Manuals
Save this manual to your list of manuals |
Sony FCBEX48CP manual content summary:
- Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 1
A-C4J-100-11 (1) Color Camera Module Technical Manual FCB-EX480C/EX480CP FCB-EX48C/EX48CP 2005 Sony Corporation - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 2
Switch Circuitry 31 Key Function Specifications 32 Initial Settings, Custom Preset and Backup 34 Mode Condition 36 Command List 39 VISCA/RS-232C Commands 39 FCB Camera Commands 45 Specifications 59 2 - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 3
× optical zoom. • Supports external synchronization (V-lock). • Adopts a newly developed DSP for improved picture quality when using the digital zoom or the slow camera to be effective in day/night environments (FCBEX480C/EX480CP only). • VISCA is a communications protocol, which enables the camera - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 4
application software may damage hardware, the application program or the camera. Sony Corporation is not liable for any damages under these conditions. Operation Start the camera control software on your computer after you turn on the camera and the image is displayed. Other Do not apply excessive - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 5
Controls FCB-EX480C/EX480CP Main Unit Front Left side 4 5 6 1 Rear Bottom 2 3 1 Lens 2 CN991 connector 7 3 CN992 connector 4 CN601 connector (for key SW) 5 TELE button 6 WIDE button 7 Tripod screw holes When a tripod is used, please use 10 mm (13/32 in.) screws to attach it to the camera - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 6
FCB-EX48C/EX48CP Main Unit Front Left side 1 Rear Bottom Locations of Controls 4 5 6 2 3 1 Lens 2 CN991 connector 7 3 CN992 connector 4 CN601 holes When a tripod is used, please use 10 mm (13/32 in.) screws to attach it to the camera. Also, please be sure to attach the tripod securely. 6 - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 7
the power is on. • Address set VISCA is a protocol, which normally can support a daisy chain of up to seven attached devices. However, the FCB camera does not support camera connections in a daisy chain. Therefore, whenever a camera is connected for the first time, be sure to use the address set to - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 8
FCB camera employs an 18× optical zoom lens combined with a digital supports a Combined Mode and a Separate Mode. Combined Mode This is the previously existing zoom method. After the optical zoom has reached its maximum level, the camera switches to Digital Then, it returns to Manual Focus mode. AF - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 9
conditions and occupying more than 1/2 of the image, is submitted to the camera. One Push White Balance data is lost when the power is turned off. If the power is turned off, reset the One Push White Balance. • Manual WB Manual control of R and B gain, 256 steps each Automatic Exposure Mode The - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 10
Basic Functions AE - Manual The shutter speed (22 steps), iris (18 steps) and gain (16 when bright. As both gain and iris are fixed, this mode is used when exposing at a fixed camera sensitivity. When switching from Full Auto or Shutter Priority Mode to Bright Mode, the current status will be - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 11
Shutter Manual" is the factory setting. ICR (IR Cut-Removable) Mode (FCB-EX480C/EX480CP only) An infrared (IR) Cut-Filter can be disengaged from the image path for increased sensitivity in low light environments. The ICR will automatically engage depending on the ambient light, allowing the camera - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 12
red colors are taken. Auto ICR is available in AE-full-auto state only. Camera ID The ID can be set up to 65,536 (0000 to FFFF). As this adjusting the following items each time: • Zoom Position • Digital Zoom On/Off • Focus Auto/Manual • Focus Position • AE Mode • Shutter control parameters • - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 13
as a basic oscillator. NTSC=28.636363MHz PAL=28.375MHz • External Synchronization (V-Lock Synchronization) When a TTL level V-Lock pulse is input, the camera synchronizes to the input signal (V-lock synchronization). The frequency of the input signal synchronizes to within ±1Hz of the external - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 14
Functions Privacy Zone Function Privacy Zone masking protects private objects and areas such as house windows, entrances, and exits which are within the camera's range of vision but not subject to surveillance. Privacy zone masking can be masked on the monitor to protect privacy. Features • Mask - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 15
Basic Functions Privacy Zone Setting Command List Command Set Command CAM_PrivacyZone SetMask Display Command Packet 8x 01 04 76 mm nn 0r 0r 0s 0s FF 8x 01 04 77 pp pp pp pp FF SetMaskColor 8x 01 04 78 pp pp pp pp qq rr FF SetPanTiltAngle 8x 01 04 79 0p 0p 0p 0q 0q 0q FF SetPTZMask 8x 01 - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 16
Basic Functions Parameters mm: Mask setting list Mask Name mm (Hex) Mask_A 00h Mask_B 01h Mask_C 02h Mask_D 03h Mask_E 04h Mask_F 05h Mask_G 06h Mask_H 07h Mask_I 08h Mask_J 09h Mask_K 0Ah Mask_L 0Bh Mask Name Mask_M Mask_N Mask_O Mask_P Mask_Q Mask_R Mask_S Mask_T Mask_U - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 17
Pan/Tilt angle is 0.088 degrees. Note When you set the pan/tilt angle, locate the pan/tilt position at the center point of the FCB camera's position. Non Interlock Mask Command: 8x 01 04 6F mm 0p 0p 0q 0q 0r 0r 0s 0s FF Parameters: mm Setting Mask See "mm - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 18
(20(10)) 14hex (20(10)) Alarm Function This function instructs the camera to detect movement within the monitoring area and then send an alarm signal automatically. A High level signal is output when camera detects movement inside the monitoring area. A Low level signal is output - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 19
ALARM Setting Command List Command Set CAM _ Alarm Command On Off Set Mode Set Day Night Level Command Packet 8x 01 04 6B 02 FF 8x 01 04 6B 03 FF 8x 01 04 6C pp FF 8x 01 04 6D 0p 0p 0p 0q 0q 0q FF Basic Functions Comments Alarm start Alarm stop Mode Setting *Select one from 13 modes ppp: Day - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 20
Flowchart of 12 Modes Function Mode "00" Set the Focus Position Hysteresis. Alarm On AE moves Basic Functions Set to the factory preset Focus Position into memory Focus moves outside of the hysteresis. High level signal output Focus goes back to the previous position. * * Repeat this loop until - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 21
Mode "01" Alarm On AE moves. Basic Functions Focus Position into memory Hysteresis is set to the factory preset. Focus moves outside of the hysteresis. * High level signal output * Repeat this loop until Alarm off. AE does not move for a period of time. AE does not move for a period of time. - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 22
Mode "02" Basic Functions Set the AE level Hysteresis. Alarm On AE moves AE moves outside of the hysteresis. High level signal output AE goes back to the previous level. Set to the factory preset AE Level into memory * * Repeat this loop until Alarm off. Low level signal output Bright AE Level - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 23
Mode "03" Alarm On AE moves. AE moves outside of the hysteresis. High level signal output * * Repeat this loop until Alarm off. AE does not move for a period of time. Low level signal output Update the AE level data Basic Functions AE level into memory Hysteresis is set to the factory preset. - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 24
Details of Mode "01"/"03" Basic Functions Alarm ON T1: Reset interval timer (5sec) T2: Detect timer (2sec) T3: High level signal count timer (2sec) Hysteresis Focus Pos AE Level Reset Reset Reset Reset T1 T1 T1 T2 T3 Low Signal level High Low T1: T2: T3: 24 - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 25
Mode "04" High output result of mode "00" Basic Functions Mode "05" High output result of mode "02" High output High output result of mode "00" Low output High output result of mode "03" High output Low output 25 - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 26
Mode "06" High output result of mode "01" Basic Functions Mode "07" High output result of mode "02" High output Low output High output result of mode "01" High output result of mode "03" High output Low output 26 - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 27
Mode "08" High output result of mode "00" Basic Functions High output result of mode "02" High output result of mode "02" Mode "09" High output High output High output Low output High output result of mode "00" High output result of mode "03" High output result of mode "03" High output - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 28
Mode "0A" High output result of mode "01" Basic Functions High output result of mode "02" High output result of mode "02" Mode "0B" High output High output High output Low output High output result of mode "01" High output result of mode "03" High output result of mode "03" High output - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 29
Day-Night Mode (Mode "0C") Basic Functions Set the Day-Night Mode and the Day/ Night AE level. Setting by the VISCA Cmd. Alarm On Starting distinction between Day and Night. AE move Yes Brightness is higher than No Day AE level Yes Low level signal output Brightness is higher than Night - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 30
base using M2 screws. • Perform the random vibration test under the following conditions in the X, Y and Z directions for 20 minutes in each direction. • The camera vibration specification is to have no malfunction after this test. Power spectrum density 5 to 50 Hz 4.14 m2/s3 {0.043 G2/Hz} 50 to - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 31
R117 1500 AUTO WB ONE PUSH WB ATW S134 R126 2200 S141 R133 3900 S145 R137 8200 INDOOR OUTDOOR MANUAL WB S151 R144 27k S154 R147 27k APERTRE UP APERTRE DOWN S106 S117 R104 1200 S125 R113 1500 S138 S144 S147 a) The CN101 is connected to the CN601 on the FCB camera main unit. 31 - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 32
in INDOOR mode. Request Indoor mode. Indoor indication OUTDOOR Enable WB at 5800K in OUTDOOR mode. Request Outdoor mode. Outdoor indication MANUAL WB Switch to Manual WB mode. Enable R control when pressed once and enable B control when pressed 2nd time. Switchable with UP/DOWN key. Switch - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 33
and confirm with Exec. UP Data UP key (priority for AE mode, Bright, Request UP. manual WB, title, and clock) DOWN Data DOWN key (priority for AE mode, Bright, Request DOWN. manual WB, title, and clock) POS1 Recall preset position 1. Request recall. POS2 Recall preset position 2. Request - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 34
even when the camera is powered OFF. A circle "a" in this column signifies that the data is preserved. A cross "×" signifies that the data IS NOT preserved. Mode/Position Zoom Position D-Zoom On/Off D-Zoom Separate/Combine D-Zoom Position Focus Position Focus Auto/Manual Near Limit Setting - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 35
Color Setting Alarm On/Off Alarm Mode Alarm Detect Level E-Flip On/Off Privacy Zone On/Off Privacy Zone Setting Key Lock On/Off Camera ID External Lock Mode V-Phase V-Phase Phase Inversion Initial settings Off - - Off - Off - - Off Off - Off 0000h Internal Vsync edge position No inversion Note - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 36
D-Zoom Direct Focus Far/Near/Stop Focus Direct Focus Auto/Manual One Push AF Focus Infinity Focus Near Limit AF Sensitivity Normal /Low AF Mode Norm/Interval/Zoom AF Activation Time/Interval Setting Camera Memory Set/Reset Camera Memory Recall Lens Initialization Comp Scan a) × during recalling from - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 37
Priority Iris Priority Bright Shutter Setting Iris Setting Gain Setting Bright Setting Slow Shutter Auto/Manual Exposure Compensation On/Off Exposure Compensation Setting Backlight On/Off SpotAE On/Off SpotAE Setting Power Off Initializing Power On a a a a a a a a a a a a a a a Freeze - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 38
Others Mode Aperture Setting LR_Reverse On/Off Freeze On/Off Picture Effect Setting ICR On/Off Auto ICR On/Off Display On/Off Mute On/Off Title Setting Privacy Zone On/Off/Clear Privacy Zone Setting Key Lock On/Off ID Write Power Off Initializing Power On a a a a a a a a a a a a a Freeze On - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 39
Manual outlines an RS-232C control protocol and command list for certain Sony cameras from which control software can be developed. THIS CONTROL PROTOCOL AND COMMAND LIST IS PROVIDED BY SONY an FCB camera is called the peripheral device. In VISCA, up to seven peripheral devices like the FCB camera - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 40
5 Bit 4 Bit 3 Bit 2 Bit 1 Bit 0 (MSB) (LSB) Command and Inquiry ● Command Sends operational commands to the FCB camera. ● Inquiry Used for inquiring about the current state of the FCB camera. Command Packet Note Inquiry 8X QQ RR ... FF QQ1) = Command/Inquiry, RR2) = category code 1) QQ = 01 - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 41
buffer full X0 6Y 04 FF Command cancelled X0 6Y 05 FF No socket (to be cancelled) X0 6Y 41 FF Command not executable X = 9 to F: FCB camera address + 8, Y = socket number Command Execution Cancel To cancel a command which has already been sent, send the Cancel command as the next command. To cancel - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 42
Y0 50 GG GG (0020: Sony) KK FF Description GGGG = Vender ID HHHH = Model ID 0434 = FCB-EX480C 0435 = FCB-EX480CP 0436 = FCB-EX48C 0437 = FCB-EX48CP JJJJ = ROM revision KK = Maximum socket # (02) X = 1 to 7: FCB camera address (For inquiry packet) X = 9 to F: FCB camera address +8 (For reply packet - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 43
(Completion) Comments Returns ACK when a command has been accepted, and Completion when a command has been executed. Accepted a command which is not supported or a command lacking parameters. There are two commands currently being executed, and the command could not be accepted. Could not execute - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 44
VISCA Camera-Issued Messages ACK/Completion Messages Command List ACK Completion z = Device address + be executed due to current conditions. For example, when commands controlling the focus manually are received during auto focus. Network Change Message Network Change Command Message z0 38 - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 45
FCB Camera Far(Variable) Near(Variable) Direct Auto Focus Manual Focus Auto/Manual One Push Trigger Infinity Near Limit Normal Low OFF p=0 (Low) to 7 (High) pqrs: Zoom Position Digital zoom ON/OFF Optical/Digital Zoom Combined Optical/Digital Zoom Separate p=0 (Low) to 7 (High) x1/MAX Magnification - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 46
Indoor mode Outdoor mode One Push WB mode Auto Tracing White Balance Manual Control mode One Push WB Trigger Manual Control of R Gain pq: R Gain Manual Control of B Gain pq: B Gain Automatic Exposure mode Manual Control mode Shutter Priority Automatic Exposure mode Iris Priority Automatic Exposure - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 47
CAM_Display On Off On/Off CAM_Title Title Set1 Title Set2 Title Set3 CAM_Mute Title Clear On Off On Off On/Off a) Some models do not support Infrared Mode. Command List Command Packet 8x 01 04 02 00 FF 8x 01 04 02 02 FF 8x 01 04 02 03 FF 8x - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 48
mm: Non-Interlock Mask Settings pp: X, qq: Y, rr: W, ss: H Grid Display On Grid/Center Line Display Off Center Line Display On Camera Control Enable/Disable pqrs: Camera ID (=0000 to FFFF) Internal mode Line Lock mode p=step (1-7) Restore Factory Settings pq: V-Phase (00-FF) No Phase Turnover Phase - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 49
0p 0q FF Command List Comments On Off pqrs: Zoom Position D-Zoom On D-Zoom Off Combine Mode Separate Mode pq: D-Zoom Position Auto Focus Manual Focus pqrs: Focus Position pqrs: Focus Near Limit Position AF Sensitivity Normal AF Sensitivity Low Normal AF Interval AF Zoom Trigger AF pq: Movement Time - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 50
, 1: ON) ppp: Pan qqq: Tilt mm: Mask Settings ppp: Pan qqq: Tilt rrrr: Zoom pp pp pp pp: Mask is displayed now Off On pqrs: Camera ID Internal Mode Line Lock Mode 0 degree 180 degree pq: V-Phase Position mnpq: Model Code (04xx) rstu: ROM version vw: Socket Number (=02) On Off - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 51
Normal 1: Interval 3 2: Zoom Trigger 2 AF Sensitivity 0: Slow 1: Normal 1 Digital Zoom 1:On 0:Off 0 Focus Mode 0:Manual 1:Auto 7 0 6 0 5 0 4 0 3 Low Contrast Detection 1: Yes 0: No 2 Camera Memory Recall 1: Executing 0: Stopped 1 Focus Command 1: Executing 0: Stopped 0 Zoom Command - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 52
Command List Camera Control System Inquiry Commands ......... Command Packet 8x 09 7E 7E 01 FF Byte 0 Bit Comments 7 6 Destination Address 5 4 3 2 Source Address 1 0 7 0 Off 1 Exposure Comp. 1:On 0:Off 0 Slow Shutter 1:Auto 0:Manual 7 0 6 0 5 0 4 3 2 Shutter Position 1 - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 53
Effect Mode 1 0 Byte Bit 7 6 5 4 6 3 2 1 0 7 6 5 4 7 3 2 1 0 7 6 5 4 8 3 2 1 0 7 6 5 4 9 3 2 1 0 7 6 5 4 10 3 2 1 0 7 6 5 4 11 3 2 1 0 Comments 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 Camera ID (HH) 0 0 0 0 Camera ID (HL) 0 0 0 0 Camera ID (LH) 0 0 0 0 Camera ID (LL) Byte 12 13 14 15 Bit - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 54
7 6 Destination Address 5 4 3 2 Source Address 1 0 7 0 Completion Message (50h) 6 1 5 0 4 1 3 0 2 0 1 0 0 0 7 0 6 0 5 0 4 0 3 2 Digital Zoom Position (H) 1 0 7 0 6 0 5 0 4 0 3 2 Digital Zoom Position (L) 1 0 7 0 6 0 5 0 4 0 3 2 AF Activation Time - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 55
VISCA Command Setting Values Exposure Control (1/2) Gain NTSC PAL Shutter Speed 15 10000 10000 14 6000 6000 13 4000 3500 12 3000 2500 11 2000 1750 10 1500 1250 0F 1000 1000 0E 725 600 0D 500 425 0C 350 300 0B 250 215 0A 180 150 09 125 120 08 100 100 07 - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 56
Exposure Control (2/2) Bright 1F 1E 1D 1C 1B 1A 19 18 17 16 15 14 13 12 11 10 0F 0E 0D 0C 0B 0A 09 08 07 06 05 04 03 02 01 00 Exposure Comp. 0E 0D 0C 0B 0A 09 08 07 06 05 04 03 02 01 00 IRIS F1.4 F1.4 F1.4 F1.4 F1.4 F1.4 F1.4 F1.4 F1.4 F1.4 F1.4 F1.4 - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 57
×17 ×18 Optical Zoom Position Data 0000 1606 2151 2860 2CB5 3060 32D3 3545 3727 38A9 3A42 3B4B 3C85 3D75 3E4E 3EF7 3FA0 4000 Digital Zoom Combine mode Digital Zoom Ratio ×1 ×2 ×3 ×4 ×5 ×6 ×7 ×8 ×9 ×10 ×11 ×12 Digital Zoom Position Data 4000 6000 6A80 7000 7340 7540 76C0 7800 7900 7980 7A40 7AC0 - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 58
m 6000: 1 m 7000: 80 cm 8000: 29 cm 9000: 10 cm A000: 4.7 cm B000: 2.3 cm C000: 1.0 cm a) PAL to 4000 to 7AC0 (77C0) a) Optical Tele end Digital Tele end to C000 Near end As the distance on the left will differ due to temperature characteristics, etc., use as approximate values. * The lower - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 59
TELE 2.1 s Optical WIDE/Digital TELE 3.7 s Digital WIDE/Digital TELE 1.7 s ∞ to Near 0.5 s Digital zoom 12× (216× with FCB-EX480C: 1/1 to /1 10,000 s (22 steps) FCB-EX480CP: 1/1 to /1 10,000 s (22 steps) White balance AUTO, ATW, Indoor, Outdoor, One Push WB, Manual WB Gain Auto/Manual - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 60
Dimensions (FCB-EX480C/EX480CP) Front 52 (21/8) 50 (131/32) (27(11/8)) 25 (31/32) 2-M2 Within a depth of 3 mm (1/8 in.) or less form the side 14±0.1 (9/16) 1/4-20UNC (Tripod screw for camera) Within a depth of 7 mm (9/32 in.) or less form the bottom surface Back 27±0.1 (11/16) 16±0.1 (5/8) - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 61
Pin assignment CN991 1234 CN992 987654321 CN991 JST S4B-ZR-SM3A-TF Pin No. Name 1 Y_Out 2 GND (for Y signal) 3 C_Out 4 GND (for C signal) Specifications Level 9 8 7 6 5 4 3 2 1 CN992 KYOCERA ELCO 00 6200 097 032 800 Pin No. Name Level 1 RxD CMOS 5V (low: max 0.8V, high: min 2.0V) - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 62
2.1 s Optical WIDE/Digital TELE 3.7 s Digital WIDE/Digital TELE 1.7 s ∞ to Near 0.5 s Specifications Digital zoom 12× (216 FCB-EX48C: 1/1 to /1 10,000 s (22 steps) FCB-EX48CP: 1/1 to /1 10,000 s (22 steps) White balance AUTO, ATW, Indoor, Outdoor, One Push WB, Manual WB Gain Auto/Manual - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 63
Dimensions (FCB-EX48C/EX48CP) Front 50(131/32) 25 (31/32) (25 (31/32)) 2-M2 Within a depth of 3 mm (1/8 in.) or less form the side 14±0.1 (9/16) 1/4-20UNC (Tripod screw for camera) Within a depth of 7 mm (9/32 in.) or less form the bottom surface Back 27±0.1 (11/16) 16±0.1 (5/8) 36 - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 64
Pin assignment CN991 1234 CN992 987654321 CN991 JST S4B-ZR-SM3A-TF Pin No. Name 1 Y_Out 2 GND (for Y signal) 3 C_Out 4 GND (for C signal) Specifications Level 9 8 7 6 5 4 3 2 1 CN992 KYOCERA ELCO 00 6200 097 032 800 Pin No. Name 1 RxD 2 TxD 3 GND (for RxD&TxD) 4 DC IN 5 GND (for DC IN - Sony FCBEX48CP | User Manual (FCB-EX480C_EX48C_Technical Manual) - Page 65
KEY AD7 11 NC 12 STROBE Specifications Level Differences Between FCB-EX480C/EX480CP and FCB-EX48C/EX48CP The main differences between the FCB-EX480C/ EX480CP and FCB-EX48C/EX48CP are as follows. Function/Item FCB-EX480C/EX480CP FCB-EX48C/EX48CP Auto ICR function Yes No ICR function Yes
2005 Sony Corporation
Color Camera Module
FCB-EX480C/EX480CP
FCB-EX48C/EX48CP
A-C4J-100-
11
(1)
Technical Manual