Sony FWD-32LX1R Operating Instructions - Page 13

Caution Provide an ample amount of space around the display • When you use the display, make sure there is more space around the display than that shown in the figure below. This will allow for proper ventilation. • The ambient temperature must be 0 °C to +35 °C (32 °F to 95 °F). • When installing the display horizontally, use the display stand SU-42FW/32FW (not supplied) as a stand. • Regarding the installation of hardware such as brackets, screws, or bolts, we cannot specify the products. Actual installation is up to the authorized local dealers. Consult with qualified Sony personnel for installation. • While the unit is on, a certain amount of heat builds up inside. This can cause burns. Avoid touching the top or rear of the unit when it is powered on or just after it has entered standby mode. When using the stand (not supplied) Front 20 (7 7/8) 10 10 (4) (4) Side 10 (4) Caution When mounting the display horizontally Front 25 (9 7/8) 10 10 (4) (4) Side 25 (9 7/8) 5 (2) Units: cm (inches) When mounting the display vertically Front 20 (7 7/8) 25 (9 7/8) Side 10 (4) 25 (9 7/8) Make sure that the 1POWER switch is at the lower right. 5 (2) Units: cm (inches) Units: cm (inches) Note When mounting the display vertically, you cannot use the speakers SS-SP40FW/32FW (not supplied). 13 (GB)