Sony FWD-32LX1R Operating Instructions - Page 15
Cable management - fwd32lx1rs
View all Sony FWD-32LX1R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Cable management The display has the cable covers on its back. Before connecting the cables to the display, pull the cable covers to open. After connecting the cables to the display, close the cable covers. Connections Cable cover Cable cover (bottom) Using the cable holders You can bundle the cables with the supplied cable holders (×6 for the FWD-40LX1 and ×4 for the FWD32LX1R). Choose three successive blank parts of the air vents for the cable holder on the FWD-40LX1. Choose six out of eight holes on the FWD-32LX1R. Attach the cable holders in the illustration below. When you connect the speakers SS-SP40FW (not supplied), route the speaker cords through the speaker cord holders on the rear of the display unit. (Only for the FWD-40LX1) FWD-32LX1R Cable holder Inset the cable holder into the hole on the unit and rotate it about 90 degrees. 1 Rear FWD-40LX1 Cable holder Press the hinge part to open the hooking nails. 2 Speaker cord holder (Only for the FWD40LX1) 3 Insert the cable holder into the slits. 1 2 15 (GB)