Sony FWD-32LX1R Operating Instructions - Page 19
Initial Setup/information
View all Sony FWD-32LX1R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Illumination Switches the brightness of the "SONY" logo on the front of the display unit. Remote This menu is used for remote control settings. Index Number Sets the index number of the display. Note When you set the index number, use the buttons on the display unit. The index number cannot be set with the Remote Commander. For details on the Index Number, see "Operating a Specific Display With the Remote Commander" on page 42 (GB). Control Mode Selects the function of the Remote Commander. Display + Remote: Activates a remote commander supplied with the display. Display Unit Only: Disables the remote control function. You can only make settings for the display using the control buttons on the display unit. Remote Only: Disables the controls on the display unit when you want to control it using the Remote Commander only. You can only make settings for the display using the Remote Commander. Note When operating this item, the modes you can select differ depending on the key you are using. When using ENTER on the Remote Commander for setting, you can select only "Display + Remote" or "Remote Only." When using ENTER on the display unit for setting, you can select only "Display + Remote" or "Display Unit Only." Using On-screen Menus INITIAL SETUP/INFORMATION menu You can select the on-screen language or the input signal, or set the Security Lock option. INITIAL SETUP/INFORMATION Language: Color System: Auto Shut Off: Security Lock: Information All Reset IP Address Setup Speed Setup English Auto Off Off Select Set ENTER Exit MENU Note "IP Address Setup" and "Speed Setup" appear on the menu only when an option adaptor with a communication function such as BKM-FW32 or BKM-FW50 is installed into the OPTION1 slot. Language Selects the on-screen language (Japanese, English, German, French, Spanish, or Italian). For details, see "Selecting the On-screen Language" on page 36 (GB). Color System Selects the Color System of video signals. Auto: to set the Color System automatically. NTSC: to display NTSC signals NTSC4.43: to display NTSC4.43 signals PAL: to display PAL signals SECAM: to display SECAM signals PAL-M: to display PAL-M signals PAL-N: to display PAL-N signals PAL60: to display PAL60 signals Auto Shut Off When you set this item to "On," the display unit automatically enters the standby mode when a signal is not input to the COMPONENT or DVI input connectors for more than about five minutes. While in the standby mode, press the 1POWER switch on the display unit or the POWER ON button on the Remote Commander to switch the display unit on. The display unit automatically enters the power saving mode when a signal is not input to the DVI or RGB input connectors for more than about thirty seconds. While in the power saving mode, the display unit is automatically turned on when a signal is input. 19 (GB)