Sony FWD-32LX1R Operating Instructions - Page 39

Setting the Security Lock / Setting an IP address and communication speed 3 Enter the password again for re-confirmation. Re-enter new password key. Setting an IP address and communication speed Be sure to remember this password. Use : MENU ENTER Cancel : Other key The setting is finished when the following message appears. INITIAL SETUP/INFORMATION Language: Color System: Auto Shut Off: Security Lock: Information All Reset English Auto Off On Security Lock enabled! Select Set ENTER Exit MENU If "Invalid password!" appears on the menu screen, start the procedure again from Step 1. INITIAL SETUP/INFORMATION Language: Color System: Auto Shut Off: Security Lock: Information All Reset English Auto Off Off When an optional adaptor with communication function such as BKM-FW32 or BKM-FW50 is installed into the OPTION1 slot in the display unit, set an IP address and communication speed to control the display unit via the network. Note Setting of an IP address and a communication speed is completed by selecting "Execute" and pressing ENTER. When the setting is completed properly, "Done" will be displayed. When the setting is not completed properly, an error code will be displayed. In such a situation, confirm the setting values and set up again. Obtaining an IP address automatically (DHCP) Invalid password! Select Set ENTER Exit MENU 4 After completing the process described above, turn off the display unit and unplug the power cord to make the setting valid. The Security Lock becomes activated and the dialog box prompting you to enter the password appears when you turn on the display unit next time. Security authentication Enter the password that is set for the display unit when the dialog box prompting you to enter the password appears. If you enter the wrong password three times, you cannot operate the display unit any further. In this situation, press the 1POWER switch to turn off the display unit. 1 Press MENU. The main menu appears on the screen. PICTURE/SOUND CONTROL Picture Mode: Vivid Adjust Picture Adjust Sound Select Set ENTER Exit MENU 2 Select "INITIAL SETUP/INFORMATION" with M/m and press ENTER. The INITIAL SETUP/INFORMATION menu appears on the screen. INITIAL SETUP/INFORMATION Language: Color System: Auto Shut Off: Security Lock: Information All Reset IP Address Setup Speed Setup English Auto Off Off To deactivate the Security Lock Select Set ENTER Exit MENU Press MENU and set "Security Lock" to "Off" in the INITIAL SETUP/INFORMATION menu. 39 (GB)