Sony FX52 Operating Instructions

Sony FX52 - VPL XGA LCD Projector Manual

Sony FX52 manual content summary:

  • Sony FX52 | Operating Instructions - Page 1
    2-655-762-15 (1) Data Projector Operating Instructions VPL-FX52/FX52L © 2005 Sony Corporation
  • Sony FX52 | Operating Instructions - Page 2
    energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference
  • Sony FX52 | Operating Instructions - Page 3
    IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSED OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. For safety Be sure to attach the air filter to the projector. For the customers in Europe The manufacturer of this product is Sony Corporation, 1-7-1 Konan, Minato-ku, Tokyo, Japan. The Authorized
  • Sony FX52 | Operating Instructions - Page 4
    Projecting 23 Effective Tools for Your Presentation 28 Maintenance Replacing the Lamp 42 Cleaning the Air Filter 43 Troubleshooting 45 Messages List 47 Others Specifications 49 Index 55 Adjustments and Settings Using the Menu Using the MENU 29 The PICTURE SETTING Menu ......30 The INPUT
  • Sony FX52 | Operating Instructions - Page 5
    manual, an accident may occur, causing serious injury. Never install it by yourself. For installation, be sure to consult with a Sony . • Do not look into the lens while the lamp is on. • Do not place your factory. On LCD projector • The LCD projector is manufactured using high-precision technology
  • Sony FX52 | Operating Instructions - Page 6
    . On installation • When the projector is mounted on the ceiling, the Sony PSS-620 Projector Suspension Support must be used for installation. • Allow adequate holes. Leave space of more than 50 cm (19 3/4 inches) between the wall and the projector. Be aware that room heat rises to the ceiling
  • Sony FX52 | Operating Instructions - Page 7
    not install the projector in the following situations. These installations may cause malfunction or damage to the projector. Poorly ventilated message "High temp.! Lamp off in 1 min." The power will be turned off automatically after one minute. • Leave space of more than 50 cm (19 3/4 inches) around
  • Sony FX52 | Operating Instructions - Page 8
    Conditions Do not use the projector under the following conditions. Toppling the unit Blocking the ventilation holes Avoid using something to cover over the ventilation holes (exhaust/intake); otherwise, the internal heat may build up. Placing a blocking object just in front of the lens Do not
  • Sony FX52 | Operating Instructions - Page 9
    ratio LCD panel with a microlens and the 300 W lamp provide high brightness (light output 6000 ANSI lumen) and lenses are available for the projector, depending on your setup condition. *For VPL-FX52 (with standard lens) only • Center positioned lens The projector is designed to locate the lens
  • Sony FX52 | Operating Instructions - Page 10
    remote control detector b Lens Remove the lens cap before projection. * The lens for VPL-FX52L are not supplied. c Lens cover d Control panel may occur, causing a fire or damage to the projector. • Do not place your hand or objects near Rear remote control detector j Lamp cover k Ventilation holes (
  • Sony FX52 | Operating Instructions - Page 11
    , clean the air filter periodically. Control Panel 12 3 LENS CONTROL RESET TEMP/FAN MENU ENTER LAMP/COVER INPUT APA POWER SAVING ON/STANDBY 9 87654 a LENS CONTROL key Enters the focus, zoom or shift adjustment mode. Next adjust them using the arrow keys. Each time you press the key
  • Sony FX52 | Operating Instructions - Page 12
    keys (M/m/
  • Sony FX52 | Operating Instructions - Page 13
    RESET key Resets Connects to a computer equipped with DVI (digital) output connector with a DVI cable. c use the networking function of this projector. CAUTION For safety, do not connect the connector for peripheral device wiring that might have excessive voltage to this port. Follow the instructions
  • Sony FX52 | Operating Instructions - Page 14
    qg qf qd ws COMMAND OFF ON PIC PJ NETWORK MUTING AUDIO INPUT LENS APA TILT/KEYSTONE VOLUME MENU/ TAB AIR SHOT FREEZE ENTER R CLICK D ZOOM RESET/ ESCAPE 1 3 2 FUNCTION RM-PJM15 PROJECTOR RM-PJM17 1 2 3 4 5 6 7 8 8 8 9 q; qa, qs a I / 1 key b MUTING keys • PIC: Cuts off the picture
  • Sony FX52 | Operating Instructions - Page 15
    with the connecting cable (not supplied) when using the Remote Commander as a wired one. In this case, you do not need to install the batteries since the power is supplied via the CONTROL S IN jack on the projector. m RESET/ESCAPE key Functions as a RESET key. Resets the value of an item to its
  • Sony FX52 | Operating Instructions - Page 16
    old battery with a new one or different types of batteries. • If you will not use the Remote Commander for a long time, remove the batteries to avoid damage from battery leakage and the remote control detector on the projector. • The operation range is limited. The shorter the distance between the
  • Sony FX52 | Operating Instructions - Page 17
    standard lens supplied with VPL-FX52. • When you use VPL-FX52L (Lens are not supplied), be sure refer to the operating instructions of "Installation Manual 610 (×-24 1/8) ×-762 (×-30) ×-914 ×-1143 ×-1372 ×-1524 ×-1905 ×-2286 (×-36) (×-45) (×-54 1/8) (×-60) (×-75 1/8) (×-90 1/8) × Minimum ×-417 ×-
  • Sony FX52 | Operating Instructions - Page 18
    . Connecting with a Computer or a VCR This section describes how to connect the projector to a computer or video equipment. For more information, refer to the computer's instruction manual. Notes • The projector accepts VGA, SVGA, XGA, SXGA, SXGA+ and UXGA (60 Hz) signals. However, we recommend that
  • Sony FX52 | Operating Instructions - Page 19
    to monitor out Computer Note • When connecting a Macintosh1) computer equipped with video output connector of a type having two rows of pins to the connector, use a commercially available plug adaptor. 1) Macintosh is a registered trademark of Apple Computer Inc. Connecting the Projector 19
  • Sony FX52 | Operating Instructions - Page 20
    To connect to a video GBR/Component equipment Front of the projector INPUT B DVI-D INPUT A RGB INPUT C R/R-Y/PR G/Y B/B-Y/PB the Input-C Signal Sel. setting in the SET SETTING menu. • Use the composite sync signal when you input the external sync signal from video GBR/component equipment.
  • Sony FX52 | Operating Instructions - Page 21
    setting is English. 4,5,6 3 2 TEMP/FAN LAMP/COVER LENS CONTROL RESET MENU ENTER INPUT APA POWER SAVING ON/STANDBY Setting LENS APA TILT/KEYSTONE VOLUME MENU/ TAB AIR SHOT FREEZE 2 3 4,5,6 1 Plug the AC power cord into a wall outlet. 2 Press the I / 1 key to turn on the projector
  • Sony FX52 | Operating Instructions - Page 22
    PICTURE SETTING Picture Mode: Adjust Picture... Input A 4 Press the M or m key to select the MENU SETTING menu, then press the , or ENTER key. The selected menu appears. : : : : Input A A 5 Press the M or m key to select "Language," then press the , or ENTER key. : : : : Input A 6 Press the
  • Sony FX52 | Operating Instructions - Page 23
    6~9 6~9 ON/STANDBY indicators 4 APA 2 TEMP/FAN LAMP/COVER LENS CONTROL RESET MENU ENTER INPUT APA POWER SAVING ON/STANDBY Setting Up and Projecting 1 Rear remote control detector 6~9 COMMAND OFF ON PIC PJ NETWORK MUTING AUDIO INPUT LENS APA TILT/KEYSTONE VOLUME MENU/ TAB AIR SHOT
  • Sony FX52 | Operating Instructions - Page 24
    to the INPUT B (digital) connector Computer etc., projector by pressing certain keys (e.g., LCD / VGA , / , etc.), or by changing your computer's settings. F7 or Fx and Fn Note The key for switching the computer to output to the projector varies depending on the type of a computer. 6 Press the LENS
  • Sony FX52 | Operating Instructions - Page 25
    for the standard lens. If you use the optional lens, adjust the zoom/focus with the lens ring. Attention Looking into the lens when projecting the INPUT SETTING menu when you adjust the picture manually. Using the security lock The projector is equipped with a security lock function. When the
  • Sony FX52 | Operating Instructions - Page 26
    Use: Cancel: Other key 3 Enter the password again to confirm. If "Invalid Password!" is displayed on the menu screen, perform again from step 1. INSTALL SETTING X Input A V Keystone: 0 Image Flip: Off Background: Blue Lamp Mode: Standard tries, the projector cannot be used. In this case
  • Sony FX52 | Operating Instructions - Page 27
    service center because you have forgotten the password, you will need to be able to verify the projector lights in red. (Except when using the Direct Power On/ Off function projector. On air filter To maintain optimal performance, clean the air filter whenever you replace the lamp. Projecting 27
  • Sony FX52 | Operating Instructions - Page 28
    Remote Commander. The digital zoom icon appears the center of the image. Digital zoom icon 2 Move the icon to the point on the image you want to enlarge. Use the arrow key original size Press the D ZOOM - key. Just pressing the RESET key returns the image back to its original size immediately. To
  • Sony FX52 | Operating Instructions - Page 29
    the Menu B Adjustments and Settings Using the Menu Using the MENU The projector is equipped with an on-screen menu for making various adjustments PICTURE SETTING ADJUST PICTURE Contrast: Brightness: RGB Enhancer: Gamma Mode: Color Temp: Standard 80 50 30 Graphics High Input A Using the MENU 29
  • Sony FX52 | Operating Instructions - Page 30
    reset are: • "Contrast," "Brightness," "Color," "Hue," "Sharpness" and "RGB Enhancer" in the Adjust Picture... menu. • "Dot Phase," "H Size," and "Shift" in the Adjust Signal... menu. About the memory of the settings The settings are automatically stored in the projector is used for Standard
  • Sony FX52 | Operating Instructions - Page 31
    Adjustments and Settings Using the Menu Adjust Picture... When the video signal is input PICTURE SETTING ADJUST PICTURE Standard Contrast: 80 PICTURE Contrast: Brightness: RGB Enhancer: Gamma Mode: Color Temp.: Standard 80 50 30 Graphics High Input A Contrast Adjusts the picture contrast
  • Sony FX52 | Operating Instructions - Page 32
    " is automatically selected. The INPUT SETTING Menu The INPUT SETTING menu is used to adjust the input signal. Items that cannot be adjusted depending on the is input. Note Note that if the projector is used for profit or for public viewing, modifying the original picture by switching to the wide
  • Sony FX52 | Operating Instructions - Page 33
    signals, you can use these preset data by adjusting "H Size." Make fine adjustment by adjusting "Shift." Signal Super Mac-2 SGI-1 Macintosh 19" Macintosh 21" Sony News PC9821 1,280 × 1,024 WS Sunmicro Memory No. SIZE 23 1,312 23 1,320 25 1,328 27 1,456 36 1,708 36 1,600 37 1,664
  • Sony FX52 | Operating Instructions - Page 34
    The SET SETTING Menu The SET SETTING menu is used for changing the settings of the projector. SET SETTING Input A Smar t APA: On color system according to the input signal. Power Saving When set to "On," the projector goes into power saving mode if you do not operate the unit for 10 minutes
  • Sony FX52 | Operating Instructions - Page 35
    Input A A The INSTALL SETTING Menu The INSTALL SETTING menu is used for changing the settings of the projector. INSTALL SETTING V Keystone: 0 Image Flip: Off Background: Blue Test Pattern: On Lamp Mode: Standard Lens Control: On Direct Power On: Off High Altitude Mode:Off Security
  • Sony FX52 | Operating Instructions - Page 36
    projected image will be lower compared with the "High" setting. Lens Control When set to "Off," the LENS key on the Remote Commander, and the LENS CONTROL key on the projector do not function. Direct Power On/Off function If you will be using a circuit breaker to turn the power for the entire system
  • Sony FX52 | Operating Instructions - Page 37
    key. You can confirm the IP address of the projector in the "Information menu" on page 36. note When you access the projector via a Web browser, do not use a proxy server. Enter the IP address here. Checking the Status of the Projector Click "Information." You can check the information and present
  • Sony FX52 | Operating Instructions - Page 38
    name of the "User" account is preset without a password to "root" at the factory. You can set the owner information, date and time, Mail Report, etc. Click "Apply" in the lower part of each window to update the projector to the data input in each window. If you change the setting using the remote
  • Sony FX52 | Operating Instructions - Page 39
    "root" at the factory. It cannot be changed. Operation and Administration using a Network Notes • When you change the password, input a new password after deleting the password (*****) that was set. • If you forget your password, consult with qualified Sony personnel. Setting Up the Projector 39
  • Sony FX52 | Operating Instructions - Page 40
    Report contains the product information, owner information, usage information (time) for the projector, lamp mode, memos, etc. Maintenance Report Lamp Reminder: Select this check box and enter the limit for the number of hours the projector lamp is to be used in the text box. This information
  • Sony FX52 | Operating Instructions - Page 41
    projector lamp has been used and the time when maintenance is required for the projector. Error: Select this check box to arrange the sending of an error report if any problem occurs with the projector from "Standard" or use. For details, consult with qualified Sony personnel. Note You cannot use
  • Sony FX52 | Operating Instructions - Page 42
    of use. Caution The lamp becomes a high temperature after turning off the projector with the I / 1 key. If you touch the lamp, you may scald your finger. When you replace the lamp, wait for at least an hour for the lamp to cool. Notes • If the lamp breaks, consult with qualified Sony personnel
  • Sony FX52 | Operating Instructions - Page 43
    projector to standby mode. 10Press the following keys on the control panel in the following sequence for less than five seconds: RESET,
  • Sony FX52 | Operating Instructions - Page 44
    of the air filter and the sheet into the six tabs of the air filter cover, and then attach the air filter cover to the projector. Notes • If you neglect to clean the air filter, dust may accumulate, clogging it. As a result, the temperature may rise inside the unit, leading to
  • Sony FX52 | Operating Instructions - Page 45
    Troubleshooting If the projector appears to be operating erratically, try to diagnose and correct the problem using the following instructions. If the problem persists, consult with qualified Sony LAMP/COVER • The electrical system breaks down. and TEMP/FAN indicators c Consult with qualified Sony
  • Sony FX52 | Operating Instructions - Page 46
    lamp has burnt or dims. c Replace the lamp with a new one (see page 42). The picture is not clear. • Picture is out of focus. c Adjust the focus (see page 24). • Condensation has occurred on the lens. c Leave the projector to PJ, then press the Remote Commander. MENU key. 46 Troubleshooting
  • Sony FX52 | Operating Instructions - Page 47
    lamp. • To erase a message c Press any key on the control panel of the projector or on the remote commander. • If this message appears again after you replace the lamp, the lamp replacement process is not complete. c Perform the operations in steps 9 and 10 on page 43. Maintenance Troubleshooting
  • Sony FX52 | Operating Instructions - Page 48
    Caution Messages Use the list below to check the meaning of the messages displayed on the screen. Message No Input Not applicable! Meaning and Remedy • No input signal c Check connections (see page 18). • You have pressed the wrong key. c Press the appropriate key. 48 Troubleshooting
  • Sony FX52 | Operating Instructions - Page 49
    f 50.8 to 64.0 mm/F 1.7 to 2.0 * The lens for VPL-FX52L are not supplied. Lamp 300 W Projection picture size Range: 40 to 300 inches (diagonal measure) Light output ANSI lumen1) 6,000 lm Projecting distance (Floor Installation) of VPL- FX52 (with standard lens) 40-inches: 1490 to 1820 mm
  • Sony FX52 | Operating Instructions - Page 50
    Lens cap (1) (for VPL-FX52 with standard lens only) AC power cord (1) Air filter (for replacement) (1) Operating Instructions, Installation Manual for Dealers (CD-ROM) (1) Quick Reference Manual Projector Lamp LMP-F300 (for replacement) Projector Suspension Support PSS-620 Signal Interface Cable
  • Sony FX52 | Operating Instructions - Page 51
    (female)) Projection Lense Long focus zoom lens VPLL-ZM101 F = 2.0 to 2.6 f = 89 to 133.5 mm Manual focus/zoom Projection the items may not be available in some areas. For details, please consult your nearest Sony office. Pin assignment INPUT A connector RGB input connector (HD D-sub 15pin, female)
  • Sony FX52 | Operating Instructions - Page 52
    Data0 - 5 NC 18 T.M.D.S. Data0 + 6 DDC Clock 19 T.M.D.S. Data0/5 Shield 7 DDC Data 20 NC 8 NC 21 NC 9 T.M.D.S. 22 T.M.D.S. Data1 Mode Video ComGBR puter zz zz z- z- z- - z z- - z 52 Specifications Item Input signal Video or S Com- Video Comvideo (Y/C) ponent GBR puter Color z
  • Sony FX52 | Operating Instructions - Page 53
    37.879 60.317 18 SVGA VESA 72 Hz 48.077 72.188 19 SVGA VESA 75 Hz 46.875 75.000 20 SVGA VESA 85 Hz XGA VESA 43 Hz 35.524 86.958 23 XGA VESA 60 Hz 48.363 60.004 24 XGA VESA 70 Hz 56.476 69.955 25 XGA VESA 75 Hz 60.023 75.029 26 XGA 1,568 1,504 1,472 1,800 1,728 Others Specifications 53
  • Sony FX52 | Operating Instructions - Page 54
    Memory Preset signal No. 34 1,280 × 1,024 35 36 37 38 39 1,600 × 1,200 43 480/60P 44 575/50P 45 1,080/50I fH (kHz) fV (Hz) SXGA VESA 43 Hz 46.433 then unplug and then plug back in the connecting cable, or else press the INPUT key and select the input signal again. 54 Specifications
  • Sony FX52 | Operating Instructions - Page 55
    10 Replacing the Lamp .......42 Reset resettable items ...........30 resetting the item ........30 RGB Enhancer 31 S Scan Converter 33 Screen size 17, 49 Security Lock 36 Selecting the Menu Language 21 SET SETTING Menu ....34 Sharpness 31 Shift 33 Smart APA 34 Specifications 49 Status 35
  • Sony FX52 | Operating Instructions - Page 56
    Supplied accessories ......50 T Test Pattern 35 Troubleshooting 45 U Using the MENU ...........29 V V Keystone 35 Ventilation holes exhaust 10 intake 10 W Wide Mode 32 56 Index
  • Sony FX52 | Operating Instructions - Page 57
    Sony Corporation
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57

© 2005 Sony Corporation
2-655-762-
15
(1)
Data Projector
Operating Instructions
VPL-FX52/FX52L