Sony HCD-E300 Operating Instructions - Page 63
Other Operations, Using the Control for HDMI Function for “BRAVIA” Sync
View all Sony HCD-E300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
Other Operations Other Operations Using the Control for HDMI Function for "BRAVIA" Sync This function is available on TVs with the "BRAVIA" Sync function only. By connecting Sony components that are compatible with the Control for HDMI function with an HDMI cable, operation is simplified as below: - Theater Mode (page 64) - One-Touch Play (page 64) - System Power Off (page 64) - Volume Limit (page 65) - System Audio Control (page 65) - Language Follow (page 65) Control for HDMI is a mutual control function standard used by CEC (Consumer Electronics Control) for HDMI (High-Definition Multimedia Interface). The Control for HDMI function will not work in the following cases: - When you connect this system to a component which is not compatible with the Control for HDMI function. - A component does not have an HDMI jack. There are convenient buttons on the system's remote for operating the TV, such as THEATER, ONE-TOUCH PLAY, and TV "/1. For details, see "Controlling Your TV with the Supplied Remote" (page 69) and refer to the operating instructions of the TV. ONE-TOUCH THEATER PLAY TV BRAVIA Sync S-AIR DYNAMIC MODE NIGHT BASS TV Note • Depending on the connected component, the Control for HDMI function may not work. Refer to the operating instructions supplied with the component. • The Control for HDMI function may not work if you connect a component other than Sony, even if the component is compatible with the Control for HDMI function. Preparing for the Control for HDMI function (Control for HDMI - Easy Setting) The system is compatible with the Control for HDMI - Easy Setting function. If the TV is compatible with the Control for HDMI - Easy Setting function, you can set the system's [Control for HDMI] function automatically by setting the TV. For details, refer to the operating instructions of the TV. If the TV is not compatible with the Control for HDMI - Easy Setting function, set the Control for HDMI function of the system and TV manually. Note • For details on setting the TV, refer to the operating instructions. 1 Make sure that the system and the TV are connected with an HDMI cable. 2 Turn on the TV and press [/1 to turn on the system. 3 Switch the input selector on your TV so that the signal from the system through the HDMI input appears on the TV screen. 4 Set the Control for HDMI function of the system and TV. The Control for HDMI function for system and TV is simultaneously set to on. 63US