Home » Sony Manuals » Audio Components » Sony HCD-E300 » Manual Viewer

Sony HCD-E300 Operating Instructions - Page 78

[Audio Settings], YCbCr/RGB HDMI], x.v.Color Output], Pause Mode] BD/DVD VIDEO/DVD-R, DVD-RW only

Add to My Manuals
Save this manual to your list of manuals

Page 78 highlights

[Off]: Select this when your TV is not compatible with 1080/24p video signals. Note • Video signals may not be output when [BD-ROM 1080/24p Output] is set to [On]. x [YCbCr/RGB (HDMI)] You can set the color setting for video signals output from the HDMI OUT jack. Select the setting that matches the connected TV type. [Auto]: Automatically detects the type of external device, and switches to the matching color setting. [YCbCr (4:2:2)]: Outputs YCbCr 4:2:2 video signals. [YCbCr (4:4:4)]: Outputs YCbCr 4:4:4 video signals. [RGB (16-235)]: Select this when connecting to a device with an HDCP-compliant DVI jack. [RGB (0-255)]: Select this when connecting to an RGB (0-255) device. x [x.v.Color Output] You can set whether to send xvYCC information to the connected TV. Combining xvYCC-compatible video with a TV that supports x.v.Color display makes it possible to more accurately reproduce object colors present in the natural world. [Auto]: Normally select this. [Off]: Select this when the picture is unstable or colors appear unnatural. x [Pause Mode] (BD/DVD VIDEO/DVD-R/ DVD-RW only) You can select the picture in pause mode. [Auto]: The picture, including subjects that move dynamically, is output with no jitter. Normally select this position. [Frame]: The picture, including subjects that do not move dynamically, is output in high resolution. [Audio Settings] You can make the audio settings. x [BD Audio Setting] You can select whether to mix or not mix the interactive audio (button sound, effect sound, etc.) and secondary audio (commentary) when playing a BD that contains such audio. [Mix]: Outputs the audio obtained by mixing the interactive audio and secondary audio to the primary audio. [Direct]: Outputs the primary audio only. x [Audio DRC] (BD/DVD VIDEO only) You can compress the dynamic range of the sound track. [Audio DRC] is useful for watching movies at low volume late at night. [Auto]: Performs playback at the dynamic range specified by the disc (BD-ROM only). [Off]: No compression of dynamic range. [On]: The system reproduces the sound track with the kind of dynamic range that the recording engineer intended. x [Attenuate - TV] Distortion may occur when you listen to a component connected to the TV (AUDIO IN L/ R) jacks. You can prevent distortion by reducing the input level on the unit. Distortion is not a malfunction and will depend on the component connected. [On]: Attenuates the input level. The output level is changed. [Off]: Normal input level. 78US

Section	Page
WARNING	2
About These Operating Instructions	4
About the S-AIR function	5
Unpacking	7
Using the remote	10
Attaching the foot pads to the subwoofer	10
Index to Parts and Control	11
Remote control	11
Front panel	13
Front panel display	14
Rear panel	15
Getting Started	16
Step 1: Installing the System	16
Positioning the speakers	16
Installing the speakers on a wall	18
Step 2: Connecting the System	20
Connecting the speakers	20
Connecting the TV (Video connection)	21
Connecting the TV (Audio connection)	22
Connecting the other components	23
Connecting the antenna (aerial)	25
Inserting the external memory	26
Connecting to the network	27
Connecting the AC power cord (mains lead)	28
Step 3: Performing the Easy Setup	29
Step 4: Selecting the Source	32
Step 5: Enjoying Surround Sound	33
Selecting surround sound effects based on your listening preference	33
Playback	36
Playing a BD/DVD	36
Changing the angles	38
Displaying the subtitles	38
Resuming playback from the point where you stopped the disc	39
Using the BD’s or DVD’s menu	39
Searching for a scene quickly	40
Searching for a Title/Chapter	40
Displaying the playing time and play information	41
Adjusting pictures for videos	42
Adjusting the delay between the picture and sound	42
Enjoying BonusView/BD- Live	43
Playing a CD	44
Playing Photo Files	45
Sound Adjustment	47
Selecting the Effect to Suit the Source	47
Selecting the Audio Format, Multilingual Tracks, or Channel	48
Enjoying Multiplex Broadcast Sound	49
Using the Sound Effect	49
Reinforcing bass frequencies	49
Enjoying sound at low volume	50
Changing the tonal balance	50
Tuner	51
Listening to the Radio	51
Presetting radio stations	52
Selecting the preset station	52
Selecting a radio station by inputting a frequency directly	52
If an FM program is noisy	53
Operating the tuner function using the system menu	53
External Audio Device	55
Using the DIGITAL MEDIA PORT Adapter	55
Playing the connected component on the system	55
Using an S-AIR Product	56
Inserting the wireless transmitter/transceiver	56
Establishing sound transmission between the unit and S-AIR sub unit (ID setting)	57
Enjoying the system’s sound in another room	58
Enjoying the S-AIR receiver while the unit is in standby mode	59
Identifying the unit with a specific S-AIR sub unit (Pairing operation)	60
Checking the S-AIR status of the unit	61
If sound transmission is unstable	61
Other Operations	63
Using the Control for HDMI Function for “BRAVIA” Sync	63
Preparing for the Control for HDMI function	63
Using the Theater Mode	64
Watching BD/DVD by a single button press	64
Turning the system off in sync with the TV	64
Enjoying TV sound from the speakers in this system	65
Setting the Maximum Volume Level of the System	65
Changing the language for the on-screen display of the TV	65
Calibrating the Appropriate Settings Automatically	66
Setting the Speakers	67
Controlling Your TV with the Supplied Remote	69
Preparing the remote for controlling the TV	69
Controlling the TV with the remote	70
Using the Sleep Timer	71
Changing the Brightness of the Front Panel Display	71
Deactivating the Buttons on the Unit	72
About the demonstration	72
Saving Power in Standby Mode	73
Settings and Adjustments	74
Using the Setup Display	74
[Network Update]	75
Updating the system’s software using the network	75
Updating the system’s software using an update disc	76
[Video Settings]	76
[Audio Settings]	78
[BD/DVD Viewing Settings]	80
[Photo Settings]	82
[HDMI Settings]	82
[System Settings]	83
[Network Settings]	84
[Easy Setup]	85
[Resetting]	86
Resetting the system settings other than the settings related to password	86
Resetting all the system settings to the default	86
Additional Information	87
Precautions	87
Notes about the Discs	88
Troubleshooting	89
Self-diagnosis Function	95
Playable Discs	96
Supported Audio Formats	98
Video Output Resolution	99
Specifications	100
Language Code List	102
Parental Control/Area Code List	102
Terms and Conditions of Use and End User License Agreement	103
Software License Information	105
Glossary	114

Match case Limit results 1 per page

[Off]: Select this when your TV is not

compatible with 1080/24p video signals.

Note

• Video signals may not be output when [BD-ROM

1080/24p Output] is set to [On].

[YCbCr/RGB (HDMI)]

You can set the color setting for video signals

output from the HDMI OUT jack. Select the

setting that matches the connected TV type.

[Auto]

: Automatically detects the type of

external device, and switches to the matching

color setting.

[YCbCr (4:2:2)]: Outputs YCbCr 4:2:2 video

signals.

[YCbCr (4:4:4)]: Outputs YCbCr 4:4:4 video

signals.

[RGB (16-235)]: Select this when connecting to

a device with an HDCP-compliant DVI jack.

[RGB (0-255)]: Select this when connecting to

an RGB (0-255) device.

[x.v.Color Output]

You can set whether to send xvYCC information

to the connected TV.

Combining xvYCC-compatible video with a TV

that supports x.v.Color display makes it possible

to more accurately reproduce object colors

present in the natural world.

[Auto]

: Normally select this.

[Off]: Select this when the picture is unstable or

colors appear unnatural.

[Pause Mode] (BD/DVD VIDEO/DVD-R/

DVD-RW only)

You can select the picture in pause mode.

[Auto]

: The picture, including subjects that

move dynamically, is output with no jitter.

Normally select this position.

[Frame]: The picture, including subjects that do

not move dynamically, is output in high

resolution.

[Audio Settings]

You can make the audio settings.

[BD Audio Setting]

You can select whether to mix or not mix the

interactive audio (button sound, effect sound,

etc.) and secondary audio (commentary) when

playing a BD that contains such audio.

[Mix]: Outputs the audio obtained by mixing the

interactive audio and secondary audio to the

primary audio.

[Direct]

: Outputs the primary audio only.

[Audio DRC] (BD/DVD VIDEO only)

You can compress the dynamic range of the

sound track. [Audio DRC] is useful for watching

movies at low volume late at night.

[Auto]

: Performs playback at the dynamic range

specified by the disc (BD-ROM only).

[Off]: No compression of dynamic range.

[On]: The system reproduces the sound track

with the kind of dynamic range that the

recording engineer intended.

[Attenuate - TV]

Distortion may occur when you listen to a

component connected to the TV (AUDIO IN L/

R) jacks. You can prevent distortion by reducing

the input level on the unit. Distortion is not a

malfunction and will depend on the component

connected.

[On]

: Attenuates the input level. The output

level is changed.

[Off]: Normal input level.