Sony HCD-FX80 DAVFX80 Instructions (complete HT system) - Page 83

1.0 - 7.0 m/ 4 - 23 ft 0.0 - 7.0 m/ 0 - 23 ft Be sure to change the value in the Setup Display when you move the speakers. [FRONT] 3.0 m/10 ft* Front speaker distance from the listening position can be set in 0.2 meter (1 ft) increments from 1.0 to 7.0 meters (4 to 23 ft). [CENTER] 3.0 m/10 ft* (appears when you set [CENTER] to [YES] in the [SIZE] setting.) Center speaker distance from the listening position can be set in 0.2 meter (1 ft) increments from 0.0 to 7.0 meters (0 to 23 ft). [SURROUND] Surround speaker distance from the 3.0 m/10 ft* (appears except when you set [SURROUND] listening position can be set in 0.2 meter (1 ft) increments from 0.0 to 7.0 meters (0 to 23 ft). to [NONE] in the [SIZE] setting.) * When you perform the Quick Setup (page 33), the default settings are changed. Note • When you set the distance, the sound cuts off for a moment. • If all front and surround speakers are not placed at an equal distance from your listening position, set the distance according to the closest speaker. • Do not place the surround speakers farther away from your listening position than the front speakers. • Depending on the input stream, the [DISTANCE] setting may not be effective. x [LEVEL (FRONT)] You can vary the level of front speakers as follows. Be sure to set [TEST TONE] to [ON] for easy adjustment. Settings and Adjustments [L] 0 dB Set this between -6 dB and 0 dB in 1 dB increments. [R] 0 dB Set this between -6 dB and 0 dB in 1 dB increments. [CENTER] Set this between -6 dB and +6 dB 0 dB in 1 dB increments. (appears when you set [CENTER] to [YES] in the [SIZE] setting.) [SUBWOOFER] Set this between -6 dB and +6 dB 0 dB in 1 dB increments. x [LEVEL (SURROUND)] You can vary the level of surround speakers as follows. Be sure to set [TEST TONE] to [ON] for easy adjustment. (This settings appear except when you set [SURROUND] to [NONE] in the [SIZE] setting.) [L] 0 dB [R] 0 dB Set this between -6 dB and +6 dB in 1 dB increments. Set this between -6 dB and +6 dB in 1 dB increments. To adjust the volume of all the speakers at one time Press VOLUME +/- on the system, or press VOLUME +/- on the remote. x [TEST TONE] The speakers will emit a test tone to adjust [LEVEL (FRONT)] and [LEVEL (SURROUND)]. [OFF] [ON] The test tone is not emitted from the speakers. The test tone is emitted from each speaker in sequence while adjusting level. When you select one of the [SPEAKER SETUP] items, the test tone is emitted from each speaker in sequence. Adjusting the speaker level by using the test tone 1 Press DISPLAY when the system is in stop mode. continued 83US