Sony HDR-PJ260V Operating Guide - Page 73
Others/Index, PJ580V/PJ600/PJ600V/XR260V.
View all Sony HDR-PJ260V manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
The battery pack is nearly used up. both hands and record the image. However, note that the camera-shake warning indicator does not disappear. The battery pack temperature is high. Change the battery pack or place it in a cool place. No memory card is inserted (p. 25). When the indicator flashes, there are not enough free spaces for recording images. Delete unnecessary images (p. 51), or format the memory card after storing the images on other media (p. 69). The image data base file may be damaged. Check the data base file by selecting [Setup] [ Media Settings] [Repair Img. DB F.] the recording medium (HDR- CX260V/CX580V/PJ260/PJ260V/PJ580/ PJ580V/PJ600/PJ600V/XR260V). The memory card is damaged. Format the memory card with your camcorder (p. 69). Incompatible memory card is inserted (p. 26). The memory card is write-protected. Access to the memory card was restricted on another device. The drop sensor function (p. 69) is activated, and has detected that the camcorder has been dropped. Therefore, the camcorder is taking steps to protect the internal hard disk. Recording/playback may be disabled as a result. The drop sensor function does not guarantee the protection of the internal hard disk under all possible situations. Use the camcorder under stable conditions. The recording medium is full. Photos cannot be recorded during processing. Wait for a while, then record. When [ REC Mode] is set to [Highest Quality ] or [60p Quality ], you cannot capture photos while recording movies. Furthermore, if [ Frame Rate] is set to [24p] (HDR-CX580V/PJ580/PJ580V/PJ600/ PJ600V), you cannot record photos while the camcorder is in movie recording standby mode. Others/Index There is something wrong with the flash. The amount of lights is not sufficient, so camera-shake easily occurs. Use the flash. The camcorder is unsteady, so camera-shake easily occurs. Hold the camcorder steady with US 73