Sony HVRM10U Operating Instructions
Sony HVRM10U - Professional Video Cassete recorder/player Manual
 |
View all Sony HVRM10U manuals
Add to My Manuals
Save this manual to your list of manuals |
Sony HVRM10U manual content summary:
- Sony HVRM10U | Operating Instructions - Page 1
2-549-780-11(1) Digital HD Videocassette Recorder Operating Instructions HVR-M10U/M10N/M10E/M10P 2005 Sony Corporation - Sony HVRM10U | Operating Instructions - Page 2
is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. For customers in the U.S.A. HVR-M10U only If you have any questions about this product, you may call: Sony's Business Information Center (BIC - Sony HVRM10U | Operating Instructions - Page 3
CAUTION You are cautioned that any changes or modifications not expressly approved in this manual could void your authority to operate this equipment. NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to Part 15 of the FCC Rules. These - Sony HVRM10U | Operating Instructions - Page 4
Chapter1 Overview Chapter2 Playback and Recording Chapter3 Dubbing/Editing 4 Table of Contents Features 6 Location and Function of Parts 8 Front Panel 8 Section behind the Operation Panel 10 Inside of the Front Panel 14 Rear Panel 15 Supplied Remote Commander 17 Displaying Various Data - Sony HVRM10U | Operating Instructions - Page 5
on the LCD Screen 62 About Moisture Condensation 63 Digital Hours Meter 63 About the Built-in Rechargeable Battery 64 Using your Videocassette Recorder abroad 64 Using the optional battery 65 About the "InfoLITHIUM" battery pack 67 Compatibility of HDV, DVCAM, and DV Formats .......... 68 - Sony HVRM10U | Operating Instructions - Page 6
Overview 1 Chapter Chapter 1 Overview Features The HVR-M10U/M10N/M10E/M10P is a digital HD videocassette recorder supporting HDV format. Offering the DVCAM/DV format, this unit produces stable, superior picture quality by digital processing and separating image signals into color difference - Sony HVRM10U | Operating Instructions - Page 7
to playback a tape recorded in the HDV format, you can dowoncovert any images to output them. This function allows you to preview recorded-images on a regular monitor. Also, you can select an aspect ratio from the SQUEEZE, LETTER BOX, or EDGE CROP (side cut). 16:9 Built-in color LCD monitor The unit - Sony HVRM10U | Operating Instructions - Page 8
. 6 Operation panel 1 q (cassette) indicator 2 CHG (charge) indicator 3 50 indicator 4 60 indicator 5 HDV indicator 6 DVCAM indicator 7 HDV-i.LINK indicator 8 DV-i.LINK indicator ...1) "EE" stands for "Electric to Electric." In EE mode, the video and audio signals input to the VCR's recording - Sony HVRM10U | Operating Instructions - Page 9
up when there is no input signal, [VCR HDV/DV] is set to [AUTO], and the immediately preceding signal input was recorded in HDV format. 6 DVCAM indicator Lights up when the unit is in the following operating status. • When a tape recorded in the DVCAM format is being played back. • When [ REC MODE - Sony HVRM10U | Operating Instructions - Page 10
. (p. 65) 4 INPUT SELECT switch You can select HDV/DV, S VIDEO, or VIDEO to input signals. The type of selected signal is displayed on the Data screen on the LCD monitor on the front panel. When HDV/DV is selected, input the signal you selected in [VCR HDV/DV] on the [IN/OUT REC] menu. (p. 48 - Sony HVRM10U | Operating Instructions - Page 11
index, see "Recording Functions" on page 34. 7 LCD ON/OFF switch Press this switch to turn the LCD monitor ON and OFF. 8 MENU button Press this button to display the menus. For details of the menu, see "Operating the Menus" on page 45. 9 EXEC (execute) button Press this button to change the setting - Sony HVRM10U | Operating Instructions - Page 12
Chapter 1 Overview Location and Function of Parts 2 Audio control section 1 AUTO/MANU (manual) audio switch Switches the audio recording level adjustment mode. AUTO: The recording level is automatically adjusted in accordance with an input audio. MANU: Enables the AUDIO REC LEVEL control knobs. * - Sony HVRM10U | Operating Instructions - Page 13
the recording formats are switched between HDV, DVCAM, and DV or where the format of the system signals are changed between 50i and 60i, the picture and sound will be distorted on such a portion. • You can play back a tape recorded in the HDV/ DVCAM/DV format in SP mode. LP mode is not supported - Sony HVRM10U | Operating Instructions - Page 14
Chapter 1 Overview Location and Function of Parts Inside of the Front Panel 1 RESET button 2 EJECT button 3 Cassette compartment 1 RESET button Press this button to clear all settings including the date and time. - Sony HVRM10U | Operating Instructions - Page 15
5 LANC jack 6 HDV/DV jack 7 Battery terminal signals. During normal recording, sounds are recorded onto channels 1 can set the output video format by using [COMPONENT] on ohms) You might need to change output signals. This depends on the high-definition (HD) video output. entire screen) of - Sony HVRM10U | Operating Instructions - Page 16
the instruction manual of the external device. Note This jack can accept only HDV/DV/DVCAM signals. For details , see "About i.LINK" on page 72. 7 Battery terminal For details on batteries, see "Preparing the Power Supply" on page 22. 5 LANC jack Use when controlling the tape transport operation of - Sony HVRM10U | Operating Instructions - Page 17
Chapter 1 Overview Supplied Remote Commander 1 SEARCH SELECT buttons 2 Buttons for playing at various recording date/time, camera data). For details on data codes, see "Displaying information (data codes) recorded on a tape" on page 27. 7 INDEX WRITE button Press this button during the recording - Sony HVRM10U | Operating Instructions - Page 18
change this setting. • Set [REMOTE CTRL] on the [OTHERS] menu to [ON] to enable the Remote Commander to control the unit. • In addition to the Remote Commander supplied with the unit, the unit accepts signals from any Sony Remote ) with the correct polarity. Be sure to install the battery from the - Sony HVRM10U | Operating Instructions - Page 19
is [1080i/576i] when [50i/60i SEL] is set to 50i. 1 Remaining battery When you use this unit with a battery, the battery remaining time is displayed. This information may not be displayed correctly depending on the operating status and the environment. 2 Format indicator [HDV1080i], [DVCAM], or [DV - Sony HVRM10U | Operating Instructions - Page 20
, displays the audio mode recorded on the tape. During the i.LINK input, displays the audio mode of the signal input to HDV/ DV jack. Notes • The audio mode will not be displayed when [VCR HDV/DV] on the [IN/OUT REC] menu is set to [HDV]. • Signals other than the HDV/DVCAM lock mode will become non - Sony HVRM10U | Operating Instructions - Page 21
the HDV/DV format. We recommend you to use a Mini-DVCAM cassette, or digital master cassette (PHDVM-63DM) for recording in the DVCAM format. Cassette memory Some Mini-DV and Mini-DVCAM cassettes have the cassette memory mark. This unit, however, does not support cassette memory. Checking the tape - Sony HVRM10U | Operating Instructions - Page 22
Recording 3 After checking the tape for slack, hold the cassette so that the tape window is facing upward or malfunctions may occur. The [CLOCK SET] screen appears when you turn on the unit for the to light. The internal sensor of the unit may operate incorrectly if too much light falls on the unit. - Sony HVRM10U | Operating Instructions - Page 23
portion recorded in the HDV/ DVCAM format and one recorded in the DV format (SP mode), the following limitations are applied when you play back the tape with this unit: • The image may be distorted and noise may occur at the point where the recording format changes on the tape. • The tape transport - Sony HVRM10U | Operating Instructions - Page 24
Chapter 2 Playback and Recording Notes on Power Supply and Video Cassettes Installing hold the unit until it is loaded into the unit. Otherwise the cassette may fall out and the tape may be damaged. For details on inserting a cassette, see "Notes on Power Supply and Video Cassettes" on page - Sony HVRM10U | Operating Instructions - Page 25
cable must be HDV or DV format compatible. To play back a tape recorded in the HDV mode on a DV-compatible monitor, set [i.LINK CONV] on the [IN/OUT REC] menu to [ON] before connecting the unit with the i.LINK cable. For details, refer to your monitor's instruction manual. • Some general consumer - Sony HVRM10U | Operating Instructions - Page 26
player (this unit) Chapter 2 Playback and Recording in "Location and Function of Parts" on page 15. • If DVCAM/DV formatted signals including copyright control signals through the COMPONENT OUT jacks. • This unit cannot output images recorded in the DVCAM/DV format after up-converting the tape to HDV - Sony HVRM10U | Operating Instructions - Page 27
Press the STOP button on this unit. To pause playback Press the PAUSE button on this unit. Notes • If the unit is playing a portion of a tape where the recording format changes between HDV, DVCAM, and DV, the picture and sound will be distorted on such portions. • You cannot play back an image - Sony HVRM10U | Operating Instructions - Page 28
unit are different from those shown on the digital camcorder and digital HD video camera recorder. Playing at various speeds You can enjoy playback functions using the Remote Commander. DVCAM/DV formatted tape Playback options Operation Play at 1/10 of normal speed Press × 1/10 button during - Sony HVRM10U | Operating Instructions - Page 29
Recording HDV formatted tape Button × 1/10 × 1/3 × 1 × 2 FRAME c/C / Operation Remote Commander while pointing it toward a Sony device other than this unit, the playback speed may turn to 1/5 of normal speed. - when you playback a tape in the DVCAM/DV format and press the ×1/5 button on a remote - Sony HVRM10U | Operating Instructions - Page 30
cannot add search signals after recording. • When recording on this unit, signals for Index search do not have information on the day of the week. • This unit does not support cassette memory. • Searching may not be done correctly if the tapes were not recorded on Sony-brand digital video equipment - Sony HVRM10U | Operating Instructions - Page 31
[AUTO]. To record video from a DVCAM/DV equipment, set [VCR HDV/DV] on the [IN/OUT REC] menu to [AUTO] or [DV] before connecting the i.LINK cable (p. 48). If you change the setting after connecting the i.LINK cable, the video equipment may not be able to recognize the video signals correctly. • This - Sony HVRM10U | Operating Instructions - Page 32
connectors of the player, a humming noise screen on the unit. • When you connect only the AUDIO IN jack when the HDV indicator is lit, no audio is input. You must connect the VIDEO IN jack at the same time or set [VCR HDV/DV] on the [IN/OUT REC] menu to [DV]. 32 Chapter 2 Playback and Recording - Sony HVRM10U | Operating Instructions - Page 33
running mode from being changed by an incorrect operation. 1 Turn the power on the monitor, then set the monitor's input according to the input signals. 2 Set up the player to play back a tape. For details, refer to the instruction manual of the player. 3 When the player is connected to the IN jacks - Sony HVRM10U | Operating Instructions - Page 34
audio after recording, select the DVCAM format, then set [AUDIO MODE] on the [AUDIO SET] menu to [FS32K] (4-channel mode) before recording. (p. 47) Recording Procedures This section describes the procedures used to record signals sent from another VCR to this unit. For details on the operation when - Sony HVRM10U | Operating Instructions - Page 35
by the editing software. For details on the editing methods, refer to the instruction manual of the editing software. • You cannot use the DSR-25/45-equipped duplicate function to dub a tape recorded in HDV/DV format via the i.LINK connection. Use the procedure in this chapter to perform dubbing - Sony HVRM10U | Operating Instructions - Page 36
recorded images may appear grainy. • When video signals in the HDV format is played back, you cannot output pictures in the playback pause mode or played back at various speeds other than normal via the HDV/DV wish to output. Recorder Monitor Rear view of the player (this unit) Chapter - Sony HVRM10U | Operating Instructions - Page 37
an input. For details, refer to your recorder's instruction manual. 3 Start playback on this unit and start recording on the recorder. For details, refer to the instruction manual of the recorder. 4 When dubbing is finished, stop recording on the recorder, and then stop playback of this unit. 37 - Sony HVRM10U | Operating Instructions - Page 38
supplied instruction manual of cable, set [VCR HDV/ DV] and [i.LINK format that cannot be processed by the personal computer (editing machine), the personal computer (editing machine) may not recognize the unit correctly or may hang up. • When this unit outputs an analog signal input from the HDV/DV - Sony HVRM10U | Operating Instructions - Page 39
machine in the DVCAM/DV format, set [VCR HDV/DV] to [AUTO] or [HDV] (p. 48). • When you want to load a tape recorded in the HDV format into an editing machine in the DV format, set [VCR HDV/DV] to [DV] (p. 48) and then set [i.LINK CONV] to [DV] (p. 49). Notes • The operation may not work with - Sony HVRM10U | Operating Instructions - Page 40
time code of a source tape. • When images recorded in the DVCAM/DV format are input from the HDV/DV jack, you can preset a user bit time code on this unit. However, you cannot copy the user bit and time code of a source tape. • For a tape recorded both in HDV and DVCAM/DV formats, the time code may - Sony HVRM10U | Operating Instructions - Page 41
time clock Select the [TC/UB SET] menu, [UB TIME REC], then [ON]. Note The user bit time display is recorded at three-frame intervals for a tape recorded in the HDV1080i format. To set the time code when the recording starts Set [TC MAKE] on the [TC/UB SET] menu to select the time code to - Sony HVRM10U | Operating Instructions - Page 42
was able to read correctly on the tape. If you remove the cassette, the mode of the last position it was able to read correctly is cleared and by the unit during recording in the DVCAM format is that of the nondrop frame mode. Even if a 60i system signal is input to the HDV/DV jack, the time code - Sony HVRM10U | Operating Instructions - Page 43
• You can dub the sound onto a DVCAM-formatted tape (recorded) in the 32 kHz audio mode (4-channel/ 12 bits). You cannot dub sound recorded in 48 kHz (2-channel/16 bits) audio mode on a tape or a tape recorded in nonstandard audio. • If the audio mode of the recorded tape is 32 kHz, you can dub the - Sony HVRM10U | Operating Instructions - Page 44
mode. X lights on the screen. 6 Select the recording level adjustment mode using the AUTO/MANU (manual) audio switch. If the MANU tape recorded in the HDV format - When the INPUT SELECT switch is set to HDV/ DV - Tape recorded with [DV]. - Tape recorded with [FS48K]. - On a blank portion of the tape - Sony HVRM10U | Operating Instructions - Page 45
Do not pull out the power cord plug (battery or AC adaptor power cord) while operating the menus or adjusting the brightness of the LCD monitor. Otherwise, the settings of the menu may be changed accidentally. Displaying the menu 1 Press the MENU button. 2 Pressing the f/F buttons, select the menu - Sony HVRM10U | Operating Instructions - Page 46
LCD BL LEVEL (page 48) VCR HDV/DV (page 48) REC MODE (page 49) COMPONENT (page 49) i.LINK CONV (page 49) DOWN CONVERT(page 49) TC PRESET (page 50) UB PRESET (page 50) TC FORMAT (page 53) REMOTE CTRL(page 53) 50i/60i SEL (page 53) * available only when you use a 60i formatted signal Chapter 4 - Sony HVRM10U | Operating Instructions - Page 47
HDV recording. • You cannot change the setting of this item during recording. • Noise may occur at the instant you switch the audio mode. • If you intend to the dub sound on the tape recorded in the DVCAM format menu is valid only when the AUTO/MANU (manual) audio switch is set to MANU. When AUTO - Sony HVRM10U | Operating Instructions - Page 48
to the i.LINK cable to a personal computer that supports the HDV format (see page 25, 32). DV : Outputs signals of portions recorded in DVCAM/DV format during tape playback. When the i.LINK cable is connected, only the signals in the DVCAM/DV format from the HDV/DV jack are input or output for - Sony HVRM10U | Operating Instructions - Page 49
LINK cable is connected when you change the setting, the video equipment may not be able to recognize the signal correctly. • You cannot convert an image in HDV format into the DVCAM format. Set the video signal output format for playing back a tape recorded in the HDV format or through i.LINK input - Sony HVRM10U | Operating Instructions - Page 50
the [50i/60i SEL] is set to 50i, the unit operates as a 50i specification model. Therefore, the time code generated by the unit while recording in the DVCAM format changes to the non-drop frame mode. Even if a 60i system signal is input to the HDV/DV jack when the [50i/60i SEL] is set to 50i - Sony HVRM10U | Operating Instructions - Page 51
recorded on the tape. If no time code is recorded on the tape, it starts from 00:00:00:00. PRESET : The time code starts from the value set in [TC PRESET] on the [TC/UB SET] menu. UB TIME REC OFF : The time is not recorded as a user bit code. ON : The time is recorded as a user - Sony HVRM10U | Operating Instructions - Page 52
to 0, the clock returns to the originally set time. LANGUAGE You can select or change the language used for on-screen display. For HVR-M10U: You can select from English, Simplified English or Canadian-French. For HVR-M10N: You can select from English, Simplified English, Latin American Spanish - Sony HVRM10U | Operating Instructions - Page 53
such as the time code on the LCD monitor of this unit and an external monitor. Refer to page 63 for details. ON : Uses the supplied wireless Remote Commander. OFF : Does not use the Remote Commander. This setting will prevent accidental operation caused by a remote control unit of another equipment - Sony HVRM10U | Operating Instructions - Page 54
Sony dealer. General Operation Troubles Symptom A menu item is not available. Some menu item settings change accidentally. The supplied wireless Remote items are only available when the tape is inactive. • There are power cord during a menu operation or LCD monitor brightness adjustment. t Adjust - Sony HVRM10U | Operating Instructions - Page 55
reconnect it after about 1 minute. If the unit does not operate even after you reconnect the power, use a sharp-tipped Correctly reinstall the battery. If the lamp continues to flash even after reinstalling the battery, remove the power cord from the AC outlet and contact Sony Customer Service - Sony HVRM10U | Operating Instructions - Page 56
Troubleshooting Cassette tapes Symptom A cassette tape cannot be removed. Cause/Remedy t Check whether the power supply (battery or AC adaptor) is connected properly. t Remove the battery and reinstall it. t Install a charged battery. The cassette tape is not ejected when you • Moisture - Sony HVRM10U | Operating Instructions - Page 57
also an audio cable. t When you watch a tape recorded in the HDV format on a 4:3 television set, set [DOWN CONVERT] on the [IN/OUT REC] menu correctly before playback. t DVCAM/DV tape images recorded in wide mode are not displayed correctly. Use a widescreen-compatible monitor. After playing at - Sony HVRM10U | Operating Instructions - Page 58
switch is set to a position other than HDV/DV. t Set the switch to HDV/DV. t Set [VCR HDV/DV] on the [IN/OUT REC] menu correctly. • You are trying to dub the sound onto an HDV or DV-formatted tape. t Sounds can be dubbed only onto a DVCAM-formatted tape (recorded) in the 32 kHz audio mode (4-channel - Sony HVRM10U | Operating Instructions - Page 59
LCD Corrective Action If an error still recurs after you retry the corrective actions several times, contact Sony Customer Service , and then retry the operation. t Replace the tape. • The remaining battery power recording (page 21). Z (Eject cassette warning)* The icon flashes rapidly. • The tape - Sony HVRM10U | Operating Instructions - Page 60
protection. Cannot add audio on the blank portion of a tape. HDV recorded tape. Cannot add audio. Not recorded in DVCAM mode. Cannot add audio. Cannot add audio. Change to correct tape format. No output image in "VCR HDV/DV". Change format. "x Dirty video head. Use a cleaning cassette." Cause - Sony HVRM10U | Operating Instructions - Page 61
in summer), its cabinet, mechanical parts, etc., may be damaged or it may not work correctly. If the unit is brought directly VCR is a high-precision piece of equipment that records and plays back the picture recorded on a magnetic tape. In particular, the video heads and other mechanical parts - Sony HVRM10U | Operating Instructions - Page 62
the terminals, the correct remaining tape time may not be screen or if the entire screen turns black, use the cleaning cassette. To use the cleaning cassette Refer to your cleaning cassette's instruction manual consult your Sony dealer. Notes on the LCD Screen The LCD screen is manufactured using - Sony HVRM10U | Operating Instructions - Page 63
time, the head drum rotation time, the tape running time and the number of unthreading operations. These counts can be displayed on the menu. Use them as guidelines for scheduling maintenance. In general, consult your Sony dealer about necessary periodic maintenance checks. The digital hours - Sony HVRM10U | Operating Instructions - Page 64
the period of operating this unit is short, the battery discharges gradually and if it is not used at all for approximately 3 months, the battery will discharge completely. If that case, charge the battery and then start using the unit. If you do not need to record the date and time when - Sony HVRM10U | Operating Instructions - Page 65
InfoLITHIUM" L series battery packs have the mark. "InfoLITHIUM" is a trademark of Sony Corporation. 1 Attach the battery with the power turned off. BATT RELEASE (battery INFO BATTERY CHARGE LEVEL 1 PLAY TIME AVAILABLE LCD SCREEN ON 435 min 2 LCD SCREEN OFF 500 min 3 1 BATTERY CHARGE LEVEL: - Sony HVRM10U | Operating Instructions - Page 66
HDV recording time 150 175 310 360 465 545 DVCAM/DV recording time 170 200 355 415 530 630 Upper: when LCD Panel is ON Bottom: when LCD a low-temperature environment, the recording and playback times will be shortened. • The CHG (charge) lamp may flash or correct BATTERY INFO may not be - Sony HVRM10U | Operating Instructions - Page 67
indicated correctly. Note, however, that the indicator display may not be restored if the battery is used in high temperatures for a long time, left in a fully charge state, or is used frequently. The remaining battery time indicator is a guide to the approximate recording time. • In some operating - Sony HVRM10U | Operating Instructions - Page 68
of HDV, DVCAM, and DV Formats The HDV format is a HD VCR format based on the DV format of the globally widespread general consumer digital VCR system. This format has the newly defined data recording specifications for HD signals compressed by MPEG2. It applies the same cassette, tape speed - Sony HVRM10U | Operating Instructions - Page 69
MODE Recording tape format (AUDIO MODE) DVCAM (LOCK MODE) DV (LOCK MODE) DV (UNLOCK MODE) Dubbing with the HDV/DV jack When you perform dubbing between this unit and digital video equipment connected with the i.LINK cable using this unit as a player, the HDV/DV jack output format is determined - Sony HVRM10U | Operating Instructions - Page 70
is used as a recorder i.LINK input format HDV DVCAM Menu item VCR HDV/DV AUTO HDV DV AUTO HDV DV AUTO DV HDV DV REC MODE 1) - - - DVCAM DV SP - DVCAM DV SP DVCAM DV SP - DVCAM DV SP Recording tape format (AUDIO MODE) HDV (LOCK MODE) HDV (LOCK MODE) No recording DVCAM (Complies with input - Sony HVRM10U | Operating Instructions - Page 71
regardless of the player and recorder formats. • Some DV video equipment may be able to playback a DVCAM-formatted tape. Even if the tape is played back, the contents cannot be guaranteed. If you use a proper DVCAM-formatted tape for playback, a DVCAMformatted tape with a partially inaccurate - Sony HVRM10U | Operating Instructions - Page 72
may not be able operate with some i.LINK video equipment such as digital televisions, DVD recorders/players, and MICROMV recorders/players even if they are equipped with the i.LINK jack. Before connecting to another equipment, confirm whether this equipment is HDV/DVCAM (DV) compatible. For details - Sony HVRM10U | Operating Instructions - Page 73
Video recording format (HDV) Rotating dual-head helical scan Video recording format (DVCAM (DV)) Rotating dual-head helical scan Audio recording format (HDV) Rotating dual heads MPEG-1 Audio Layer2 16-bit 48 KHz (stereo) Transfer rate 384 kbps Audio recording format (DVCAM (DV)) Rotating - Sony HVRM10U | Operating Instructions - Page 74
Specifications Power consumption (when using a battery) when LCD is used HDV playback 6.5 W DVCAM/DV playback 5.7 W when LCD is not used HDV playback 5.7 W DVCAM/DV playback 4.9 W Operating temperature 5 ˚C to 40 ˚C (41 ˚F to 104 ˚F) Storage temperature -20 ˚C to 60 ˚C (-4 ˚F to 140 ˚F) 6.1 219.4 - Sony HVRM10U | Operating Instructions - Page 75
47 H HDV/DV jack 16, 38 HDV format 68 I i.LINK 72 Index 34 Index search 30 M Menu 45 Menu screen 19 Mini DV cassette 21 Mini DVCAM cassette 21 Moisture condensation 63 N Non Drop Frame 68 P Playback at various speeds 28 frame by frame 28 R Recording 31 Remaining tape time 19 Remote - Sony HVRM10U | Operating Instructions - Page 76
CONVERT 49 R REC MODE 49 REMAINING 52 REMOTE CTRL 53 T TC FORMAT 50 TC MAKE 51 TC PRESET 50 TC RUN 50 U UB PRESET 50 UB TIME REC 51 V VCR HDV/DV 48 W WORLD TIME 52 H HOURS METER 53 I i.LINK CONV 49 L LANGUAGE 52 LCD BL LEVEL 48 LCD COLOR 48 LETTER SIZE 52 Printed on 100
-
1 -
2 -
3 -
4 -
5 -
6 -
7 -
8
-
9
-
10
-
11
-
12
-
13
-
14
-
15
-
16
-
17
-
18
-
19
-
20
-
21
-
22
-
23
-
24
-
25
-
26
-
27
-
28
-
29
-
30
-
31
-
32
-
33
-
34
-
35
-
36
-
37
-
38
-
39
-
40
-
41
-
42
-
43
-
44
-
45
-
46
-
47
-
48
-
49
-
50
-
51
-
52
-
53
-
54
-
55
-
56
-
57
-
58
-
59
-
60
-
61
-
62
-
63
-
64
-
65
-
66
-
67
-
68
-
69
-
70
-
71
-
72
-
73
-
74
-
75
-
76
 |
 |
2005 Sony Corporation
2-549-780-
11
(1)
Digital HD
Videocassette
Recorder
HVR-M10U/M10N/M10E/M10P
Operating Instructions