Sony ICD-UX512 Operating Instructions - Page 114
Message List
UPC - 027242807624
View all Sony ICD-UX512 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 114 highlights
Message List Message Cause/Remedy HOLD • All the button operations are disabled because the IC recorder is in the HOLD status to prevent unintentional operations. Slide the HOLD/POWER switch towards the center to release the IC recorder from the HOLD status (page 10). Low Battery • The battery is exhausted. Replace the old LR03 (size AAA) alkaline battery with a new one. Or charge the rechargeable battery (page 11) or replace the old rechargeable battery with a new one. Memory Card Error • An error occurred while a memory card was being inserted into the memory card slot. Remove and try inserting it again. If this message persists, use a new memory card. Memory Card Not Supported • A memory card that the IC recorder does not support is inserted. See "About compatible memory cards" on page 36. Memory Card Locked • The memory card is write-protected. A write-protected memory card cannot be used with the IC recorder. Read Only Memory Card • A read-only memory card is inserted. A read-only memory card cannot be used with the IC recorder. Memory Card Access Denied • Since a memory card containing an access control function is inserted, you cannot use it. Memory Full • The remaining memory capacity of the IC recorder is insufficient. Erase some files before recording. File Full • When there are already the maximum number of files in the selected folder or the total number of files stored on the IC recorder has exceeded the maximum, you cannot record a new file. Erase some files before recording. 114GB