Sony ICF-CL75iP Operating Instructions - Page 11

Getting started, Checking the supplied items, Connecting the AM antenna and AC power cord (mains lead) - manuals

Page 11 highlights

Getting started Getting started Checking the supplied items Make sure that the following items are supplied: • FM/AM Clock Radio (1) • AM loop antenna (1) • Operating Instructions (this manual) (1) • Warranty (1) (In some countries or regions, the warranty is not supplied.) • Universal dock adaptor for iPhone (1) / iPhone 3G (1) (ICF-CL75iP only) • Sony CR2032 lithium battery (1) (In some countries or regions, the lithium battery is already set in the unit.) Connecting the AM antenna and AC power cord (mains lead) 1 Remove only the loop part from the plastic stand. 2 Set up the AM loop antenna. 3 Connect the cords to the AM antenna terminals. Push down and hold the terminal clamp and insert the cord. • Cord (A) or cord (B) can be connected to either terminal. 4 Make sure the AM loop antenna is connected firmly by pulling gently. Note • Do not place the AM loop antenna near the unit or other AV equipment, as noise may result. • The shape and the length of the antenna is designed to receive AM signals. Do not dismantle or roll up the antenna. Tip • See page 16 about determining the place for the antenna and its orientation for good reception. 5 Connect the AC power cord to the wall outlet (wall socket). • The clock screen in the default setting appears. 11US

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32

11
US
Getting started
Checking the supplied
items
Make sure that the following items are supplied:
• FM/AM Clock Radio (1)
• AM loop antenna (1)
• Operating Instructions (this manual) (1)
Warranty (1) (In some countries or regions, the
warranty is not supplied.)
Universal dock adaptor for iPhone (1) / iPhone
3G (1) (ICF-CL75iP only)
• Sony CR2032 lithium battery (1) (In some
countries or regions, the lithium battery is
already set in the unit.)
Connecting the AM
antenna and AC power
cord (mains lead)
1
Remove only the loop part from the
plastic stand.
2
Set up the AM loop antenna.
3
Connect the cords to the AM antenna
terminals.
• Cord (A) or cord (B) can be connected to
either terminal.
4
Make sure the AM loop antenna is
connected firmly by pulling gently.
Note
• Do not place the AM loop antenna near the unit or
other AV equipment, as noise may result.
• The shape and the length of the antenna is designed to
receive AM signals. Do not dismantle or roll up the
antenna.
Tip
• See page 16 about determining the place for the
antenna and its orientation for good reception.
5
Connect the AC power cord to the wall
outlet (wall socket).
• The clock screen in the default setting
appears.
Getting started
Push down and hold
the terminal clamp
and insert the cord.