Sony ICF-SW7600GR Operating Instructions - Page 25
Searching available stations from presets - Memory scan tuning - sensitivity
UPC - 027242580084
View all Sony ICF-SW7600GR manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
Searching available stations from presets - Memory scan tuning To stop memory scan during operation Press SCAN while memory scan is in operation. When there are no stations available If no stations are received after scanning, the unit will return to the preset number where the scan was started and two short beeps will be heard. When you press SCAN for a page with no presets Two short beeps sound, "- - - -" is displayed and the unit will return to the previous state. Tips • Scanning works faster if you preset frequencies in descending or ascending order in preset number orders. • When scanning at night when reception is intense or when scanning under prevalent interference, the unit may stop scanning to null broadcasts frequently. In this case, set the ATT switch to ON, and adjust the ATT control (see "To adjust the reception sensitivity for scanning", page 21). Under normal conditions, set the ATT switch to OFF. Note Many international broadcasts for short wave have limited broadcast hours. Due to this, the unit may not be able to tune in to the station outside the broadcast hours, or the unit may tune in to another station such as the local station of your area, etc. Listening to the radio 25GB