Sony ICS-SP20 User Manual

Sony ICS-SP20 Manual

Get Sony ICS-SP20 PDF manuals and user guides View all Sony ICS-SP20 manuals
Add to My Manuals
Save this manual to your list of manuals

Sony ICS-SP20 manual content summary:

  • Sony ICS-SP20 | User Manual - Page 1
    ICS-SP20 for Sony User Manual Manual# 050301 Model: ICS-SP20 205 Commercial Court Morganville, NJ 07751 www.auroramultimedia.com
  • Sony ICS-SP20 | User Manual - Page 2
    ICS-SP20 User Manual TABLE OF CONTENT 1 INTRODUCTION ...2 2 SUPPORTED IR TRANSMITTER(S) AND BASIC KEY FUNCTIONS 2 3 QUICK START GUIDE ...3 4 SONY DISPLAY SETTINGS...3 5 LED FUNCTIONS ...4 6 CONNECTIONS ...5 6.1 A/V & CONTROL CONNECTORS ...5 6.2 RF CONNECTOR ...5 6.3 RJ11 SERVICE PORT CONNECTOR...5
  • Sony ICS-SP20 | User Manual - Page 3
    ICS-SP20 User Manual 1 Introduction The ICS-SP20 is a high quality TV Tuner/Scaler. The ICS-SP20 supports advanced functionality, like video format /scan rate conversions, audio effects, Closed Captioning decoding and output, V-Chip functions, cloning capabilities (using the control port), Sleep
  • Sony ICS-SP20 | User Manual - Page 4
    Sony display. ICS-SP20 Monitor Selection The ICS-SP20 has a setting for which Sony display you are using with your TV tuner device. Enter the menu for the ICS-SP20 and under General Settings, select the correct model of your Sony display. Normally it should auto detect the model but has a manual
  • Sony ICS-SP20 | User Manual - Page 5
    packets or not. This does not mean that ICS-SP20 recognizes any IR command. Lower LED: • Switches ON when a control packet is sent to Sony Display Panel. The upper LED has also another purpose - if the ICS-SP20 encounters an internal irrecoverable error, it stops all activities and starts blinking
  • Sony ICS-SP20 | User Manual - Page 6
    RF connector The coaxial connector (ANT) of ICS-SP20 is RF signal input - either aerial or cable TV, UHF/VHF, if the ICS-SP20 shall be used as TV tuner. 6.3 RJ11 Service Port connector RJ11 connector of ICS-SP20 is used as a service port for Sony. Nothing should be connected to this port. Warning
  • Sony ICS-SP20 | User Manual - Page 7
    ICS-SP20 User Manual 7 Operating the ICS-SP20 The ICS-SP20 has many advanced features to enhance the typical viewing and usability of a TV Tuner. To select the ICS-SP20 use the Sony remote to select the Option card slot YPbPr. A user can switch the unit on or off, control volume level, switch the
  • Sony ICS-SP20 | User Manual - Page 8
    ICS-SP20 User Manual Keys: 0-9 Dialog: "SWITCH TO" - enter new channel number, several digits can be entered if necessary. Channel is switched to after a 3 seconds timeout (since the most recent digit is entered) or after pressing TV allows a user to control various aspects of ICS-SP20 configuration.
  • Sony ICS-SP20 | User Manual - Page 9
    ICS-SP20 User Manual 7.3 General Settings This menu allows control of various "general" aspects of ICS-SP20 behavior. Note that the *-marked options are accessible only in Service mode, and not in Stand-alone mode. A/V Input Current time Sleep timer - Allows user to select the audio/video input
  • Sony ICS-SP20 | User Manual - Page 10
    ICS-SP20 User Manual 7.5 Audio Settings Volume -- Selects the current (default) volume level Spatial Effect -- Specifies the strength of 3D-spatial effect 7.6 Tuner Settings Default Chan -- Specifies the default channel, which will be selected upon ICS-SP20 when the ICS-SP20 is switched tuner
  • Sony ICS-SP20 | User Manual - Page 11
    - Allows user to make an association between a channel number and the AV inputs. 7.7 Panel Settings This menu controls various aspects of interaction with Sony display. This menu is accessible in Service mode only (not in Stand-alone). All these parameters do not affect behavior of ICS-SP20, they
  • Sony ICS-SP20 | User Manual - Page 12
    ICS-SP20 User Manual Orbit Enable Orbit Range Orbit Cycle -- Allows the enabling of Orbit mode on a per channel basis. -- Selects how much orbit movement will occur. -- Determines how often it will orbit. 7.8 CC Settings This menu control can be viewed using the TV. Content rated above the setting
  • Sony ICS-SP20 | User Manual - Page 13
    to default values. 7.10 Troubleshooting Symptom Key on remote is pressed but nothing happens Image is Green No control of the display via Menus No Image Cannot switch to a particular TV channel using channel +/browse keys. Checks See if the upper LED of ICS-SP20 is fast-blinking while pressing
  • Sony ICS-SP20 | User Manual - Page 14
    ICS-SP20 User Manual 8 Specifications 8.1 Applicable signals Color system: NTSC (RF and AV inputs) Scanning format: 525i (480i), 525p (480p) Receiving RF signals - US Standard Air, US Standard Cable, Cable HRC, Cable IRC Supported audio standards: auto-detection, BTSC-STEREO, BTSC-MONO+SAP 8.2
  • Sony ICS-SP20 | User Manual - Page 15
    ICS-SP20 User Manual 9 Limited Warranty Aurora in accordance with procedures specified in operating instructions: or, C) The product has been repaired purchased equipment. No warranty service performed on any product to Identify and Resolve Radio-TV Interference Problems." This booklet is available
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
ICS-SP20 for Sony
User Manual
Manual# 050301
Model: ICS-SP20
205 Commercial Court
Morganville, NJ 07751
www.auroramultimedia.com