Sony KDF-E42A11E Operating Instructions - Page 26
Features menu
View all Sony KDF-E42A11E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 26 highlights
Features menu Features AV2 Output TV TV Speakers On PC Adjustment You can select the options listed below on the Features menu. To select options, see "Navigating through menus" (page 19). Select: Set: OK Back: End: MENU AV2 Output Sets a signal to be output through the socket labelled / 2 on the rear of the TV. If you connect a VCR to the / 2 socket, you can then record from the equipment connected to other sockets of the TV. 1 Press OK to select "AV2 Output". 2 Press m/M to select one of the following, then press OK. • D-TV: Outputs a digital broadcast. • A-TV: Outputs an analogue broadcast. • AV1: Outputs signals from equipment connected to the / 1 socket. • AV4: Outputs signals from equipment connected to the 4/ 4 socket. • Auto: Outputs whatever is being viewed on the screen. TV Speakers Turns off the TV speakers e.g. to listen to the sound through external audio equipment connected to the TV. 1 Press OK to select "TV Speakers". 2 Press m/M to select one of the following, then press OK. • On: the sound is output from the TV speakers. • One Time Off: the TV speakers are temporarily turned off allowing you to listen to the sound from external audio equipment. Tip The "TV speakers" option automatically returns to "On" when the TV set is switched off. • Permanent Off: the TV speakers are permanently turned off allowing you to listen to the sound from external audio equipment. Tip To turn on the TV speakers again, change to on. 26 GB