Sony KDF-E42A11E Operating Instructions - Page 33
Using the Menu
View all Sony KDF-E42A11E manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
Using the Menu Option Audio Filter Skip Decoder ATT Description Improves the sound for individual channels in the case of distortion in mono broadcasts. Sometimes a non-standard broadcast signal can cause sound distortion or intermittent sound muting when watching mono programmes. 1 Press M/m to select "Low" or "High", then press OK. If you do not experience any sound distortion, we recommend that you leave this option set to the factory setting "Off". 2 Press OK to select "Confirm", then press OK. Note You cannot receive stereo or dual sound when "Low" or "High" is selected. Skips unused analogue channels when you press PROG +/- to select channels. (You can still select a skipped channel using the number buttons.) 1 Press M/m to select "Yes", then press OK. 2 Press OK to select "Confirm", then press OK. To restore a skipped channel, select "No" in step 1. Records the scrambled channel selected when using a decoder connected to the scart connector / 2 either directly or via a VCR. Note Depending on the country/region selected for "Country" (page 29), this option may not be available. 1 Press M/m to select "On", then press OK. 2 Press OK to select "Confirm", then press OK. To cancel this function afterwards, select "Off" in step 1. Attenuates the RF signal. In case of a strong RF signal, some video interference may be displayed. 1 Press m/M to select "On", then press OK. 2 Press OK to select "Confirm", then press OK. Tip This option cannot be used if "AV2 Output" is set to "D-TV" (page 26) Continued 33 GB