Sony KDL-40SL140 Operating Instructions - Page 13

Getting Started Item 1 VIDEO IN 1 S VIDEO Description Connects to the S VIDEO output jack of your DVD or other video equipment that has S VIDEO which provides better picture quality than composite video. The S VIDEO does not provide sound; you will need to connect the audio cables. VIDEO IN 1/2/3 VIDEO/ L(MONO)AUDIO-R Connects to the composite video and audio output jacks on your A/V equipment such as a DVD player or other video equipment. VIDEO IN 2 input is located on the left side panel of the TV. 2 COMPONENT Connects to your DVD player's or digital set-top box's component video (YPBPR) and audio IN 1/2 (1080i/ (L/R) jacks. Component video provides better picture quality than the S VIDEO or the 720p/480p/480i)/ composite video connections (1). L-AUDIO-R 3 PC IN (RGB/AUDIO) Connects to a personal computer's video output connector using an HD15-HD15 cable (analog RGB, not supplied). See "PC Input Signal Reference Chart" on page 16 for the signals that can be displayed. • For some Apple Macintosh computers, it may be necessary to use an adapter (not supplied). If this is the case, connect the adapter to the computer before connecting the HD15-HD15 cable. 4 HDMI IN 1/2/3/4 HDMI (High-Definition Multimedia Interface) provides an uncompressed, all-digital R-AUDIO-L audio/video interface between this TV and any HDMI-equipped A/V equipment. HDMI supports enhanced, or high-definition video, plus digital audio. If the equipment has a DVI jack and not an HDMI jack, connect the DVI jack to any HDMI IN (with DVI-to-HDMI cable or adapter) jack, and connect the audio jack to the AUDIO IN (L/R) jacks below the HDMI IN 4. DVI-to-HDMI cable DVI-to-HDMI adapter Audio cable • Be sure to use only an HDMI cable that bears the HDMI logo. • When connecting a DVI-equipped PC to an HDMI jack, also connect an Audio cable between the PC and R-AUDIO-L jack. • The HDMI input has been fitted to suit A/V equipment such as DVD players for 480i, 480p, 720p, 1080i and 1080p signals. PC generated signals may not be rendered as expected due to scaling factors. For better PC view, use the PC IN (RGB IN) input. Note that this TV displays all video input signals in a resolution of 1,920 dots × 1,080 lines. 5 DIGITAL AUDIO Connects to the optical audio input of a digital audio equipment that is PCM compatible. OUT (OPTICAL) 6 AUDIO OUT (VAR/FIX) L-AUDIO-R Connects to the left and right audio input jacks of your audio or video equipment. You can use these outputs to listen to your TV's audio through your stereo system. 7 CABLE/ ANTENNA • Audio Out level is VARIABLE while Speakers are On, when Speakers control is turn Off the level in the Audio Out is FIXED (see page 31). RF input that connects to your cable or VHF/UHF antenna. • Component video (YPBPR) connection are necessary to view 480i, 480p, 720p and 1080i video formats. • HDMI input supports signals up to 1080p. • 1080p format can only be supported through HDMI inputs. • This TV displays all video input signals in a resolution of 1,920 dots × 1,080 lines. 13