Sony KDL-40SL140 Operating Instructions - Page 16

PC Use the TV as a monitor for your PC by connecting an HD15-HD15 cable as shown below. This TV can also be connected to a PC with a DVI or HDMI output. (Refer to the separate Quick Setup Guide.) Rear of TV VIDEO IN 1 3 S VIDEO VIDEO L (MONO) AUDIO R COMPONENT IN PC IN 1 2 Y RGB PB IN DIGITAL 1 AUDIO OUT (OPTICAL) 3 PR L AUDIO R AUDIO (1080i/720p/480p/480i) 4 AUDIO OUT R AUDIO L L AUDIO R (VAR/FIX) HD15-HD15 cable (analog RGB) Audio cable (stereo mini plugs) ~ • Connect the PC IN jack to the PC using an HD15-HD15 cable with ferrite core (analog RGB) and audio cable (page 13). • The PC IN does not support 1080p format. PC Input Signal Reference Chart After connecting the PC to the TV, set the output signal from the PC according to the chart below. Signals VGA SVGA XGA WXGA ~ Resolution Horizontal × Vertical (Pixel) (Line) 640 × 480 640 × 480 800 × 600 800 × 600 1,024 × 768 1,024 × 768 1,024 × 768 1,280 × 768 1,360 × 768 Horizontal frequency (kHz) 31.5 37.5 37.9 46.9 48.4 56.5 60.0 47.8 47.7 Vertical frequency (Hz) 60 75 60 75 60 70 75 60 60 Standard VGA VESA VESA Guidelines VESA VESA Guidelines VESA VESA VESA VESA • This TV's PC input does not support Sync on Green or Composite Sync. • This TV's PC VGA input does not support interlaced signals. • For the best picture quality, it is recommended to use the signals (boldfaced) in the above chart with a 60 Hz vertical frequency from a personal computer. In plug and play, signals with a 60 Hz vertical frequency will be detected automatically. (PC reboot may be necessary.) • 1080p format can only be supported through HDMI inputs. 16