Sony KDS-70Q006 Owners Guide

Sony KDS-70Q006 - 70" Qualia 006 Manual

Get Sony KDS-70Q006 - 70inch Qualia 006 PDF manuals and user guides View all Sony KDS-70Q006 manuals
Add to My Manuals
Save this manual to your list of manuals

Sony KDS-70Q006 manual content summary:

  • Sony KDS-70Q006 | Owners Guide - Page 1
  • Sony KDS-70Q006 | Owners Guide - Page 2
  • Sony KDS-70Q006 | Owners Guide - Page 3
  • Sony KDS-70Q006 | Owners Guide - Page 4
    Owner's Record The model and serial numbers are located at the rear of the SXRD projection TV, below the Sony logo, on the sticker, and also on the TV box (white label). Record these numbers in the spaces provided below. Refer to them whenever you call upon your Sony dealer regarding this product.
  • Sony KDS-70Q006 | Owners Guide - Page 5
    the SXRD projection TV to rain or moisture. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN ATTENTION RISQUE DE CHOC ELECTRIQUE, NE PAS OUVRIR PRECAUCION RIESGO DE CHOQUE ELECTRICO NO ABRIR CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE
  • Sony KDS-70Q006 | Owners Guide - Page 6
    object should fall inside the cabinet, unplug the SXRD projection TV immediately and have it checked by qualified service personnel before operating it further. ❑ If you will not be using the SXRD projection TV for several days, disconnect the power by pulling the plug itself. Never pull on the
  • Sony KDS-70Q006 | Owners Guide - Page 7
    Before using your SXRD projection TV, please read these instructions completely, and keep this manual for future reference. Carefully observe and comply with all warnings, cautions and instructions placed on the set or described in the operating instructions or service manual. WARNING To guard
  • Sony KDS-70Q006 | Owners Guide - Page 8
    supplied cleaning cloth or a glass cleaning cloth. ❑ To remove hard contamination, use the supplied of SXRD projection TV. An inches (30 cm) 4 inches (10 cm) 4 inches (10 cm) Allow this much STD/DUO POWER space. Never install the unit as follows: Air circulation is blocked. less than 4 inches
  • Sony KDS-70Q006 | Owners Guide - Page 9
    When the set reaches the end of its useful life, ask a qualified service technician to dispose of the set. For Safety Be careful when moving the SXRD projection TV When you place the SXRD projection TV in position, be careful STD/DUO POWER not to drop it on your foot or fingers. Watch your
  • Sony KDS-70Q006 | Owners Guide - Page 10
    it at least 4 inches (10 cm) from the wall. ❑ Avoid installing the SXRD projection TV near a heater, etc. Projection lamp ❑ Your SXRD projection TV uses a projection lamp as its light source. It is time to replace the lamp with a new one (not supplied) when: • the lamp replacement indicator on the
  • Sony KDS-70Q006 | Owners Guide - Page 11
    block any ventilation slots. Install in accordance with the manufacturer's instructions. electrician for replacement of the obsolete outlet. 10) Protect the power cord servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power-supply
  • Sony KDS-70Q006 | Owners Guide - Page 12
  • Sony KDS-70Q006 | Owners Guide - Page 13
    Sony SXRD Projection TV Presenting the Sony SXRD Projection TV 13 Package Contents 13 Using This Manual 13 Features 14 Enjoying Your SXRD Projection TV 16 Notes on the SXRD Projection TV 17 Cleaning the Screen Surface 17 Attaching the Speakers 18 Replacing the Lamp 20 Setting Up the SXRD
  • Sony KDS-70Q006 | Owners Guide - Page 14
    View 74 Displaying Twin Pictures 74 Activating the Picture 74 Changing the Picture Size 76 Using Favorite Channels 77 Using the Channel Menu 77 Using the Favorite Channels Guide 88 Viewing Viewing Blocked Programs 119 Selecting Custom Rating Sony 129 Troubleshooting 129 Twin View 129 Remote
  • Sony KDS-70Q006 | Owners Guide - Page 15
    the Sony SXRD Projection TV Introducing the Sony SXRD Projection TV Presenting the Sony SXRD Projection TV Thank you for purchasing the Sony SXRD projection TV. This manual is for model KDS-70Q006. Package Contents Along with your new SXRD projection TV, the packing box contains a remote control
  • Sony KDS-70Q006 | Owners Guide - Page 16
    the Sony SXRD Projection TV Features Some of the features that you will enjoy with your new SXRD projection TV include: ❑ WEGA Engine™: Using the improved optical unit technology, Cinema Black Pro enables you to view images with the deeper contrast. ❑ BN Smoother™: Reduces the block noise caused by
  • Sony KDS-70Q006 | Owners Guide - Page 17
    Introducing the Sony SXRD Projection TV Introducing the Sony SXRD Projection TV ❑ Memory Stick Viewer: Allows you to view digital photos (JPEG) and movies (MPEG1) from Memory Stick media on your SXRD projection TV screen. ❑ Parental Control: V-Chip technology allows parents to block unsuitable
  • Sony KDS-70Q006 | Owners Guide - Page 18
    dark. Replace the lamp with a new Sony XL-5000 replacement lamp (not supplied). ✍ After replacing the lamp, be sure to attach the lamp cover securely; otherwise, your SXRD projection TV will not turn on. For details on lamp replacement, see "Replacing the Lamp" on page 20. ✍ The light emitted from
  • Sony KDS-70Q006 | Owners Guide - Page 19
    Introducing the Sony SXRD Projection TV Introducing the Sony SXRD Projection TV Notes on the SXRD Projection TV To enjoy clear pictures ❑ Prevent sunlight or other light sources from shining directly onto the screen. ❑ The screen surface is easily scratched. Do not rub, touch, or tap it with a
  • Sony KDS-70Q006 | Owners Guide - Page 20
    speaker upright. Insert the metal hook located on the top of the speaker into the slot on the rear of the TV (upper right-hand corner) and slowly move the speaker closer to the TV. Rear of SXRD projection TV Slot Metal hook Screw Left speaker 2 Locate the black pin near the center of the speaker
  • Sony KDS-70Q006 | Owners Guide - Page 21
    Introducing the Sony SXRD Projection TV Introducing the Sony SXRD Projection TV 3 Insert the four screws pre-attached to the speaker into the screw holes on the rear of the TV, turn the screws clockwise, and tighten them to secure the speaker to the TV. Rear of SXRD projection TV Black pin 4
  • Sony KDS-70Q006 | Owners Guide - Page 22
    in injury or death. Be sure to follow the instructions below. ❑ Use a Sony XL-5000 replacement lamp (not supplied) for replacement. Use of any other lamp may damage the SXRD projection TV. ❑ Do not remove the lamp for any purpose other than replacement. Doing so may cause injury or fire. ❑ Before
  • Sony KDS-70Q006 | Owners Guide - Page 23
    the Sony SXRD Projection TV 1 Turn off the power on the main unit. Wait several minutes, then unplug the power cord. (The cooling fan will continue to operate for about two minutes after turning the power off.) 2 Wait at least 30 minutes after unplugging the power cord to allow the lamp to
  • Sony KDS-70Q006 | Owners Guide - Page 24
    the Sony SXRD Projection TV 4 Pull out the lamp. Loosen the screw on the lamp cover with a coin or similar object and slide the knob to the left. Put fingers on the right edge of the cover and pull it forward to remove the cover. Pull forward with fingers Loosen the two screws that hold the lamp
  • Sony KDS-70Q006 | Owners Guide - Page 25
    the cover. STD/DUO POWER Press firmly. ✍ Consult your Sony dealer for a Sony XL-5000 replacement lamp. ✍ Take great care when replacing the lamp or plugging in/unplugging the connecting cords. Rough handling may cause the SXRD projection TV to fall, damaging the TV, the TV stand and/or the
  • Sony KDS-70Q006 | Owners Guide - Page 26
  • Sony KDS-70Q006 | Owners Guide - Page 27
    Camcorder Audio Receiver Digital Cable Box Digital Satellite Receiver Digital Satellite Receiver with an HDMI Connector Connecting a Device with an Optical IN Connector Using the Control S Feature Using CableCARD Setting Up the SXRD Projection TV Channel List Page(s) 26 30 34 39 40 40 41 42 44 45
  • Sony KDS-70Q006 | Owners Guide - Page 28
    "Replacing the Lamp" on page 20. When lit in red, indicates that i.LINK Standby is on. For details, see page 123. When lit, indicates that the Memory Stick is being read. (Do not remove the Memory Stick when the indicator is lit.) For inserting Memory Stick media to view on your SXRD projection TV
  • Sony KDS-70Q006 | Owners Guide - Page 29
    channels. Press to adjust the volume. Press to select between the TV's tuner and other video equipment inputs. Front and Rear Panel Connectors Front Panel of SXRD projection TV Setting Up the SXRD Projection TV STD/DUO POWER i.LINK S400 VIDEO 2 INPUT TS/DV/MICROMV/HDV S VIDEO VIDEO L (MONO
  • Sony KDS-70Q006 | Owners Guide - Page 30
    the supplied power cord. 7 CONTROL S IN/OUT To control other Sony equipment with the SXRD projection TV's remote control, connect the CONTROL S IN jack of the equipment to the CONTROL S OUT jack on the SXRD projection TV with the CONTROL S cable. To control the SXRD projection TV with the remote
  • Sony KDS-70Q006 | Owners Guide - Page 31
    such as a set-top box, DVD player, and A/V receiver. HDMI supports enhanced, or high-definition video, plus two-channel digital audio. You can also connect a DVIequipped device to your SXRD projection TV by using an HDMI-DVI cable. 9 DIGITAL AUDIO (OPTICAL) OUT (PCM/DOLBY* DIGITAL) Connects to the
  • Sony KDS-70Q006 | Owners Guide - Page 32
    Setting Up the SXRD Projection TV Installing the SXRD Projection TV Carrying Your SXRD Projection TV Carrying the SXRD projection TV requires at least four people. Do not hold by the pedestal or the Front Panel Cover of the SXRD projection TV. Doing so may cause these parts to break off. To carry
  • Sony KDS-70Q006 | Owners Guide - Page 33
    projection TV as follows. Using the SXRD projection TV stand with support belts ❑ Sony strongly recommends using the TV stand designed for your SXRD projection TV, model SU-SX10 (not supplied). When Installing Your SXRD Projection TV Against a Wall Keep your SXRD projection TV at least 4 inches
  • Sony KDS-70Q006 | Owners Guide - Page 34
    Setting Up the SXRD Projection TV Recommended Viewing Area Your viewing position may affect the picture quality. For the best picture quality, install your SXRD projection TV within the areas shown below. Horizontal Viewing Area POWER STD/DUO 65˚ mmini.n8. 6ft..6(aftp. p(arpopxr.o2x.4.~22.0.5mm
  • Sony KDS-70Q006 | Owners Guide - Page 35
    Setting Up the SXRD Projection TV Connecting the Power Cord Setting Up the SXRD Projection TV ✍ Complete other connections before connecting the power cord. 1 Connect the AC power cord (supplied) to the AC IN connector of the TV. 2 Connect the other end of the power cord to a wall outlet. AC IN
  • Sony KDS-70Q006 | Owners Guide - Page 36
    Basic Connections: Connecting a Cable or Antenna The way in which you connect your SXRD projection TV will vary, depending on how your home receives a signal (cable, cable box, antenna) and whether or not you plan to connect a VCR. If You Are
  • Sony KDS-70Q006 | Owners Guide - Page 37
    in older homes) Cable Type Connect As Shown VHF Only or UHF Only or combined VHF/UHF 300-ohm twin lead cable Rear of SXRD Projection TV VHF/UHF Antenna connector (not supplied) 75-ohm coaxial and 300-ohm twin lead cable (found in some homes) Cable Type Connect As Shown VHF and UHF 75
  • Sony KDS-70Q006 | Owners Guide - Page 38
    cable CATV cable Notes on Using This Connection To Do This ... Switch the SXRD projection TV's input between the cable and antenna Do This ... Press ANT to switch back and forth between the SXRD projection TV's VHF/UHF and CABLE inputs. ✍ For optimum picture quality, a 75-ohm coaxial cable
  • Sony KDS-70Q006 | Owners Guide - Page 39
    remote control to change channels coming directly into the SXRD projection TV's VHF/UHF input jack. CATV cable IN OUT Cable box Antenna Cable Coaxial cable VHF/UHF CABLE Rear of SXRD projection TV ✍ This connection will allow you to take advantage of dual picture features such as Twin View
  • Sony KDS-70Q006 | Owners Guide - Page 40
    the cable box Control" on page 64. Activate the remote control to operate the cable Press FUNCTION repeatedly until the SAT/CABLE indicator box lights up. Prevent the accidental switching of TV channels When using the cable box, the SXRD projection TV must stay on the channel the cable box is
  • Sony KDS-70Q006 | Owners Guide - Page 41
    Setting Up the SXRD Projection TV Setting Up the SXRD Projection TV Connecting Optional Equipment Use the Cable Box Digital Satellite Receiver Digital Satellite Receiver with an HDMI Connector Connecting a Device with an Optical IN Connector Using the CONTROL S Feature Using CableCARD See Page
  • Sony KDS-70Q006 | Owners Guide - Page 42
    S VIDEO carries only the video signal, you also need to connect audio cables for sound, as shown below. Example of an S VIDEO Connection Rear of SXRD projection TV S VIDEO cable Equipment with S VIDEO Cables are often color-coded to connectors. Connect red to red, white to white, etc. Audio cable
  • Sony KDS-70Q006 | Owners Guide - Page 43
    SXRD Projection TV VCR and Cable Setting Up the SXRD Projection TV Use this hookup if: ❑ You have cable TV that does not require a cable box. Disconnect all power VIDEO OUT jacks to the SXRD projection TV's AUDIO and S VIDEO IN jacks. Rear of SXRD projection TV Splitter CATV Cable VCR Coaxial
  • Sony KDS-70Q006 | Owners Guide - Page 44
    View feature. With this setup you can: ❑ Use the SXRD projection TV's remote control to change channels on your cable box when the signal is scrambled. To program your Sony remote sent to the SXRD projection TV, so you cannot use the Twin View feature.) Disconnect all power sources before making any
  • Sony KDS-70Q006 | Owners Guide - Page 45
    connecting a digital cable box, you will need a special bidirectional splitter designed to work with your cable box. Splitter Coaxial cable Rear of SXRD projection TV VIDEO AUDIO-L AUDIO-R A/V cable CATV cable A/V cable S VIDEO cable VCR Coaxial cable Coaxial cable Cable box ✍ If your VCR
  • Sony KDS-70Q006 | Owners Guide - Page 46
    cable A/V cable ✍ To perform tape editing, set the SXRD projection TV to the video input intended for playback by pressing TV/VIDEO on the remote control. ✍ You may need to change the video input on your VCR. See your VCR's operating manual for instructions. ✍ If your VCRs have S VIDEO jacks: For
  • Sony KDS-70Q006 | Owners Guide - Page 47
    Setting Up the SXRD Projection TV Satellite Receiver Setting Up the SXRD Projection TV Disconnect all power sources before making any connections. a VIDEO cable (yellow) instead of the S VIDEO cable. Rear of SXRD projection TV S VIDEO VIDEO AUDIO-L AUDIO-R Satellite receiver A/V cable S VIDEO
  • Sony KDS-70Q006 | Owners Guide - Page 48
    the SXRD Projection TV Satellite Receiver with a VCR and Cable Disconnect all power sources before making any connections. 1 Connect the CATV cable to the single (input) jack of the splitter. 2 Using a coaxial cable, connect one of the splitter's two output jacks to the SXRD projection TV's CABLE
  • Sony KDS-70Q006 | Owners Guide - Page 49
    Up the SXRD Projection TV CATV cable Splitter Coaxial cable Rear of SXRD projection TV Setting Up the SXRD Projection TV Satellite Be sure your VCR's video input is set correctly. See your VCR's operating manual for instructions. ✍ If your VCR or satellite receiver is not equipped with S VIDEO,
  • Sony KDS-70Q006 | Owners Guide - Page 50
    same row of inputs that you used for the video connection (HD/DVD IN 4 or 5). Rear of SXRD projection TV Y Component video cable PB PR DVD player 48 Cables are often color-coded to connectors. Connect to 16:9. For details, refer to the operating instructions supplied with your DVD player.
  • Sony KDS-70Q006 | Owners Guide - Page 51
    all power sources before making any connections. 1 Using an audio cable, connect the DVD player's AUDIO OUT jacks to the SXRD projection TV's AUDIO IN jacks. 2 Using a S VIDEO cable, connect the DVD player's S VIDEO jack to the SXRD projection TV's S VIDEO jack. Rear of SXRD projection TV DVD
  • Sony KDS-70Q006 | Owners Guide - Page 52
    SXRD Projection TV Camcorder Disconnect all power sources before making any connections. For easy connection of the camcorder, the SXRD projection TV has front audio and video inputs (shown below). However, if you prefer, you can also connect the camcorder to the SXRD projection TV's rear AUDIO
  • Sony KDS-70Q006 | Owners Guide - Page 53
    power sources before making any connections. Using an audio cable, connect the SXRD projection TV's AUDIO OUT (VAR/FIX) jacks to the audio receiver's audio LINE IN jacks. ✍ AUDIO OUT jacks are operable only when the TV's Speaker is set to Off. For details, see page 113. Rear of SXRD projection TV
  • Sony KDS-70Q006 | Owners Guide - Page 54
    power sources before making any connections. 1 Using a component video cable, connect the digital cable box's Y, PB and PR jacks to the SXRD projection TV's Y, PB and PR jacks. Use the HD/DVD IN 4 or 5 input. ✍ Component video (Y, PB, PR) connection is necessary to view Rear of SXRD projection TV
  • Sony KDS-70Q006 | Owners Guide - Page 55
    Disconnect all power sources before making any connections. 1 Using a component video cable, connect the digital satellite receiver's Y, PB and PR jacks to the SXRD projection TV's Y, PB and PR jacks. Use the HD/DVD IN 4 or 5 input. ✍ Component video (Y, PB, PR) connection is necessary to view 480p
  • Sony KDS-70Q006 | Owners Guide - Page 56
    -Definition Multimedia Interface (HDMI). Disconnect all power sources before making any connections: Using an HDMI cable (not supplied), connect the digital satellite receiver's HDMI OUT jack to the SXRD projection TV's HDMI IN jack. Use the HDMI IN 6 or 7 input. z The HDMI jack provides both video
  • Sony KDS-70Q006 | Owners Guide - Page 57
    an HDMI-DVI cable is used. ✍ Use only the HDMI IN 6 input for this connection. If the HDMI IN 7 input is used for this connection, the AUDIO IN jacks in HDMI IN 6 become unavailable. Cables are often color-coded to connectors. Connect red to red, white to white, etc. Rear of SXRD projection TV IN
  • Sony KDS-70Q006 | Owners Guide - Page 58
    digital compatible, such as an audio amplifier. Using an optical audio cable, connect the device's OPTICAL IN jack to the SXRD projection TV's DIGITAL AUDIO (OPTICAL) OUT jack. Rear of SXRD projection TV IN AUDIO OUT (VAR/FIX) The DIGITAL AUDIO (OPTICAL) OUT jack is available only when a digital
  • Sony KDS-70Q006 | Owners Guide - Page 59
    Setting Up the SXRD Projection TV Setting Up the SXRD Projection TV Using the CONTROL S Feature CONTROL S allows you to control your SXRD projection TV system and other Sony equipment with one remote control. In addition to allowing you to control multiple devices with one remote control, the
  • Sony KDS-70Q006 | Owners Guide - Page 60
    your cable TV company for CableCARD service details, limitations, pricing, and availability, all of which are determined by your cable TV company - not Sony. Activating CableCARD Service Before you can use CableCARD service, you need to insert the CableCARD (supplied by your cable TV company) and
  • Sony KDS-70Q006 | Owners Guide - Page 61
    CableCARD in the Applications Menu (see page 126). Setting Up the SXRD Projection TV 2 Gently push the card into the slot until it locks into TV company will request before they can activate your service. 4 Follow the displayed instructions: Phone your cable TV company. A representative will guide
  • Sony KDS-70Q006 | Owners Guide - Page 62
    Up the SXRD Projection TV Setting Up the SXRD Projection TV Channel List After you finish connecting the TV, you need to run the Initial Setup feature, which automatically creates a list of available analog and digital channels. The Initial Setup screen appears when you turn on your TV for the
  • Sony KDS-70Q006 | Owners Guide - Page 63
    Control Overview The table on the next page describes the buttons on the remote control. Inserting Batteries into the Remote Control Insert two size AA (R6) batteries (supplied) by matching the e and E on the batteries to the diagram inside the battery compartment. e E eE Coin Lock ✍ To avoid
  • Sony KDS-70Q006 | Owners Guide - Page 64
    on SAT/CABLE, press to display index of your satellite program provider. Press to adjust the volume. Press to turn on and off the SXRD projection TV and other audio/video equipment you have programmed into the remote control. For instructions, see "Programming the Remote Control" on page 64. 62
  • Sony KDS-70Q006 | Owners Guide - Page 65
    to reset the settings to the factory defaults. Press to cycle through the video equipment connected to your SXRD projection TV's video inputs: TV, VIDEO 1, VIDEO 2, VIDEO 3, VIDEO 4, VIDEO 5, VIDEO 6 and VIDEO 7. Press once to display the current time and channel label (if set) and channel number
  • Sony KDS-70Q006 | Owners Guide - Page 66
    Function DVD/VCR SAT/CABLE i.LINK Equipment Sony DVD player Sony Satellite Receiver Sony DVD player (i.LINK) Programmable Code Number 751 801 901 If you have video equipment other than Sony brand that you want to control with the SXRD projection TV's remote control, use the following procedure to
  • Sony KDS-70Q006 | Owners Guide - Page 67
    , 331, 332 314, 330, 336, 337 331 Laserdisc Players Manufacturer Code Sony 701 Panasonic 704, 710 Pioneer 702 DVD Players Function Sony Sony (i.LINK) General Electric Code 751 901 755 Using the Remote Control Hitachi 758 JVC 756 Magnavox 757 Mitsubishi 761 Oritron 759 Panasonic
  • Sony KDS-70Q006 | Owners Guide - Page 68
    Control Using Other Equipment with Your SXRD Projection TV Remote Control To operate other connected equipment with your SXRD projection TV remote control, first turn to page 65 and program the necessary code. For operating video equipment, press TV/VIDEO repeatedly until you see the video input
  • Sony KDS-70Q006 | Owners Guide - Page 69
    a channel Change channels Back to previous channel Press FUNCTION repeatedly until the SAT/CABLE indicator lights up. SAT/CABLE 0-9, ENTER CH +/- JUMP Operating a DVD Player To Do This ... Activate the remote control to operate the DVD Turn on/off Play Press FUNCTION repeatedly until the DVD/VCR
  • Sony KDS-70Q006 | Owners Guide - Page 70
  • Sony KDS-70Q006 | Owners Guide - Page 71
    Mode Using Twin View Using Favorite Channels Using the Freeze Function Page 69 70 72 74 77 79 To Do This ... Activate the remote control to operate the TV Turn on/off the TV Tune directly to a channel Do This ... Press FUNCTION repeatedly until the TV indicator lights up. Press POWER. To tune to
  • Sony KDS-70Q006 | Owners Guide - Page 72
    buttons. 2 Press GUIDE on the SXRD projection TV's remote control. The program guide will appear with the currently selected program showing in the background. Channel number, call letters, etc. Program title and description, program duration, time remaining, rating information, closed-caption
  • Sony KDS-70Q006 | Owners Guide - Page 73
    select channels from a dropdown list. The Guide provides information about the current program being shown on each channel. Make Way for Ducks! Series follows the aquatic misadventures of Henry and Riley, two wayward ducks on a unique mission. Time remaining: 1:26 TV-G CC 1 ABC 10 DISC 23
  • Sony KDS-70Q006 | Owners Guide - Page 74
    Using the Features Using Wide Screen Mode z You can also access the screen mode settings in the Screen menu. For details, see page 114. Wide screen mode lets you watch 4:3 normal broadcasts in several wide screen modes (16:9 aspect ratio). ❑ Press WIDE repeatedly to toggle through the following
  • Sony KDS-70Q006 | Owners Guide - Page 75
    . Using the Features Full m Zoom enlarges the picture proportionately, both vertically and horizontally. Zoom ✍ When the TV receives a 720p or 1080i signal, Normal cannot be selected. ✍ When TV receives a 720p or 1080i signal that is 4:3 aspect ratio picture (upconverted to 16:9) with a black bar
  • Sony KDS-70Q006 | Owners Guide - Page 76
    is selected. You can also change the relative size of each of the pictures. Displaying Twin Pictures To display Twin View 1 Make sure your SXRD projection TV is tuned to a working channel. 2 Press . A second picture appears. The active picture is highlighted. , C8.1 FOX Video 1 DVD Activating
  • Sony KDS-70Q006 | Owners Guide - Page 77
    the HD/DVD IN 4-5, and HDMI IN 6-7 inputs display in the left window, but not the right. ❑ If you are viewing a 4:3 source and a 16:9 enhanced source (such as a DVD) side by side, the 4:3 source appears larger. ❑ Twin View does not display channels that are blocked by parental settings (see page 118
  • Sony KDS-70Q006 | Owners Guide - Page 78
    the right picture (if not already activated). 2 Press V to enlarge the picture and v to reduce the picture. ✍ When you adjust the picture sizes in Twin View, the SXRD projection TV memorizes the change. The next time you use the Twin
  • Sony KDS-70Q006 | Owners Guide - Page 79
    using the Add to Favorites feature in the Favorite Channels guide. Using the Channel Menu z For details on using enter the channel number that you want to assign to the Favorite Channel number. A preview a Favorite Channel. ✍ To enter digital channel numbers in step 4, use the 0-9, ENTER buttons.
  • Sony KDS-70Q006 | Owners Guide - Page 80
    Using the Features Using the Favorite Channels Guide 1 Press FAVORITES. The Favorite Channels list appears. Favorite Channels Add to Favorites 1 8.14 PBS 2 15.8 NBC 3 27 HGTV 4 45.12 TNT 5 98 CNN 6 112.3 ESPN 7
  • Sony KDS-70Q006 | Owners Guide - Page 81
    as phone numbers, recipes, etc. ✍ The Freeze feature is not available if you are using Favorite Channels (see page 77) or Twin View (see page 74). To use the Freeze function 1 When the program information you want to capture is displayed on the screen, press FREEZE. 2 The SXRD projection TV switches
  • Sony KDS-70Q006 | Owners Guide - Page 82
  • Sony KDS-70Q006 | Owners Guide - Page 83
    external data storage. The Memory Stick Viewer on your SXRD projection TV allows you to view files that are stored on Memory Stick media. You can view: ❑ Digital photos (JPEG files) ❑ Movies is inserted into your photo printer (not supplied) ❑ Lock (protect) or delete files on the Memory Stick 81
  • Sony KDS-70Q006 | Owners Guide - Page 84
    hardware devices. Memory Stick PRO in this SXRD projection TV has been tested to support up to 1 GB media capacity and does not support high-speed transfer, MagicGate copyright protection technology, or access control security features. Sony cannot guarantee or assure the Memory Stick functionality
  • Sony KDS-70Q006 | Owners Guide - Page 85
    the following file name extensions: File Type JPEG MPEG1 Supported File Name Extensions .jpg .jpeg .mpg .mpeg Trademark Information Memory Stick, Memory Stick Duo, Memory Stick PRO, Memory Stick PRO Duo, and MagicGate are trademarks of Sony Corporation. * Some variations of MPEG1 movies may not
  • Sony KDS-70Q006 | Owners Guide - Page 86
    should slide in with little resistance and click into place. STD / DUO STD / DUO POWER ✍ Be sure to insert the Memory Stick in the correct direction. Forcing the Memory Stick Stick slot may damage the SXRD projection TV. To remove the Memory Stick, see "Removing a Memory Stick" on page 86.
  • Sony KDS-70Q006 | Owners Guide - Page 87
    Memory Stick recording medium. ✍ CAUTION: The Memory Stick slot on your TV has been designed to accommodate standard and compact versions of Memory Stick. to the Memory Stick Duo and the SXRD projection TV. Insert the Memory Stick Duo as shown below. STD / DUO POWER S To remove the Memory Stick Duo
  • Sony KDS-70Q006 | Owners Guide - Page 88
    Using the Memory Stick Viewer Removing a Memory Stick 1 Check that the Memory Stick indicator is off. (When the light is on, this indicates that the SXRD projection TV is reading data from the Memory Stick.) ✍ Removing the Memory Stick while a file is being accessed (when the Memory Stick
  • Sony KDS-70Q006 | Owners Guide - Page 89
    the Memory Stick Viewer Using the Memory Stick Viewer Using the Memory Stick Index Turn on the SXRD projection TV and insert a Memory Stick that contains the photo or movie files you want to view. To insert a Memory Stick, see "Inserting a Memory Stick" on page 84. ✍ If the Memory Stick Index
  • Sony KDS-70Q006 | Owners Guide - Page 90
    Stick Menu bar to access additional options Y Do This ... Press V v B b. Press . For details, see "Viewing Photos" on page 89 and "Playing Movies" on page 92. 1 Press v to select V. 2 Press v to displayed thumbnails, or v to display the next page of thumbnails. Press on the remote control. 88
  • Sony KDS-70Q006 | Owners Guide - Page 91
    View File ✍ JPEGs captured using a digital video camera may appear to display motion in full screen. This is a result of the way digital video cameras record still images, and is not a result of a malfunction with the SXRD projection TV bar Exit Memory Stick Viewer Press on the remote control. 89
  • Sony KDS-70Q006 | Owners Guide - Page 92
    menu. For details, see "Slide Show Menu Options" on page 94. View Rotate Allows you to rotate the photo in 90 degree increments clockwise or indicate the number of prints to make of the specific photo when the Memory Stick is inserted into a compatible photo printer (not supplied). Delete
  • Sony KDS-70Q006 | Owners Guide - Page 93
    Pan a photo 1 In the Photo menu bar, press B or b to highlight View. 2 Press V or v to highlight Zoom/Pan and press . 3 Specify the Pan, press . Press B or b to highlight Exit and press . Press on the remote control. Using Rotate z You cannot rotate a photo that has been protected. see "Protect"
  • Sony KDS-70Q006 | Owners Guide - Page 94
    with Sony digital cameras cannot be played back with the Memory Stick Viewer. Movie Controls z The quality of the movie when enlarged depends on the resolution of the MPEG1 file. See your camera's instruction manual for the Movie menu bar Exit Memory Stick Viewer Press on the remote control. 92
  • Sony KDS-70Q006 | Owners Guide - Page 95
    Using the Memory Stick Viewer Movie Menu Bar Options z MPEG1 files that are protected are indicated by the Lock icon. To access the Movie menu bar 1 Use V or v to highlight Index in the Movie menu bar. 2 Press B or b to select Index, Slide Show, or File. 3 Press V or v to select the desired option
  • Sony KDS-70Q006 | Owners Guide - Page 96
    not played. Piano (Built-in music) Plays the MP3 file stored in the SXRD projection TV's internal memory. (List of MP3 Files) Displays a list of all MP3 files about 6 seconds. Slow Slide advances after about 12 seconds. Manual advance Slide advances only after you press B or b. Determines
  • Sony KDS-70Q006 | Owners Guide - Page 97
    Folder File Order Filter Description Allows you to select different folders to view in the Memory Stick Viewer. Digital Camera Folders Selects all folders within the directories defined by the DCF rules used by Sony digital cameras (see page 96). JPEG and MPEG1 files in those
  • Sony KDS-70Q006 | Owners Guide - Page 98
    Names Most Sony brand digital still and video cameras automatically record still photo and movie files using DCF compliant directory and file names. If you selected the Digital Camera Folders option, as described on page 95, you might want to have your digital camera's instruction manual handy in
  • Sony KDS-70Q006 | Owners Guide - Page 99
    : ❑ To avoid permanent damage to still image data, do not turn off the SXRD projection TV or remove Memory Stick media from the insertion slot while data is being read (as indicated by the Memory Stick indicator light being on). ❑ Avoid touching the terminal of Memory Stick media or bringing it into
  • Sony KDS-70Q006 | Owners Guide - Page 100
  • Sony KDS-70Q006 | Owners Guide - Page 101
    with each other. Using i.LINK Cables This SXRD projection TV has three S400 i.LINK terminals (one in the front panel, and two in the back panel). You can use the following i.LINK cables with this SXRD projection TV: 4-pin i.LINK cable Sony Model Length VMC-IL4415 1.5 meters VMC-IL4435
  • Sony KDS-70Q006 | Owners Guide - Page 102
    read the instruction manual of the i.LINK device to be connected. To connect a digital i.LINK device (using only a digital signal) 1 Using an i.LINK cable (see page 99), connect the device's i.LINK jack to either of the SXRD projection TV's i.LINK jacks. To connect an i.LINK device that supports an
  • Sony KDS-70Q006 | Owners Guide - Page 103
    The SXRD projection TV automatically recognizes the device as soon as the connection is made. Set up an i.LINK device that supports an D i.LINK E i.LINK You can connect up to 63 i.LINK devices. However, the maximum number of cables in any serial route is 16. A B i.LINK C i.LINK D i.LINK E
  • Sony KDS-70Q006 | Owners Guide - Page 104
    on the remote control. i.LINK Device List DTV Digital VCR Sony DTV Status: Viewing. 102 The SXRD projection TV (DTV), along with all devices connected by i.LINK to the SXRD projection TV, appear on the i.LINK Device List. Devices that are not supported by the SXRD projection TV appear on the
  • Sony KDS-70Q006 | Owners Guide - Page 105
    the SXRD projection TV displays the i.LINK Control Panel, which allows you to use the SXRD projection TV's remote to view the i.LINK device full- screen. ✍ To exit i.LINK mode, select DTV from the Device List or press CH+/-. i.LINK Control Panel 52.3 Back to Device List Setup Exit i.LINK Power
  • Sony KDS-70Q006 | Owners Guide - Page 106
    on the SXRD projection TV's remote control. To program the remote control to operate i.LINK devices, see "Programming the Remote Control" supported for all i.LINK devices. ❑ If you are using a digital VCR, turn off any Auto LINC functionality of the VCR. For details, see the digital VCR's user manual
  • Sony KDS-70Q006 | Owners Guide - Page 107
    of which are also available through the Digital Program Guide (described on page 71). To set up the Analog Video Power Swap Audio Full Screen Sony DV-VCR Using SXRD projection TV can act as an i.LINK repeater, so that i.LINK signals are be relayed to another device even when the TV is powered
  • Sony KDS-70Q006 | Owners Guide - Page 108
  • Sony KDS-70Q006 | Owners Guide - Page 109
    the specific menu page for instructions on moving through the on your TV. The problem. The Channel Menu allows you to set up a Favorite 116 Channels list, run the Auto Program function, label channels, and more. The Parent Menu lets you control the viewing of programs 118 based on their ratings
  • Sony KDS-70Q006 | Owners Guide - Page 110
    screen. To restore the factory default settings for the Video settings: ❑ Press RESET on the remote control when in the Video menu. Selecting Video Options z To quickly and picture settings. Recommended for picture home entertainment. viewing Pro Select to display a picture with minimum
  • Sony KDS-70Q006 | Owners Guide - Page 111
    Using the Menus z Direct Mode is not available when watching 480p or 720p sources. Option Description Color Temp. Choose from three color temperatures: White intensity adjustment Cool Neutral Warm Select to give the white colors a blue tint. Select to give the white colors a neutral tint.
  • Sony KDS-70Q006 | Owners Guide - Page 112
    the setting, press . To return the Custom options to the default factory settings, press the RESET button. ✍ DRC Palette is not available when watching 480p, 720p and 1080i sources, when using multi-picture functions (Twin View, Freeze or Memory Stick), or when Direct Mode is set to On or Game Mode
  • Sony KDS-70Q006 | Owners Guide - Page 113
    and decoding process. It is especially effective for watching a DVD or digital TV picture. Select from High, Medium, Low and Off. ✍ BN Smoother may 720p, and 1080i sources, or when using multi-picture functions (Twin View, Freeze or Memory Stick). Cinema Emphasizes the black color. Black Pro On
  • Sony KDS-70Q006 | Owners Guide - Page 114
    desired setting. 7 Press MENU to exit the menu screen. To restore the factory default settings for Treble, Bass and Balance ❑ Press RESET on the remote control when in the Audio menu. Selecting Audio Options z Dolby Virtual and TruSurround attempt to create the same surround effect produced by
  • Sony KDS-70Q006 | Owners Guide - Page 115
    , but the audio output from your audio system can still be controlled by the SXRD projection TV's remote control. Fixed The SXRD projection TV's speakers are turned off and the audio output of the SXRD projection TV is fixed. Use your audio receiver's volume control to adjust the volume (and other
  • Sony KDS-70Q006 | Owners Guide - Page 116
    z Wide Mode is unavailable while using Twin View (page 74), Freeze (page 79) or Mode setting to another, use WIDE on the remote control (see page 72). Game Picture Adjust Allows while watching the picture to be adjusted. The SXRD projection TV stores the position in memory for each input.
  • Sony KDS-70Q006 | Owners Guide - Page 117
    channel. When you change channels (or inputs), Wide Mode is automatically replaced with the 4:3 Default setting. To retain the current Wide Mode setting as or input is changed. Select to display the picture within the normal viewing area of the screen. Select to reduce the size of the picture
  • Sony KDS-70Q006 | Owners Guide - Page 118
    " on page 77. Channel Fix Off Turns off Channel Fix. Useful when you 2-6 have a cable box or satellite receiver connected "Fix" your SXRD projection TV's channel setting to one channel (2-6) and use the cable box, VCR or satellite receiver to change channels. Select one of these settings if you
  • Sony KDS-70Q006 | Owners Guide - Page 119
    you to show or hide channels that appear in the Program Guide (see page 70) and when you use the CH+/- buttons to channel surf. Channels as station call letters) to channel numbers. 1 Press V v to scroll through the channel numbers. Then press to select the channel number that you want to assign a
  • Sony KDS-70Q006 | Owners Guide - Page 120
    Using the Menus Using the Parent Menu The Parent menu allows you to set up the SXRD projection TV to block programs according to their content and rating levels. To select the Parent menu 1 Press MENU. 2 Press V or v to highlight the Parent icon and press Antenna Parental Lock Password . 3 Use
  • Sony KDS-70Q006 | Owners Guide - Page 121
    exit the menu screen. Viewing Blocked Programs You can view a blocked program by entering the password. 1 Press ENTER when tuned to a blocked program. 2 Enter your password using the 0-9 buttons. Parental control will be canceled temporarily until you turn your SXRD projection TV off. Using the
  • Sony KDS-70Q006 | Owners Guide - Page 122
    -13 Parental guidance for children under 13. R Restricted viewing, parental guidance is suggested for children under 17. NC-17 No one 17 and under. and X TV Rating Age-Based Options Block programs by their rating, content or both TV-Y TV-Y7 TV-G All children. Directed to children age 7 and
  • Sony KDS-70Q006 | Owners Guide - Page 123
    Using the Menus Canadian custom rating options If you selected Canada as the country of residence on page 119, the Custom Rating menu includes the following options. (If you selected U.S.A., see page 120.) Option English Rating French Rating U.S.A. Rating Description C All children. C8+
  • Sony KDS-70Q006 | Owners Guide - Page 124
    Language English i.LINK Standby Off Menu Color Gray High Altitude Off Illuminated Yes Power Saving Standard 5 Use the arrow buttons to scroll through the options. 6 (if the broadcaster offers this service). Displays when the channel is changed or the DISPLAY button is pressed. 122
  • Sony KDS-70Q006 | Owners Guide - Page 125
    . On Select to use the SXRD projection TV at an altitude of 5,000 feet (1,500 m) or higher. Off Select to use the SXRD projection TV at normal altitude. Allows you to illuminate the Sony logo on the front panel of the TV. Yes Illuminates the Sony logo while the power is turned on. No
  • Sony KDS-70Q006 | Owners Guide - Page 126
    Using the Menus Programming Caption Vision Option Power Saving Description Standard Reduced Select to view picture without the benefit of Power Saving. Select to view picture with reduced power consumption. The picture becomes darker, but also enhances the black level. If you selected the
  • Sony KDS-70Q006 | Owners Guide - Page 127
    page 88. Displays the i.LINK Device List. For details, see page 102. Select to set the clock and to program your SXRD projection TV to turn on and off at two scheduled viewing times. Sleep Allows you to select the amount of time (15 minutes, 30 minutes, 45 minutes, 60 minutes, 90 minutes or
  • Sony KDS-70Q006 | Owners Guide - Page 128
    channel number. reset. Set the clock or timer again. Diagnostics Display diagnostics information about the TV. This can be useful in providing information to an authorized technician or repair person. CableCARD This list of selectable CableCARD options will vary, depending on your cable service
  • Sony KDS-70Q006 | Owners Guide - Page 129
    Other Information Overview This chapter includes the following topics: Topic Glossary Contacting Sony Troubleshooting Flashing Indicators on the Front of the TV Specifications Optional Accessories Index Page 128 129 129 137 138 140 141 Other Information 127
  • Sony KDS-70Q006 | Owners Guide - Page 130
    HDMI supports enhanced, or high-definition video, plus two-channel digital audio. A unit of the Federal Communications Commission, Washington, DC, that establishes television standards in the United States, such as NTSC Color, the standard used in this SXRD projection TV. Radio Frequency. That part
  • Sony KDS-70Q006 | Owners Guide - Page 131
    (7669) (Canadian residents only). Before calling Sony customer support, please write down the model and serial numbers of your TV. You'll find this information on the front cover of this manual. Troubleshooting Twin View Problem Possible Remedies I cannot get Twin View to work ❏ ❏ ❏ If you are
  • Sony KDS-70Q006 | Owners Guide - Page 132
    replaced the batteries to the remote recently, the code numbers for the video equipment may need to be reset. ❏ There may be more than one code for the equipment that you are attempting to operate. ❏ There is a possibility that some non-Sony equipment cannot be operated by your Sony SXRD projection
  • Sony KDS-70Q006 | Owners Guide - Page 133
    Problem Folder is selected (see page 95). ❏ The maximum number of files the Memory Stick Viewer can display is 2,000 screen not a result of a malfunction with the SXRD projection TV. Rotation not saved after ❏ The Memory Stick might Sony digital cameras cannot be played back with the Memory Stick
  • Sony KDS-70Q006 | Owners Guide - Page 134
    Problem MPEG1 quality is poor when enlarged (page 92) Error message is displayed Error icon is displayed Possible Remedies ❏ The quality of the movie when enlarged depends on the resolution of the MPEG1 file. See your camera's instruction manual is not supported). The thumbnail is not DCF
  • Sony KDS-70Q006 | Owners Guide - Page 135
    Video Problem Possible Remedies No picture (screen not lit), no ❏ If your SXRD projection TV does not turn on, and a red light keeps flashing, your sound SXRD projection TV may need service. Call your local Sony Service Center. ❏ Make sure the power cord is plugged in. ❏ Press POWER on
  • Sony KDS-70Q006 | Owners Guide - Page 136
    together. ❏ Increase the volume of the cable box using the cable box's remote control. Then press FUNCTION repeatedly until the SXRD projection TV indicator lights up and adjust the SXRD projection TV's volume. ❏ The SXRD projection TV's audio might be set to Auto SAP or Mono, when it might be
  • Sony KDS-70Q006 | Owners Guide - Page 137
    Digital Setup menu (see page 117). Other Information General Problem Possible Remedies How to reset TV to factory settings ❏ Turn on the TV. While holding down the RESET button on the remote control, press the POWER button on the TV. (The TV will turn itself off, then back on again.) Release
  • Sony KDS-70Q006 | Owners Guide - Page 138
    using a digital VCR, turn off any Auto LINC functionality of the VCR. For details, see the digital VCR's user manual. The TV does not turn on ❏ The SXRD projection TV cools down its projection lamp when the power is turned off. It takes up to two minutes for the picture to come back after the
  • Sony KDS-70Q006 | Owners Guide - Page 139
    the SXRD projection TV enters the standby mode (see page 26). The LAMP indicator flashes. ❑ The lamp for the light source has burned out. Replace it with a new one (see page 20). If the SXRD projection TV does not function properly after correcting the problems, contact qualified Sony personnel
  • Sony KDS-70Q006 | Owners Guide - Page 140
    Channel Coverage Power Requirements Inputs/Outputs HDMI IN Video (IN) S Video (IN) Audio (IN) Component Video Input CONTROL S (IN) CONTROL S (OUT) AUDIO (VAR/FIX) OUT i.LINK RF Inputs Digital Audio Optical Output (PCM/Dolby Digital) 3 SXRD Panel, 1 lens projection system 0.78 inch SXRD panel 6,220
  • Sony KDS-70Q006 | Owners Guide - Page 141
    Slot Speaker Output Dimensions (W × H × D) Mass Power Consumption In Use In Standby In i.LINK/CableCARD Standby Supplied Accessories Remote Control AA (R6) Batteries Cleaning Cloth AC Power Cord Anti-Static Cleaning Brush Slot Covers Owner's Guide Quick Setup Guide Warranty Product Registration
  • Sony KDS-70Q006 | Owners Guide - Page 142
    Other Information Optional Accessories ❑ HDMI cable ❑ Component video cable ❑ S VIDEO cable ❑ A/V cable ❑ Audio cable ❑ Optical cable ❑ Control S cable : RK-G69 ❑ TV Stand : SU-SX10 ❑ Lamp : XL-5000 ❑ i.LINK cables: VMC-IL4415 (4-pin to 4-pin, 1.5 meters); VMC-IL4435 (4-pin to 4-pin, 3.5 meters) 140
  • Sony KDS-70Q006 | Owners Guide - Page 143
    with TV remote control 67 with A/V connectors, connecting 49 with component video connectors, connecting 48 Dynamic 112 E Effect 112 English Rating 121 using 79 French Rating 121 Front Panel 26-27 FUNCTION button 62 G Game Mode 109 Game Picture 114 Gamma Corrector 111 GUIDE button 62, 70 H HD/DVD
  • Sony KDS-70Q006 | Owners Guide - Page 144
    124 POWER/STANDBY indicator 26, 137 Problems, troubleshooting 129- 136 Program Guide menu 70-71 Program Options menu 71 R Ratings setting 120 viewing blocked programs 119 Rear panel 27-29 REC button 63 Remote control button descriptions 62-63 inserting batteries 61 programming 64 Repeat 94 RESET
  • Sony KDS-70Q006 | Owners Guide - Page 145
    Rating 121 Unrated 120 V VCR using with TV remote control 66 with cable box, connecting 42 with cable, connecting 41 with satellite receiver and cable, connecting 46 Vertical Center 115 Vertical Size 115 VHF/UHF jack 29 Video inputs, labeling 123 VIDEO L(MONO)-AUDIO-R 27 Video Menu 107, 108 View
  • Sony KDS-70Q006 | Owners Guide - Page 146
  • Sony KDS-70Q006 | Owners Guide - Page 147
    Printed on 100% recycled paper.
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147